Your Rx: The biggest benefits come from cooked tomatoes (think pasta sauce!), since the heating process increases the amount of lycopene your body is able to absorb.
你的处方：最受益的是煮过的西红柿（如西红柿沙司），因为加热的过程会增加人体可以吸收利用的番茄红素。
This technology has important value to discover the rule of induction heating process, optimize process parameters and drive technology progress.
该技术对揭示铸坯感应加热过程的规律、优化工艺参数、推动技术进步具有重要的应用价值。
To convert into graphite, as by a heating process.
使转化为石墨，如通过加热过程。
The film shrinkage in heating process in shrink packaging machine is of dynamic nature.
收缩薄膜在烘道式收缩包装机中的加热过程具有动态性质。
The effect of heating process on surface oxidation of copper-bearing steel was studied.
研究了加热工艺对含铜钢表面氧化的影响。
I have found that the use of a turntable during the heating process makes a significant difference.
我发现，一个转盘在加热过程中的使用会产生重大差别。
Temperature field measurement in industrial combustion or heating process is of great significance.
温度场检测在工业燃烧或加热过程中具有重要意义。
The results can, at least qualitatively, depict the coupling effects on gasdynamic heating process.
这些结果能够定性地反映出耦合性在气动加热问题上的影响。
In the heating process of rolling reduction of fuel consumption and ignition loss is of great significance.
轧钢加热过程中，降低燃耗与烧损具有重要意义。
The welding process of the welding workpieces, uneven heating process is partial and uneven cooling process.
焊接过程对被焊工件来说，是局部的不均匀加热过程和不均匀冷却过程。
In some induction heating process, induction coil is connected with power source through connecting power cable.
在某些特殊工艺的感应加热中，感应线圈需要通过延伸电缆与电源连接。
Not only the potato protein was extracted, but the waste water was purified after the PI sedimentation and heating process.
酸沉、加热等工艺既能提取蛋白质，又起到净化淀粉废水的效果。
The activity of enzymes in honey is reduced during heating process, and injurant hydroxymethylfurfural(HMF) forms synchronously.
热处理会造成蜂蜜中生物酶活性的损失，同时还会生成有害物质羟甲基糠醛（HMF）。
Many heating process with smoking gas involves the uniformity problem of flow distribution with larger flux in multi-branch pipe.
许多烟气加热过程涉及到较大流量多支管流量分配均匀性问题。
The induction heating process of barrel was analyzed, and the temperature distribution and its variation with time were obtained.
分析了料筒的感应透热过程，得到了料筒内的温度分布状况以及温度随时间的变化规律。
The efficiency of heating stations also could be predicted with the method if the oil amount consumed in heating process were known.
根据输送过程实际加热耗油量，应用评价曲线还可动态地评估热站的实际综合运行效率。
It is pointed out that the source of crack is formed during the fast heating process and expanded following the fast cooling process.
即裂纹源产生于快速加热过程并在随后的快速冷却中得以扩展。
The heating process USES tremendous amounts of energy, which is typically generated using coal, the most carbon-intensive fossil fuel.
加热过程中需要消耗巨大的能量，而能量的来源即对碳密集程度最高的矿物燃料——煤炭的燃烧。
Edge heating process can uniform the temperature of hot rolled stip and then benefit the property and dimension precision of the strip.
边部加热对于均化热轧带钢横向温度分布、提高产品性能及尺寸精度具有重要影响。
The efficiency of heating stations could also be predicted by means of the method if the oil amount consumed in heating process were known.
根据输送过程实际加热耗油量，应用评价曲线可以方便地评估热站的实际综合运行效率。
Abstract: the traditional heating furnace control system is based on some model, it is difficult to guarantee the demand of heating process.
摘要：传统的加热炉控制系统大多建立在一定的模型基础上，难以保证加热工艺要求。
The induction heating process of cylinder workpiece was analyzed, and the temperature distribution and its variation with time were obtained.
分析了圆柱工件的感应透热过程，得到了坯料内的温度分布状况以及温度随时间的变化规律。
When the temperature in the boiled water chamber is reduced to a certain degree and the thermostat is switched on, the heating process is continued.
当沸水室温度下降到一定程度，温控器又接通，继续加热。
The validity of optimization control system for coke oven heating process based on the theory of hybrid control system is improved by the running results.
实际运行结果证明，基于混杂理论的焦炉加热过程温度智能控制系统能够比较好的适应焦炉生产中的复杂工况。
In this thesis, the heating process of the web-stripe hot furnace is studied deeply; the main factors of affecting control accuracy production quality are analyzed too.
本文对网带式加热炉的加热过程进行了深入的研究，分析了影响产品质量和控制精度的主要因素。
Based on induction heating theory, prediction model of CC slab temperature distribution was built and numerical simulation for induction heating process was carried out.
本文应用感应加热理论，建立了连铸坯料温度分布的预测模型，对感应加热过程进行了数值模拟。
Near infrared (NIR) spectroscopy in combination with two-dimensional correlation analysis were applied to investigate the heating process of a deuterated nylon 1010 film.
采用近红外光谱技术和二维相关分析法研究尼龙1010膜在升温过程中的结构变化。
Considering practical ring shaped heating furnace of a certain company, a threedimensional heat transfer mathematic model for tube rounds heating process was established.
针对某公司环形加热炉的实际生产情况，建立了管坯加热过程的三维传热数学模型。
The pipe fitting has the advantages of simple manufacturing process, easy control of the heating process of the pipe fitting, longer service life and good welding quality.
该类管件制造工艺过程简单，管件加热过程易于控制，具有较长的使用寿命，焊接质量好。
The pipe fitting has the advantages of simple manufacturing process, easy control of the heating process of the pipe fitting, longer service life and good welding quality.
该类管件制造工艺过程简单，管件加热过程易于控制，具有较长的使用寿命，焊接质量好。
应用推荐