A. Surface of Stainless steel and high alloy steels; Not painted.
不锈钢及高合金钢的表面不需刷漆。
Notes: 1. Generally no corrosion allowance is added for high alloy and nonferrous internals.
注:1、对于高合金及非铁内件通常不加腐蚀余度。
Lye for the use of high-temperature titanium and titanium alloy or high alloy stainless steel.
对于高温碱液多采用钛及钛合金或者高合金不锈钢。
In case of high alloy steel or nonferrous materials, liquid penetrate method can be substituted.
在使用高合金钢或无铁材料时,可用渗透探伤进行检测。
The effect of heating temperature on abrasion resistance of high alloy wear-resistant cast iron was studied.
研究了加热温度对高合金耐磨铸铁耐磨性的影响。
The tapered plug is precision ground from hardened high alloy material or an overlaid stainless to assure a tight seal and easy operation.
锥形阀塞经过精密研磨,采用硬化高合金材料或一种镀层不锈钢,确保紧密密封和操作容易。
The results show that the resistance of low carbon high alloy steel is better than that of the high manganese steel under the same test condition.
结果表明,在相同试验条件下低碳高合金钢的冲击腐蚀磨损性能要优于高锰钢的。
A new filtration technique for purification of carbon, stainless, high speed, low and high alloy steel castings in investment casting was investigated.
研究了在熔模精密铸造中过滤净化碳钢、低合金钢和高合金钢等铸钢件的过滤新技术。
Suitable for a wide range of low and high alloy steels, titanium alloys, austenitic stainless steels, heat resistant alloys, fibre glass reinforced plastics etc.
适合于低合金钢、高合金钢、钛合金、奥氏体不锈钢、耐热合金、玻璃纤维强化塑料等。
The Influence of the quenching and tempering treatment and the different subcritical treatment on microstrcture and property of a high alloy white cast iron was studied.
研究表明,通过亚临界热处理可以使含有大量残留奥氏体的高铬铸铁产生二次硬化,从而提高高铬铸铁的硬度和耐磨性。
The gross section fine grain material can be obtained by radial forging. One heat forging from ingot to finished products of high alloy with hard deformation can be realized.
径向锻造可获得全截面细晶材料,并实现高合金难变形材料由锭到材的一火次锻造。
The results show that as-annealed microstructure and as-quenched-tempered microstructure of the low carbon high alloy steel added nickel are both single-phase lath martensite.
结果表明:加镍低碳高合金钢无论退火态还是淬火回火态,其组织均为单相板条马氏体;
In the cross piercing process, as the piercing precession power can not overcome the resistance force, it will lead to rear-jamming when rolling thick-wall tubes or high alloy tubes.
在斜轧穿孔过程中,由于轧件旋进力克服不了顶头的阻力,因此轧制厚壁管或高合金钢管时在穿孔后期造成后轧卡。
Wear loss of specimens for these two steels during a certain time show that low carbon high alloy steel is much more resistant to corrosive impact abrasion than high manganese steel.
比较两种材料试样在一定时间内的失重变化情况,表明低碳高合金钢的抗冲击腐蚀磨损性能优于高锰钢。
Based on the ordinary high chromium cast iron foundation, designed one kind of high alloy abrasion-resisting cast iron material which is used to make the lining iron of the screw grader.
在普通高铬铸铁的基础上,研制了一种用于制造螺旋分级机小叶片的高合金耐磨铸铁材料。
The effect of heat treatment on structure and hardness of high alloy iron based hardfacing layer metal was studied and the result obtained is of guiding significance for it's application.
研究了热处理对高合金铁基堆焊层组织和硬度的影响,所得结果对其应用有一定的指导意义。
Where backing welds are radiographed for their full length to meet code requirements before clad side high alloy welding is done, this requirement may be omitted with prior approval of the Purchaser.
在复合侧高合金焊接之前,如果要对打底焊道在全长上进行射线检测,则事先经买方同意后可忽略此项要求。
Thus transport of sulfuric acid pump usually high silicon cast iron (casting and processing is very difficult), high-alloy stainless steel (alloy No. 20) to create.
因此输送硫酸的泵阀通常采用高硅铸铁(铸造及加工难度大)、高合金不锈钢(20号合金)制造。
Difficult-cutting high-alloy cast iron. Nodular cast iron.
难加工的高合金铸铁。球墨铸铁。
Difficult-cutting high-alloy cast iron.
难加工的高合金铸铁。
Difficult-cutting high-alloy cast iron.
难加工的高合金铸铁。
应用推荐