Cloud picture is one of the important tools for visualizing the analyzed data in finite element method.
彩色云图是有限元软件后处理可视化的主要手段之一。
The finite element method is applicable to complex structure, so it has great application value in engineering.
有限元法是一种适合于各种复杂结构的分析方法，值得在工程上推广。
A theoretical study on ultrasonic guide waves generated by a pulsed laser was presented, using the finite element method (FEM).
利用有限元法(FEM)对板状金属材料中脉冲激光激发的超声导波进行了理论研究。
A numerical model, based on the finite element method, is established to describe a fluid flow in a deforming saturated oil reservoir.
利用有限元方法，建立了一个描述可变形饱和储层中流体流动的数值模型。
It compares the rigid limit equilibrium method with the finite element method.
比较了有限元法和刚体极限平衡法的优缺点。
The finite element method was used for analysis of heat stress in chip on board(COB).
本文采用有限元法分析了板上芯片（COB）的热应力分布。
The finite element method was used for analysis of heat stress in chip on board (COB).
本文采用有限元法分析了板上芯片(COB)的热应力分布。
By using finite element method, the deformations of flat membrane mirror have been calculated.
运用有限元法对不同工况下平面薄膜反射镜的变形进行了计算。
Slice method and finite element method are principal methods of soil slope stability analysis.
条分法和有限元法是土质边坡稳定分析的主要方法。
The geometric nonlinear finite element method is used to analyze the impact mechanism of dynamic compaction.
采用大变形几何非线性有限元法分析强夯加固机理及其振动对环境影响。
Self adaptive finite element method has its important application value in the analysis of practical engineering problems.
自适应有限元方法在实际工程问题的分析中有重要的应用价值。
Based on finite element method (FEM), the vibration of power transformer windings caused by electrodynamic force is analyzed.
利用有限元算法分析了三相电力变压器绕组各线匝在不同运行模式下电动力引起振动。
In this paper, the theoretical model of cross-flow of grain cleaning fan on farm is proposed by using the finite element method.
本文应用有限元方法，建立了横流式农用清选风机内部的气体流动数值模拟模型。
The extended finite element method (XFEM) is a numerical method for modeling discontinuities within a standard finite element framework.
扩展有限元法是近年来出现的一种在常规有限元框架内求解不连续问题的数值方法。
The structural dynamic response of a certain multi? cylinder internal combustion engine block is analyzed applying finite element method.
应用有限元方法对某多缸内燃机机体在活塞推力作用下的结构动力响应进行了分析。
The response of dual laterolog in tilted anisotropic sedimentary formation was simulated with the three-dimensional finite element method.
利用三维有限元法，模拟了电性各向异性倾斜沉积岩层的双侧向测井响应。
The analyzed result coincides with the experimental result, so the finite element method can be used for the optimal design of rubber damp.
分析结果与试验结果能很好的吻合，因此有限元方法可以用来指导橡胶缓冲器的优化设计。
Essentially, the finite element method is a numerical technique for the variational problems, which is a general approach to physical problems.
有限元法实质上是变分问题的一种数值解法，是物理问题的通用计算方法。
The energy principle is an important approach for solving the problems of elastic-plastic mechanics as well as the basis of finite element method.
能量原理是解决弹塑性力学问题的一个重要途径，它是有限元法的基础。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
Local artificial boundary of seismic analysis is widely used in time-domain finite element method for its good feasibility and high numerical stability.
地震分析中的局部人工边界由于具有易于实现、稳定性较好的特点，目前在时域有限元法中得到广泛应用。
Because of its adaptation to shape and high precision, the finite element method has a more and more important role in the analysis of optical waveguides.
作为一种重要的数值分析方法，有限元法凭借其对光波导任意形状的适应性、高的计算精度等特点，将在光波导分析中起到越来越重要的作用。
Dynamic bearing reactions are calculated based on a dynamic alignment model of marine shafting by combining finite element method with digital calculations.
利用有限元建模与数值计算相结合的方法，进行了船舶轴系的动态校中计算。
A mathematical model for determining the thermal influence zone of buried hot oil pipeline was developed and solved numerically by the finite element method.
建立了埋地热油管道热力影响区的数学模型，并用有限元法进行了求解。
After a cell is broken, the stress adjustments of the other cells in the system are obtained by finite element method using the broken cell as inner boundary.
当单元破裂后，将破裂单元作为内部边界，利用有限元方法计算由于这个单元破裂对系统其他单元造成的应力调整。
After a cell is broken, the stress adjustments of the other cells in the system are obtained by finite element method using the broken cell as inner boundary.
当单元破裂后，将破裂单元作为内部边界，利用有限元方法计算由于这个单元破裂对系统其他单元造成的应力调整。
应用推荐