Blade is one of the key parts for steam turbine. Working.
叶片是汽轮机的重要零部件之一。
Elastomeric seat materials are not suitable for steam service.
弹性阀座材料不适合于蒸气管道中。
Chinese tendering process for steam turbines and turbo generator.
了解中国汽轮发电机组市场投标过程。
Existing systems for steam coal blending are base on qualities of design coal.
现有的配煤系统大多还是以设计煤种的煤质参数为基础的。
This boiler house provides heat source for steam consumption of the plant area.
本锅炉房为厂区用汽提供热源。
This paper presents some fault diagnosis models for steam turbine blading components.
本文提出了汽轮机通流部分的故障诊断模型。
PurposeTo determine and evaluate reasonable well spacing for steam soaking development.
目的确定和评价蒸汽吞吐开发的合理井距。
The solvent approach requires less energy than heating, pumping, and recycling water for steam.
采用溶剂的方法比加热，抽取，然后再利用生产蒸汽的水资源这一处理过程要消耗更少的能量。
On the basis described, the conditions of abandoned reservoir for steam soak are predicted.
在此基础上，对蒸汽吞吐废弃油藏条件进行了预测。
On-line fault diagnosis for steam turbine rotors is important to the safe operation of power plants.
汽轮机转子在线故障诊断是关系到发电厂安全运行的重要课题之一。
Based on the production practice, the standard of blade steel for steam turbine has been analyzed and discussed.
根据生产实践，对汽轮机叶片用钢标准进行了分析和探讨。
A hierarchical adaptive fuzzy control scheme is proposed for steam generator level control of nuclear power plants.
针对压水堆核动力装置蒸汽发生器的水位控制提出一种分层模糊自适应控制方案。
Based on pattern identification of dynamic process, a kind of control algorithm for steam temperature is introduced.
针对汽温控制系统提出了一种基于动态过程模式识别的控制算法。
Firstly, two defining methods of relative internal efficiency for steam turbine are analyzed from energy equilibrium.
从汽轮机能量平衡的角度出发，对汽轮机相对内效率两种定义方法进行了分析。
This paper introduces the general functions, hardware and software configurations of DEH system for steam turbine control.
介绍了汽轮机数字电液控制系统(即deh系统)的一般功能及硬件、软件的结构。
In calculating the relative change of efficiency for steam turbines, it is essential to select the right change reference.
等效焓降法计算汽轮机组效率相对变化量时，需选择变化基准。
A new control strategy for steam pressure control of pipe-main operating boiler based on expert PID control strategy is presented.
采用基于专家PID控制方法，给出了母管制运行锅炉蒸汽压力系统新的控制策略。
In this paper, the vibration characteristics of frame foundation for steam turbine generator set is performed by model modal test method.
采用模型模态试验方法对汽轮发电机组框架式基础的振动特性进行了研究。
In this paper, the vibration characteristics of frame foundation for steam turbine-generator set are performed by model modal test method.
采用模型模态试验方法对汽轮发电机组框架式基础的振动特性进行了研究。
The security influence of the flushing pipe parameter and the flushing pipe system on-position for steam-water piping system are analyzed.
分析了冲管参数和冲管系统接入位置对汽水管道系统的安全性影响。
Non-piston steam displacement model was established based on steam channeling performance and steam condensate for steam stimulation wells.
然后由非活塞式驱替模型和汽窜动态资料确定井间窜通孔隙体积。
This paper analyses accident cause for steam pipe on Wudang Road and points out some attentive questions to extend as far as pipe engineering.
本文对采用直埋敷设方式的武当山路蒸气支管事故调查和原因进行了分析，提出了应用该技术需注意的问题。
By the experiment of using steam trap of the steam heater, considering the steadiness of control process, gave a suggestion for the choice for steam trap.
通过对蒸汽加热器疏水器运行情况试验，从控制的稳定性考虑，对蒸汽加热器疏水器的选型提出了建议。
The design characteristics, foundry technology and ultrasonic test method of heavy section ductile iron bearings for steam turbines was described and analyzed.
分析了汽轮机厚断面球铁件轴承座的设计特点、铸造技术和超声波探伤。
The results of experimental investigation on heat transfer and fluid pressure drop of spirally fluted titanium-tubes for steam condensation are reported and analyzed.
摘要介绍了钛螺纹槽管传热及流动阻力的实验结果，并对结果进行了分析。
The composition on general Analysis Software of steam turbine Thermal Performance Tests is introduced, and general calculation model of heater for steam turbine is given.
介绍了汽轮机组热力性能试验通用分析软件的组成，给出了汽轮机加热器的通用计算模型。
The scale blocking reasons of steam turbine of cracking gas compressor set for ethylene unit are analyzed, some protections of scale blocking for steam turbine are put forward.
对乙烯装置裂解气压缩机组中的汽轮机发生垢堵的原因进行了分析，并提出了一些预防汽轮机垢堵的措施。
Universal calculation software for steam turbine thermal tests is a computer technology practically applied to steam turbine and other thermal power equipments tests in power plant.
汽轮机热力试验通用计算软件是计算机技术在火电厂汽轮机热力试验及其它热能动力设备试验工作中的实际应用。
This paper applies the three-dimensional finite element method to the analysis of the stress for steam expanding vessel with tangential pipe, and the stress distribution has been obtained.
采用三维有限元方法对蒸汽扩容器与切向接管联接的关键部位进行了应力分析，获得了该部位的应力分布。
This paper applies the three-dimensional finite element method to the analysis of the stress for steam expanding vessel with tangential pipe, and the stress distribution has been obtained.
采用三维有限元方法对蒸汽扩容器与切向接管联接的关键部位进行了应力分析，获得了该部位的应力分布。
应用推荐