It is very important to prevent fatigue failure, optimize wheel design and secure the safety of rolling stock.
这对预防车轮疲劳失效、优化车轮设计,保障行车安全,具有重要意义。
Also it reduces suck rod fatigue failure to prolong working life.
这样可以降低抽油杆的疲劳损坏,延长抽油杆的使用寿命。
Low cycle multiaxial fatigue failure is the main failure mode of aeroengine compressor disk.
低循环多轴疲劳失效是航空发动机低压压气机轮盘的主要失效形式。
In the event failures of boring tools, the fatigue failure of the drill collar is especially prominent.
在钻具失效事故中,钻铤的疲劳失效尤为突出。
The main reason of inclined pipe fracture was low frequency stress fatigue failure at temperature field.
斜管开裂的主要原因是温度场下的低频应力疲劳破坏。
Alternating stress produced by alternating dynamic ice force evidently results in the partial fatigue failure.
交变冰力引起的结构交变应力必将导致结构的局部疲劳损伤。
Aimed at the fatigue failure of electric bike shock absorber, a probabilistic estimation method is put forward.
针对电动车后避震的疲劳失效损坏,提出疲劳损坏概率估计。
The fatigue failure types of the beams were fracture failure, bending tensile failure and shear compression failure.
这批试件的疲劳破坏形式为:折断破坏、弯拉破坏和剪压破坏。
The synthesis of thermal, centrifugal and aerodynamic stresses may cause the low cycle fatigue failure of the blades.
这种热应力与离心应力、气动应力合成的综合应力可能引起涡轮叶片的低循环疲劳失效。
The dynamic effects due to vibration should be taken into account by the designer if fatigue failure is to be avoided.
为了避免弹簧的疲劳破坏,设计者应对弹簧由振动所引起的动力影响加以考虑。
Thermal fatigue. A type of fatigue failure wherein the cyclic stresses are introduced by fluctuating thermal stresses.
一种疲劳失效类型,循环应力是由于交变热应力引起的。
According to the fatigue failure character of riveted members, a simplified fracture mechanics model (SFMM) was developed.
根据铆接构件的疲劳破坏特征,建立了铆接钢桥简化断裂分析模型。
Fatigue life (Nf). The total number of stress cycles that will cause a fatigue failure at some specified stress amplitude.
疲劳寿命(Nf):在某一指定应力幅值下,引起疲劳失效的应力循环总数。
Under the condition of our experiments, the main forms of contact fatigue failure are deep-spalling and shallow - spalling.
在本试验条件下,接触疲劳失效的主要形式为深层剥落和浅层剥落。
Through analysis many times, the main reason is fatigue failure that is caused by stress concentration and surface quality.
经多次分析,确定主要原因是应力集中和表面质量差引起的疲劳失效。
Slight misalignment of the internal shaft is suspected to cause side loading and lead to premature fatigue failure at low hours.
发动机内部轴线的轻微安装偏差被怀疑是导致负载不均衡,并导致在过低的使用小时数时产生疲劳故障。
The brake rims on drilling rig drawworks are subjected to heat load during string lowering and will end in thermal fatigue failure.
石油钻机绞车刹车鼓在下钻过程中,由于热负荷的作用会发生热疲劳破坏。
When the inclusion size in the spring steel is larger than the critical size of inclusions, the probability of fatigue failure will increase.
当弹簧钢中的夹杂物尺寸大于临界夹杂物尺寸时,容易造成疲劳强度失效。
The fatigue failure and mechanical properties of conventional, semi-efficient and efficient curing systems of NR/BR(70/30) blend were studied.
研究了NR/BR为70/30(质量比)时普通、半有效和有效3种硫化体系共混物的拉伸疲劳寿命和力学性能。
The threshold value of damage and maximum strain are adopted as failure criterion to reflect fatigue failure and ductile failure respectively.
针对材料不同的失效模式,分别采用损伤变量门槛值和最大应变作为失效判据。
Aimed at the different fatigue failure types of the beams, the failure causes are analyzed. A concept of critical reinforcement ratio is offered.
针对不同的疲劳破坏形式,分析了产生不同破坏形式的原因,提出了界限配筋率的概念。
Failure analysis of side rail box imitating chief beam of metallurgy crane was studied. Cause of fatigue failure and improving method were given.
介绍了冶金起重机金属结构偏轨箱形模拟主梁的疲劳失效分析研究结果,提出疲劳失效的原因及改进措施。
The thermal shock failure of ceramic coating is essentially the fatigue failure induced by cyclic thermal stress during repeated heating and cooling.
陶瓷涂层的热震失效是由于涂层在循环加热和冷却过程中,涂层内产生循环热应力,导致涂层发生热疲劳失效。
This paper studies the relationship between the static toughness and fatigue failure firstly, then getting the damage formula expressed by toughness.
本文研究了材料的静力韧性与疲劳损伤之间的关系,并在此基础上得到用韧性表示的损伤表达式。
The comparing result showed that the arc transition area between rod and head was easy to produce stress concentration which results in fatigue failure.
结果表明,该连杆螺栓杆部与头部的过渡圆弧处容易产生应力集中,造成其疲劳断裂。
Because of the large deformation of the soft base structure, the pavement would have fatigue failure under heavy load to make the road losing its function.
柔性基层结构由于基层结构变形大,在重载交通条件下,路面面层短期内在重复荷载作用下易产生疲劳破坏,导致路面结构层的功能丧失。
At present, in many cases, reliability analysis of structural systems of strength failure, stiffness failure and fatigue failure is respectively considered.
目前结构系统在静载作用下失效和疲劳载荷作用下失效以及刚度失效这几种情况下的可靠性大多是分别予以考虑的。
At present, in many cases, reliability analysis of structural systems of strength failure, stiffness failure and fatigue failure is respectively considered.
目前结构系统在静载作用下失效和疲劳载荷作用下失效以及刚度失效这几种情况下的可靠性大多是分别予以考虑的。
应用推荐