Objective: To prepare gatifloxacin film agent.
前言：目的：研制加替沙星涂膜剂。
Objective: To prepare levofloxacin hydrochloride film agent.
目的：研制盐酸左氧氟沙星膜剂。
Ble to button up spot lifter, de-film agent, Manual painting lacquer, insecticide and relevant similar product.
能够扣住去油污剂、脱膜剂、手喷漆、杀虫剂和更多此类物品。
Method : The chitosan and glycerine were used as the supplementary materials to prepare gatifloxacin film agent.
方法：以壳聚糖、甘油为辅料，制备加替沙星涂膜剂，采用紫外分光光度法测定含量。
Conclusion: the prescriptive technique of the film agent was feasible, with stable quality, suitable for clinical application.
结论：该涂膜剂处方工艺可行，质量稳定，适于临床应用。
Method: the chitosan and glycerine were used as the supplementary materials to prepare gatifloxacin film agent. The content was measured by UV-spectrophotometry.
方法：以壳聚糖、甘油为辅料，制备加替沙星涂膜剂，采用紫外分光光度法测定含量。
With no U.S. distributor secured, its international sales agent Eastern Mordor will showcase "Skin" at the upcoming American Film Market.
因为没有固定的美国发行商，所以国际发行代理北京世纪佳映公司将在即将到来的“美国电影市场”（AFM）中展出这部电影。
Angelina Jolie has revealed her agent only said, “There’s this film in Venice…” and she was in.
安吉丽娜朱莉承认，当她的经纪人说“有个电影在威尼斯...” ，她马上就同意拍片了。
The action film features Keanu Reeves as an FBI agent who goes undercover to investigate a gang of surfing bank robbers.
该部动作片刻画了由基努·里维斯饰演的FBI探员一角，讲述了他做卧底来调查一伙爱好冲浪的银行劫匪的故事。
One day, an agent thought he was fit for the new film, so Pitt was chosen to play the role, then his career went well all the way.
有一天，一个经纪人觉得他适合演新的电影，因此皮特被选中饰演角色，此后他的生涯都一路顺风。
When the peel agent formed by the deposition of that layer of film or when it completely clean, together with the sebum will peel off.
当剥下敷而剂所形成的那层薄膜或将之完全冲洗干净时，皮脂会随着一起剥落。
Fumian agent applied in the face to a certain time, or can be washed with water to make the first film to dry and then peel.
敷面剂涂抹在脸部到了一定的时间之后，可以用水洗净或先使之晾干再将薄膜剥离。
The free toluene diisocyanate(TDI) in the curing agent TDI-TMP(Trimethylol Propane) of polyurethane was separated in laboratory by means of high-vacuum two-stage thin-film evaporation.
在采用高真空两级薄膜蒸发分离甲苯二异氰酸酯（TDI）-三羟甲基丙烷（TMP）聚氨酯固化剂中游离TDI的实验研究基础上，进行了中试研究。
The product is made with6020polyester thin film coated with bonding agent and compounded with insulation paper.
该产品是有6020聚酯薄膜涂以粘合剂再与绝缘纸复合而成。
In contrast to the jet technology the inks do not penetrate the structure paper, but they are brought to its surface and are covered with special fixing agent for shaping of thin film.
在对比射流技术油墨不渗透结构的文件，但他们提请其表面覆盖着，特别固色剂为形成薄膜。
Protective band, processing layer forming agent, optical film and image visual display device.
保护带，处理层形成剂，光学膜和图像视觉显示器。
The copolymers are widely used as elastomer, film, foam, coating, hot-melt adhesive, water-based adhesive, textile sizing agent, fabric coat and so on.
醋酸乙烯酯共聚物用途广泛，可用炸弹性体、薄膜、泡沫、涂料、热熔胶、水性粘合剂、纺织上浆剂、织物涂层等。
The adhesion between asphalt added this anti-stripping agent and aggregates did not decrease after film heating. However, it remained at the level of grade 5 or 5-.
经薄膜加热处理后，掺加该抗剥落剂的沥青与集料之间的粘附性没有降低，仍可达到5级或5级。
This film ACTS as a protective sealing agent in the vital area.
这一层膜对重要区域形成保护密封。
The preparation of a new kind of water-based hydrophobic agent and the mechanism of forming super hydrophobic film on pretreated metal surface are studied.
探讨了一种新型水基憎水剂的制备和成膜工艺，并分析了预处理金属表面超憎水膜的形成机理。
The relationship between the surface's unit resistance of the film with contents of silver plated copper powder and its particle size, and the contents of coupling agent were studied.
分别研究了漆膜表面单位电阻与镀银铜粉的含量及其粒径以及钛酸酯偶联剂的含量之间的关系。
Influencing of curing time on film hardness is discussed through modifying the ratio of paint and curing agent. The defects from spraying process and the countermeasures are narrated.
通过调整漆与固化剂比例，讨论了固化时间对漆膜硬度的影响，同时论述了喷涂过程中产生的缺陷和采取的措施。
Modifying potato starch with etherification, adding water, PVA, glycerol and other assisting agent to the modificated starch to prepare all-starch thermoplastic thin film was studied.
对马铃薯淀粉进行醚化改性，在改性后的淀粉中加入水、PVA、甘油等助剂，制备全淀粉热塑性塑料薄膜。
The product is two layers of limpness composite material of polyester thin film coated with bonding agent and single surface bonding of calendaring aromatic polyamide fiber paper.
该产品是由聚酯薄膜涂以胶粘剂，单面粘合轧光聚芳酰胺纤维纸而成的二层柔软复合材料。
The protective agent includes a number of hydrophilic organic silicon and film-forming protective agent.
这些防护剂主要包括一些亲水性的有机硅和成膜型防护剂。
The results of SEM and FT-IR suggest that good adhesion in the interfaces of composites is observed and mechanical properties are improved by adding special film-forming agent into immersion agent .
经SEM和FT-IR的研究结果表明：在浸润剂中添加了成膜剂后，复合材料的界面可以达到良好的结合状态，材料的力学性能也有明显提高。
After washing, give the film a final rinse in water containing an ILFORD ILFOTOL Wetting Agent (1 + 200). The film should then be hung to dry.
水洗后，胶片放在水中，再进行一次最后的漂洗，水中包含依尔福ilfotol润湿剂(1 + 200)。然后将胶片挂起干燥。
This paper introduced a new copper treatment agent ST-10+ for improving the adhesion of dry film to printed circuit board copper substrate.
本文介绍了一种能提高干膜与线路板铜基粘合力的新型铜面处理剂ST-10+。
This paper introduced a new copper treatment agent ST-10+ for improving the adhesion of dry film to printed circuit board copper substrate.
本文介绍了一种能提高干膜与线路板铜基粘合力的新型铜面处理剂ST-10+。
应用推荐