This paper applies the theory of finite strain to the study of Paleozoic structures in Chengdao region.
该文将有限变形理论应用到埕岛地区古生界构造变形研究中。
The features of rock finite strain in the superimposed fold area under buckling are comprehensive results of multiphase deformation.
纵弯叠加褶皱地区岩石有限应变特征是所受历次变形的综合结果。
A precise time step integration method was proposed to solve the finite strain osmotic consolidation equation with varied coefficients.
提出精细积分半解析法求解变系数的以超孔压和孔隙比为控制变量的渗压固结微分方程。
Limit strain is able to be calculated by the combination of the fractionized displacement transfer (FDT) algorithm and the finite strain theory.
将分段位移传递法和有限应变理论相结合，可计算大变形下的极限应变。
A numerical model to simulate isotropic, coupled creep elastoplastic damage constitutive behavior at finite strain is proposed in the present work.
本文提出了一个模拟有限应变下各向同性蠕变-弹塑性-损伤耦合本构行为的数值模型。
The finite strain analysis in the study of palaeogeography is a new problem to which little attention has been paid but which should not be ignored.
岩相古地理研究中的有限变形分析，是一个尚未引起重视但又不可忽视的重要课题。
This study is focused on the influence of the transverse finite strain on the response of the structure subjected to different vortex-shedding loads.
位于海洋环境的张力腿平台受到的载荷是相当复杂的，本文着重考虑在涡旋脱落载荷作用下，横向有限应变对结构振动响应的影响。
In the planar motion, the influence of the transverse finite strain on the response of the structure subjected to different vortex-shedding loads is analyzed.
在平面结构模型中，比较了横向有限应变在不同涡旋脱落载荷的作用下对结构响应的影响。
For the old metamorphic area and the shear belt developed in the abyssal rocks which lack standard strain marks, this method is effective in the study of finite strain.
该法对缺少标准应变标志体的古老变质岩区的有限应变研究，以及发育在深成岩中的剪切带的有限应变研究，都是一种有效的工具。
The results show that the matrix formulation of governing equations of finite strain consolidation with Eulerian description has a more simple form than those with both t.
结果表明，欧拉描述的有限应变固结控制方程的矩阵形式要比t。
The palaeogeography and the initial stratal thickness of the Middle Cambrian in the Western Hills of Beijing are restored through the finite strain analysis in this paper.
本文从有限变形分析入手，着重恢复北京西山中寒武世古地理原态及相应的地层初始厚度。
Regional strain distribution pictures, strain patterns, may be determined by systematically measuring the finite strains in rock at the various spots in the relevant regions.
对一定区域内不同部位的岩石有限应变进行系统的测量就可以得到这个区域内的应变分布图象—应变型式。
By incorporating the theory of finite strain, the model is capable of evaluating the mean volumetric strain analytically, thus facilitating the procedure of numerical calculation.
运用有限应变理论，可以将球孔扩张塑性区内的平均体积应变以解析方法导出，方便了数值化计算。
In numerical computation by the finite element method it is also convenient to use the loading-unloading criteria and the constitutive equations formulated in strain space.
在有限元方法的数值计算中使用应变空间表述的加-卸载准则和本构方程也是很方便的。
In this master thesis, the stress-strain relationships of thin films were measured by nanoindentation combined with dimensional analysis and finite element method.
本文以纳米压痕法结合量纲分析及有限元方法来测量薄膜材料的应力-应变关系。
Under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ANSYS.
建立了负重轮的三种三维有限元力学模型，在考虑三重非线性的情况下，用ANSYS有限元分析软件计算了负重轮的应力应变分布。
In this finite model, the nonlinear stress - strain relationship of soil, the soil - nail interaction and the staged construction are all taken into consideration.
在分析中，考虑土的非线性应力-应变关系、土钉与土体的相互作用，以及分步施工过程。
This paper describes a method based on the generalized principle of virtual work to derive the hybrid model of finite element. An assumed-strain hybrid model was obtained.
本文提出用广义虚功原理的方法建立有限元的杂交模型，并具体导出了一种杂交应变模型。
Shear strength and shear strain are the basic properties in mechanics of concrete. They also serve as important data for finite element and failure criterion research on concrete.
抗剪强度和剪切变形是砼的基本力学性能，又是强度理论研究和有限元分析的重要数据。
The pile-soil interaction behavior of passive pile under soft soil movement action was analyzed using plain strain finite element analysis including the plasticity and large strain of soil.
采用平面应变有限元方法，对土体运动作用下的被动桩桩土相互作用进行分析。
The paper presents a systematical review on the recent studies for the problem of decomposition of strain and strain rate in finite elastoplastic deformation theory.
本文对有限弹塑性变形中关于应变及应变率的分解问题进行了系统的评述。
This paper gives a brief introduction of how TCA solves creep problems by using finite element method and initial-strain method, TCA's features and structure, and some application examples.
本文简要地介绍了TCA软件应用有限单元法解决弹性徐变体计算的初应变法和软件的基本特点与结构，并给出了应用实例。
The strain mode is acquired by analysing the finite element model of the intact and damaged structure.
通过完好结构和有损伤结构的有限元分析。
This paper presents a finite element model of local damage in creep and provides the threshold strain for damage elements.
建立了蠕变局部损伤法模型，并给出单元进入损伤态的判据和失效的临界拉伸应变条件。
While deriving the finite element equation, get the cable's strain formula considering the big distortion, get its geometry rigidity matrix and elastic rigidity matrix.
在有限元法推导方程的过程中，考虑到拉索大变形的应变表达式，求得它的几何刚度矩阵和弹性刚度矩阵。
In this thesis, the stress intensity factors of top-down cracks caused by loading are calculated using three dimensional finite element model and compared to the results of plane strain model.
本文采用三维有限元模型分析了荷载作用下自上而下裂缝尖端的应力强度因子，并与二维平面应变模型分析的结果进行比较。
The relations between temperature, stress, strain and displacement on ductile shear zone are established by using theory of rheology and finite element method.
本文应用流变学有限元法，建立了韧性剪切带内的温度、应力、应变和位移之间的关系。
In theoretical investigations, elastic strain energy method, fiber inclination model, three cells model and finite element model etc. are introduced.
在理论研究方面，介绍了弹性应变能法、纤维倾斜模型、三细胞模型和有限元模型等工作。
The crack tip stress-strain field of elastic-plastic materials are analysed by finite element method in the plane stress condition.
用有限元方法对平面应力条件下弹塑性材料的裂纹尖端应力应变场进行了计算。
The effect of the whisker rotation on the hot compressive deformation behavior of the whisker reinforced aluminum matrix composite is investigated by the plane strain finite element method.
采用平面应变有限元方法研究了晶须转动对晶须增强铝基复合材料热压缩变形行为的影响。
应用推荐