It's inevitable for-hot-rolled silicon steel sheets to produce oxidized scale in the process.
热轧硅钢片在生产过程中不可避免地会产生氧化铁皮。
The mechanism and cause of edge cracking defect of hot-rolled strip in Kunming Iron & Steel co.
对昆钢热轧板卷边裂缺陷机理及成因进行了研究分析，提出了相应的预防控制措施，取得了较好的效果。
The application on a certain hot-rolled steel production line has demonstrated its effectiveness.
在某钢铁企业热轧生产线上实际应用中，取得了良好的应用效果。
Enviromental properties of hot-rolled steel sheets were analysed and assessed by using LCA method.
从LCA角度对普通热轧钢板的环境协调性能进行了分析和评价。
P enhances the strength of hot-rolled if steel significantly, but it also reduces its deep draw ability.
可显著提高热轧if钢的强度，但同时也导致其深冲性能降低。
A variety of hot-rolled bar, cold drawn bar and a variety of year-round agency specifications of the bar.
各种规格热轧圆钢，冷拉圆钢及常年所代理公司的各种规格圆钢。
This thesis introduces the research work of hot-rolled drawing steel sheet which is first developed successfully in China.
本论文工作正是国内首次对于热轧拉延钢板所进行的成功的实验室研究。
We use hot-rolled steel to produce cold rolled coils and other high-value added products at the Lipetsk plant and VIZ-Stal.
我们利佩茨克工厂和维兹工厂里使用热轧钢板生产冷轧板卷和其他高附加值产品。
The process research on reducing the coil break defect of continuous hot-rolled strip and production control were introduced.
介绍减少热连轧钢卷横折缺陷的工艺研究和生产控制情况。
This paper describes the hot-rolled energy consumption, the impact factors on energy consumption and the improvement direction.
阐述了钢铁企业热轧能耗的状况、能耗的影响因素和改进的方向。
This paper presents an artificial neural network model to predict the rolling force to control hot-rolled strip strip thickness.
研究了热轧板带厚度控制中轧制力预报环节的局部逼近神经网络实现方法。
The formula is put forward for calculating the ultimate bond stress and the anchorage length of hot-rolled deformed bars and reactive powder concrete.
提出普通热轧变形钢筋与活性粉末混凝土的极限粘结强度与锚固长度的计算公式。
The chemical components and microstructure are analyzed for the hot-rolled reinforced bar, of which the yield point is not so clear, some measures proposed.
对存在屈服点不明显问题的热轧带肋钢筋的化学成分和组织进行了分析，提出了改进措施。
The reason for longitudinal bright trace appeared on the hot-rolled strip is analyzed on the basis of its appearance and regular pattern as well as its control method.
根据热轧带钢生产过程中出现纵向亮带的表现形态和规律，分析了其产生的原因和控制方法，从而达到了提高热轧带钢板形质量的目的。
Process of rolling cold coils of pickled hot-rolled sheet through a cold reduction mill to make the stainless steel stronger, thinner, and smoother by applying pressure.
通过冷轧工厂轧制热轧的、酸洗的不锈钢薄板使不锈钢在压力作用下更薄、强度更高、更光滑。
The paper reviews the application of cold-rolled, hot-rolled steel sheet and round steels in the cab and chassis of domestic heavy truck, and discusses the methods to reduce automotive dead weight.
综述了国内重型汽车驾驶室和底盘用量较大的钢材——冷轧钢板、热轧钢板和圆钢在重型汽车上的应用现状，讨论和分析了降低汽车自重的途径和方法。
In the baggage cars, kelps, fishplate, rolled iron, sleepers, wire rods, plates and sheets, laminated articles, hot rolled hoops, splints and mortar carriages, and Zorès ore.
车里装着海带、鱼尾板、钢材、枕木、盘钢、厚金属板、叠合材料、热轧钢箍、软木条和迫击炮车，以及佐泽斯矿石。
SEM and XRD results show that the composite that is hot rolled after vacuum forming, has relatively high density and can avoid being oxidized effectively.
结果表明，采用真空热压后热轧工艺制备的碳纳米管铜基复合材料的致密度较高且能有效地防止被氧化。
This paper describes the experimental results of the strength and stamping forming property of the hot rolled titanium steel plates, and presents their application in automotive production.
叙述了热轧钛钢板的强度和冲压成形性能的试验结果，介绍了钛钢板在汽车生产中的应用。
The structure and installation of the pipe nozzles have important effect on the cooling process of hot rolled strip and plate.
冷却集管及喷嘴的结构和安装对于热轧板带层流冷却效果有重要的影响。
Ferritic rolling is an economical process which is used to produce ultra thin gauge hot rolled strip with better deep draw ability.
铁素体轧制工艺是经济地生产具有良好性能的超薄规格热轧板卷的一项有效的生产工艺。
Production hot rolled ultra thin strip can bring good benefits, but increase the difficulties of rolling.
生产热轧薄带在给企业带来丰厚效益的同时，也使生产难度增加。
The results show that these cracks are caused by the inclusions of rare earth sulphur oxides and alumina distributing in mass in base steel for hot rolled wide strips.
结果表明：管坯裂纹是因热轧宽钢带基材中存在大量聚集分布的稀土硫氧化物和氧化铝夹杂所致。
In order to eliminate the red scale on surface of hot rolled strip, the descaling and rolling experiments in lab and industrial trials were carried out.
为了解决热轧卷板生产中出现的表面红色氧化铁皮问题，进行了实验室除鳞热轧实验以及调整轧制工艺的工业性试验。
The composition and forming mechanism of black strips on Al-Zn-Mg-Cu hot rolled plates were studied.
研究了热轧高锌合金板材表面黑条缺陷的成分、产生机理及消除方法。
Through improving the working processes of Austenite hot - rolled stainless strips, its edge quality is improved.
通过采取合理的工艺措施，使奥氏体热轧不锈钢的边部质量得到了根本改善。
Hot rolled stainless steel bars that are annealed and cold worked to produce a higher surface quality and higher strength.
经过退火及冷加工的热轧不锈钢棒材，其表面质量更高，强度也更高。
The results showed that high cooling rate of hot rolled billet resulted in abnormal microstructure formation and high hardness, which caused shear cracking.
结果表明，原材料热轧后冷速过快，造成组织异常，硬度偏高，导致了剪切开裂。
The scale defect is an important influence factor on surface quality of hot rolled strip.
氧化铁皮缺陷是影响热轧带钢表面质量的重要因素之一。
The scale defect is an important influence factor on surface quality of hot rolled strip.
氧化铁皮缺陷是影响热轧带钢表面质量的重要因素之一。
应用推荐