The second part carries on the air fluid simulation analysis of variable intake manifold with the STAR-CD fluid software.
第二部分用STAR - CD流体软件对可变式进气歧管进行空气流动数值模拟分析。
Numerical 3d simulation and research on inner nozzle and outlet flow field of solid rocket motor of long range missile designed by Russia using STAR-CD computational fluid software.
采用STAR - CD计算流体软件对某俄式发动机的喷管内流场及喷管出口处流场进行了三维的数值仿真与研究。
The trouble is that the software that is used to do this generally treats people like particles in a fluid, says Mr Wittasek.
「麻烦在于，以前用来做这些的软体通常会把人群当作流体中的分子群。」 维达瑟先生说。
Fault tree expert system (FTES) is GUI software based on the local database, which is developed to aid the FT-building work of fluid systems in NPP.
故障树辅助建树专家系统(FTES)是基于本地机数据库的图形界面软件，其目标是辅助建造核电站流体系统故障树模型。
In this paper a reliable commercial CFD software FLUENT is introduced to simulate the viscous fluid field around the trimaran sailing in shallow waters.
本论文就是利用较成熟的商业软件FLUENT对处浅水域情况下的三体船周围的粘性流场进行数值模拟。
The method for prediction the meter factor of the turbine flow meter by the computational fluid dynamics (CFD) software package (FLUENT) is put forward.
提出了利用计算流体力学(CFD)软件(FLUENT)进行涡轮流量传感器仪表系数预测的方法。
This paper describes the Computational Fluid Dynamics (CFD) and CFX software, as well as discusser it's special modules, mathematical models and successful application areas.
本文介绍了计算流体力学(CFD)以及CFX应用软件的特有模块、包含的数学模型和成功应用领域。
It is very important to couple geomechanics and fluid flow with 3d simulation software.
利用3维模拟软件把地质力学和液流结合起来则非常重要。
In this paper, ion-exchange membrane used for EDI is studied, and flow field distribution modeling of dilute chamber with computational fluid dynamics (CFD) software is studied for the first time.
本文主要对EDI设备中的离子交换膜进行研究，并首次采用计算流体力学(CFD)软件对淡水室隔板的流场分布进行模拟。
For reservoir of Newtonian fluid, nowadays there has been being quite sophisticated well test theory and software.
对于牛顿流体油藏，目前已有比较成熟的试井理论和解释软件。
At the same time, use FLUENT computational fluid dynamics simulation software to optimize the structure of MAP reactor.
同时运用FLUENT计算流体力学模拟软件，模拟并优化了MAP反应器的结构。
The numerical analysis was performed on temperature distribution of the outlet nozzles in main vessel of SCWR(supercritical water reactor) by using computational fluid dynamics software CFX.
采用计算流体力学软件CFX对超临界水冷堆主容器出口管的温度分布进行数值分析。
The graphical modeling software can be used for model establishment for compressible or non-compressible fluid network in simulation system of thermal power-generation units.
图形建模软件可用于火力发电机组仿真系统中可压缩及不可压缩流体网络的建模。
Numerical simulation of the flow field of the standard fuel assembly in China Advanced Research Reactor is carried out by using computational fluid dynamics software CFX4.4 and CFX5.5.
采用计算流体力学软件CFX4.4和CFX5.5对中国先进研究堆标准燃料组件流场进行了数值模拟。
The paper then shows hardware and software block diagrams of the automatic fluid filling system with related merits and requirements which are the basis for the practical design.
进而设计出一个液浮惯性仪表真空充液工艺流程自动化系统的硬件和软件组成框图及有关指标和要求，为实际研制提供了有益的依据。
Educational software for fluid friction measurements is available.
可配合使用流体摩擦力测量的教学软件。
Then, the radiation efficiency at low frequency and frequency response at high frequency in fluid are computed respectively by both SYSNOISE software and AUTOSEA software.
然后结合SYS-NOISE软件和AUTOSEA软件分别计算壳体在流场中声辐射效率在低频段和高频段时的频率响应。
First, this paper shows that grid generation software has important significance for the research and application of computational fluid dynamics.
首先，本文说明了研制网格生成软件对于促进计算流体力学研究和应用的重要意义。
The software of CFX is fit to research on the fluid dynamics performance and pressure loss efficiently for muffler, and to analyze dynamics performance and predicting pressure loss of muffler.
说明CF X软件研究消声器流体动力性能和压力损失准确、有效，可用于消声器的流体动力性能分析和压力损失预测。
In this paper, with the current demand for electronic chip cooling, using fluid dynamics finite element analysis software FLO EFD.
本文结合目前电子芯片的散热需求，使用流体力学有限元分析软件FLOEFD。
This paper studies a new method that determines fluid transit time by automatically tracking the peak value of the software correlation device used for measuring two-phase flow.
本文探讨一种以单片机为核心的两相流测量用软件相关仪中自动跟踪峰值，以确定流体渡越时间的新方法。
CFD software FLUENT is used to analyze the fluid field and FE software ANSYS to analyze the riser dynamic response.
在计算过程中，分别采用流体分析软件FLUENT分析流场和有限元分析软件ANSYS计算立管的动力响应。
The fluid flow in a wide slab continuous caster mold was simulated by a three-dimensional model set up using the commercial software PHOENICS.
以某钢厂宽板坯连铸结晶器为研究对象，利用商业软件PHOENI CS建立一个三维有限差分模型，模拟宽板坯连铸结晶器内钢液的流动分布。
This paper USES the UG software, establishes axial flow pump's impeller model and fluid model, transfer the model data into the ADINA software.
本文采用UG建模软件，建立轴流泵的叶轮实体模型和流体域模型，通过ADINA软件接口将模型数据导入ADINA软件。
Used the CFX software, a vehicle muffler flow field was analyzed, and fluid dynamics performance was evaluated.
运用CFX软件分析了某车用消声器内部流场，评价了其空气动力性能。
The computational fluid dynamics software FLUENT is used to simulate the 3-d two-phase (gas-solid) flow of cyclone separator.
应用计算流体力学软件FLUENT对旋风分离器进行三维气固两相流场的数值模拟。
Based on the platform of numerical simulation software, the aerodynamic and the fluid field around the high-speed train under side winds are numerically simulated.
本文借助大型流体计算软件，对侧风作用下高速列车的气动特性和外部流场进行了数值分析研究。
Based on the platform of numerical simulation software, the aerodynamic and the fluid field around the high-speed train under side winds are numerically simulated.
本文借助大型流体计算软件，对侧风作用下高速列车的气动特性和外部流场进行了数值分析研究。
应用推荐