• Lasers similar to those used for welding in car factories would be fired through telescopes to 'nudge' piles of rubbish left in orbit.

    发射激光的原理就好像是工厂中汽车焊接一样,通过地面的望远镜发射激光,将地球附近的垃圾碎片推离开轨道。

    youdao

  • The technology provided a simple and practicable means for welding thicker molybdenum plates and pipes in work site.

    这为在工程现场焊接较厚的钼板和钼管提供了一种简单可行的方法。

    youdao

  • The laser-arc hybrid welding can improve the depth of fusion, welding speed and assembly gap, so it is a new and promising thermal source for welding.

    激光-电弧复合热源焊接可以增大焊接熔深,提高焊接速度,增大装配间隙,是一种很有前途的新型焊接热源。

    youdao

  • Suite for welding carbon steel and alloy steel.

    适用于焊接低碳钢,低合金钢等金属材料。

    youdao

  • Health standard for welding fume in the air of workplace.

    车间空气中电焊烟尘卫生标准。

    youdao

  • Available for welding of low carbon steel and alloy steel.

    适用于低碳钢、合金钢等材质的焊接。

    youdao

  • Suitable for welding low carbon steel, low alloy steel structure.

    适用于各种低碳钢、低合金钢构件的焊接。

    youdao

  • Suitable for welding of nickel aluminium bronze cast and forged parts.

    适用于镍铝铜材料的铸件和锻造件的焊接。

    youdao

  • Widely used for welding of low carbon steel, wire stainless steel plate etc.

    广泛用于低碳钢板、线材、不锈钢板等材料的焊接。

    youdao

  • There are 65 items in total for welding processing evaluation of heat exchanger.

    用于换热器的焊接工艺评定共有65项。

    youdao

  • Mainly used for welding stainless steel, aluminum, copper and some ferrous metals.

    主要适用于焊接不锈钢、铝、铜及部分有色金属。

    youdao

  • Parameter controls for welding current, travel speed, wire speed and shielding gas.

    参数控制包括焊接电流,焊接速度,送丝速度,保护气。

    youdao

  • And study the influence of welding speed and active gas for welding porosity defect.

    着重研究了焊接速度与活性气体对气孔形成的影响关系。

    youdao

  • A homogeneous weld electrode was developed for welding spheroidal graphite cast iron.

    采用该焊条对球墨铸铁焊接时,可以达到同质焊缝要求。

    youdao

  • An expert system for welding process design for structural steels has been developed.

    本文建立了结构钢焊接工艺设计专家系统。

    youdao

  • The MCCB's operating status in low voltage circuit for welding machine control is a special case.

    低压电焊机控制回路是塑壳式断路器(MCCB)的一种特殊使用状态。

    youdao

  • Low hydrogen electrode to be used for welding thick steel plate to casting and high tensile plates.

    应采用低氢焊条焊接厚钢板与铸钢件和高强度板间的连接。

    youdao

  • Suitable for welding of critical structures of low carbon steel and low-grade strength of low alloy.

    用于焊接较重要的低碳钢结构和强度等级较低的低合金钢。

    youdao

  • Therefore, it is very suitable for welding the thin-wall construction of ferrous and nonferrous metals.

    因此这种电源很适合于黑色及有色金属的薄壁结构件焊接。

    youdao

  • To examine chemistry composition and microstructure of steel wire rod for welding of fracture during drawing.

    对在拉拔过程中出现断裂的焊接用盘条进行化学成分和金相组织检测。

    youdao

  • The effect of electrode wear on indentation depth and weld quality was studied for welding galvanization steels.

    进而分析了点焊镀锌板的电极磨损对压痕深度与焊点质量的影响。

    youdao

  • The working principle of the automatic laser tracking transducer for welding will be described in the present work.

    本文介绍了研制的焊缝激光自动跟踪传感器的工作原理。

    youdao

  • A new fashioned special seam welder for welding the stainless steel band on the rail surface was developed successfully.

    研制了一种新型的钢轨表面不锈钢带专用缝焊机。

    youdao

  • The paper introduces CO_2 arc process and equipment for welding the connecting hole joints of thin steel column radiators.

    介绍了钢制柱型散热器连接孔薄板内孔CO_2自动焊设备及工艺。

    youdao

  • As for welding seams of the same heat treatment state, the hardness of welding seam area depends on different welding wires.

    对于同一种热处理状态的焊缝,焊缝区的硬度取决于不同的焊丝。

    youdao

  • The carbon content being high, this kind of welding rod is not fit for welding machine parts that have to withstand high stress.

    由于含碳量高,所以这种焊条不宜焊接必须承受高应力的机器部件。

    youdao

  • In order to increase the volume deformation rate as LPG bottle broken, a boss-backing has been developed for welding the bottles.

    为提高液化石油气钢瓶破裂时的容积变形率,研制了带有凸台结构的焊接衬圈。

    youdao

  • The development process and functions of a "Compiling expert system" for welding technology on electric locomotives are described.

    介绍一种用于电力机车的焊接工艺制定专家系统的开发过程及功能。

    youdao

  • This gantry type welding machine is an arc welding equipment developed for welding large box type construction of tens meters long.

    本龙门焊机是为焊制几十米长的大型箱式结构件而研制的弧焊设备。

    youdao

  • Introduce welded seam specification, standards performed, inspectation items and acceptable index for welding of body and joint pipe.

    介绍了阀体与接管焊接的焊缝技术要求、执行标准、检验内容及合格指标。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定