A second trash can will be for plastics that can be recycled.
第二个垃圾桶是用来放可以被回收和再利用的塑料制品的。
The micro-algae thrive on carbon dioxide, producing food for livestock as well as biofuels and material for plastics.
藻类靠吸收二氧化碳来生长,而且可以被当作家畜饲料、生物燃料和制造塑料的原材料。
The factors affecting the dimensional accuracy of plastics products are very complex. The dimensional tolerance characteristics which are suitable for metal products are not for plastics products.
对于塑料制品,影响其尺寸精度的因素很复杂,不能简单套用金属制品的公差规律。
Chemigum and Sunigum: elastomeric modifiers for plastics.
用于塑料的弹性体改性剂。
The quality requirements of mould steel for plastics are described briefly.
简述塑料模具钢的性能要求。
Mechanical blending is an important means in use for plastics modification.
机械共混是塑料改性的重要手段之一。
Must have good knowledge of manufacturing processes and materials for plastics production.
了解塑料生产的过程和材料。
The al series vacuum autoloader is an auxiliary machine essential for plastics processing.
AL系列真空式自动填料机系塑料加工所必须的配套辅机。
Yellow powder. The main purposes: for plastics, rubber, paints, inks and other industrial coloring.
黄色粉末。主要用途:用于塑料、橡胶、油漆、油墨等工业着色。
The properties of talc and the quality requirements of that for plastics industry are introduced in this paper.
本文简要描述了滑石的特征以及塑料工业对滑石的质量要求,论述了滑石对塑料制品性能的影响。
Theoretical basis for plastics mold design and plastics mold CAD and CAE technology were provided in this paper.
为塑料模设计和塑料模CAD及CAE技术提供了理论依据。
Because it is difficult for plastics to decompose in nature, People pay attention to substitute plastics with paper.
由于塑料在自然界中的难降解,“以纸代塑”引起人们的关注。
The application of intelligent decision support system (IDSS) in material selection of moulds for plastics was discussed.
探讨了智能决策支持系统(IDSS)在塑料模具选材中的应用。
With these spectral methods, the chemical composition and the structure of the polishing paste for plastics were identified.
通过上述光谱法确定了该塑料抛光膏的化学组成和结构。
The invention detailed herein comprises a family of radiation-curable coating formulations specifically for plastics substrates.
本文详细描述的发明含有特别用于塑料基底的辐射固化涂料配制品族。
Spiral mandrel blown-film die is advanced and widely used in film blowing which is one of the most popular processing for plastics film.
薄膜挤出吹塑是应用最广泛的塑料薄膜加工方法之一,而螺旋芯棒式机头则是应用最为广泛的、先进的吹膜机头。
Cryogenic grinding has been the development trend for ultrafine grinding of plastics, especially for plastics with low softening temperature.
低温粉碎是塑料,特别是低软化温度塑料超细粉碎的发展趋势。
It introduced the general situation, intension and developing trend of CAE for plastics extrusion dies from technology and application point of view.
从技术及应用的角度介绍了塑料型材挤出模cae技术的概况、内涵及发展趋势。
The differential of 190-200 degrees F is significant for plastics such as polyphthalamide that are intended for use in the components of an automotive powertrain.
的差异对于诸如PPA这样的塑料来说影响是很大的,PPA拟用于汽车动力系部件。
The characteristics, antistatic mechanisms, application method, interfering factors and effect evaluation of antistatic agents for plastics are briefly introduced.
简要介绍了塑料抗静电剂的特性、抗静电机理、使用方法、影响因素和效果评价。
Silica gel column chromatography and solvent extraction were used to separate grease and abradant in a kind of excellent polishing paste for plastics, respectively.
分别采用硅胶柱色谱法和溶剂抽提,分离优质塑料抛光膏中的油脂和磨料部分。
Therefore, Pengzhou has planned a floor space of 2.83 square kilometers (4250mu, excluding roads and greening) for plastics manufacturing and support industry Park.
为此,彭州市规划了占地面积2.83平方公里(4250亩,不含道路及绿化)的塑胶制造及配套产业园。
The situation and the distinguishing features of the various new organic pigments used for plastics and developed in recent years, were described in this review paper.
综述了近年开发的各种新型塑料用有机颜料的状况和特点。
It is beneficial to reduce production costs and improve product quality for plastics processing enterprises to take wet ground sericite as a new sort of reinforcing filler.
将湿磨绢云母粉作为一种新的增强填料应用在聚氯乙烯中,有利于塑料加工企业降低生产成本和提高产品质量。
Structural design and operational principle of molds for plastics piston pump housings are presented. The mold presents itself as a simple and rational piece of design work.
介绍了柱塞式液压泵塑料壳体注塑成型模具的结构设计和工作原理,该模具具有简单合理、动作可靠等特点。
The properties of carbon nanotubes and its applications in the fine chemical field such as catalyst and additives for plastics, rubber, ceramics and coatings are mainly introduced.
综述了碳纳米管的性质及其在催化剂、塑料、橡胶、陶瓷、涂料、表面活性剂等领域中的应用研究情况。
In addition, lactic acid can be polymerized to form the biodegradable and recyclable polyester polylactic acid, which is considered a potential substitute for plastics manufactured from petroleum.
并且由乳酸还可合成生物可降解性塑料,成为石油化工生产通用塑料的替代品。
For plastics processors, as long as a certain volume of injection molding, hot runner is very economical to use.
对于塑料加工商来说,只要有一定批量的注塑生产,使用热流道是相当经济的。
For plastics processors, as long as a certain volume of injection molding, hot runner is very economical to use.
对于塑料加工商来说,只要有一定批量的注塑生产,使用热流道是相当经济的。
应用推荐