Firmware design process and reliability considerations. Skilled in documentation.
具有嵌入式软件可靠性设计和流程概念。具有文档编写能力。
This study included the production of hardware, firmware design and mainframe systems software design.
本研究包括硬件制作、固件程序设计和主机系统软件的设计。
The feature of USB, firmware design of USB device, driver design and application design are emphatically described.
着重论述了通用串行总线(usb)的特点，以及USB设备的固件程序设计、驱动程序开发和上层应用程序的开发。
And in the firmware design part, the design of EEG data acquisition firmware, USB communication firmware and USB HDD firmware are carried out.
在固件设计部分完成了基于USB固件框架的脑电信号采集固件设计、USB传输固件设计及usb硬盘固件设计。
Execute test plan seriously according to the operation instructions from Firmware Design Engineer, and carefully record all data with right format.
严格的按照软件工程师拟定的操作指导书执行测试计划，认真和规范的记录实验数据。
The system is composed of hardware design of chip microprocessor, firmware design of chip microprocessor, device driver and application software design.
系统设计包括硬件设计、单片机固件设计以及设备驱动程序和用户应用程序设计。
MCU firmware design focuses on the structure and the realization of firmware, HID class devices developing, report descriptors establishment and ADS7843 sampling program design.
单片机的固件程序设计部分主要介绍了固件的结构以及实现，HID类设备的开发及报告描述符的建立和ADS7843的采样程序设计。
As well as meeting the original design objectives, it has proven itself a great platform for many forms of firmware.
除了达成最初的设计目标，它同样可以作为其它各种形式的固件的很好的平台。
This part in this multipart series covers hardware configuration, including understanding architecture, planning logical network design, setting up terminal servers, and updating firmware.
本文是共分多部分的系列教程的第一部分，介绍了硬件配置，包括理解架构、规划逻辑网络设计、设置终端服务器以及更新固件等内容。
Firmware program design mainly shows the step of development and flowchart with corresponding code segment.
固件程序设计主要说明开发的步骤和流程图，并辅以相应的代码段。
This paper introduces the design of the hardware and the firmware of a boot card based on PCI bus.
本文介绍了一种基于PCI总线启动卡的硬件组成和固件的设计方法。
The design of software includes firmware, equipment configuration, BULK ONLY protocol and FAT file system.
其软件包括固件、设备配置、BULK_ONLY、FAT文件系统等程序的设计。
A design scheme of radar interface based on USB technology is presented. Techniques of hardware circuit design, firmware programming and application software design are illustrated.
提出一种基于usb的雷达接口电路设计方案，给出硬件电路设计、固件编程、应用软件设计等关键技术的解决方法。
Then, emphasize the development and design of USB device, among them include primarily; The design of USB hardware, the development of the firmware, the development of USB device driver.
然后，着重介绍了USB设备的设计和开发，其中主要包括：USB硬件设计，固件程序的开发，USB设备驱动程序的开发。
The design of the software includes three parts as following: the network communication between PC and controller, NAT9914 firmware and DLL (dynamic link library) program.
软件部分的设计共包括三大部分：PC机与控制器间的网络通信机制，NAT9914固件程序以及动态链接库程序。
The design of architecture of firmware, GUI, data structure, communication protocol, and program of the instrument of line patrol are presented in the thesis.
对嵌入式巡线仪中固件体系结构、GUI、数据结构、通信协议、程序进行了设计与实现。
And it introduces the theory of the design, selects specific chip, introduces the hardware of the channel, and brings forward the method of designing USB firmware, driver, and application.
介绍了该设计的原理，并选择了具体的元器件型号，给出了该通道的硬件结构图。并进一步给出了USB固件程序、驱动程序以及上层应用程序的设计方法。
The design of Lower Computer includes the hardware circuit and microcontroller firmware programming.
下位机平台的设计主要包括硬件电路的设计和单片机的固件编程。
Finally, we analyse and design the software of digital motion control systems based on USB, including the firmware of USB device, the drivers of USB device.
最后设计开发了采用USB技术的数字运动控制系统的软件，包括USB设备固件程序、U SB设备驱动程序。
There were analog multiplexers, A/D conversion(analog digital conversion), FIFO module, CPLD module in the hardware design and CPLD program, USB firmware, USB driver in the software design.
在硬件上包含多路开关、模数转换、FIFO模块、CPLD模块、USB模块； 在软件上包含CPLD编程、USB固件、USB驱动以及应用程序。
In this paper, the hardware circuit design of USB interface based on PDIUSBD12 chip is introduced, meanwhile implement of USB firmware program...
文中介绍了基于PDIU S - BD 12芯片的USB接口的硬件电路设计，并介绍了USB固件编程的实现。
Electrical connection, data processing, firmware program design are also explained in detail. And design of USB drive and application in PC are simply illustrated.
介绍了U SB硬件电气连接、数据处理，以及固件程序设计方法，并对PC机应用程序设计和固件驱动做了简要说明。
The hardware design using AT89S51 micro-controller and PDIUSBD12 and TLC2543 chips to achieve USB data transfer is carried out. And the firmware program design is introduced in detail too.
介绍了AT 89s51和PDIUSBD12固件的特点，以及采用AT 89s51单片机结合PD IUSBD12和TLC2543芯片实现USB数据传输的硬件设计，对固件编程的具体实现给出了详细说明。
The firmware of repeater is designed in modular design method. The key technology of CAN module initialization and dual FIFO transforming are discussed in detail.
介绍了中继器固件的模块化设计方法，以及CAN模块初始化、双fifo转发等软件模块的具体实现。
Offered candidate will research and design sensor embedded firmware and test software.
候选者将负责研发传感器的嵌入式固件和测试软件的编写。
The article provides a W5100-based hardware design scheme and an implement of the system firmware.
方案中给出了基于以太网芯片W5100白勺通讯卡硬件设计方案和软件设计实现。
The article provides a W5100-based hardware design scheme and an implement of the system firmware.
方案中给出了基于以太网芯片W5100白勺通讯卡硬件设计方案和软件设计实现。
应用推荐