但失败分析是这样的。
The procedure of the failure analysis and some inspection methods were presented.
给出了失效分析的程序和若干检验方法。
Perform reliability testing and root cause and failure analysis of complex problems and systems using applicable statistical methods.
执行可靠性测试和根本原因和失效分析复杂问题和系统使用适用的统计方法。
The appropriateness of selection is still bearing failure analysis must be considered.
选材是否得当仍然是轴承失效分析必须考虑的因素。
This article focuses on the automotive power systems common failure analysis, diagnosis and the main content of the maintenance jobs.
本文着重探讨汽车电源系统的常见故障分析、诊断以及维修作业的主要内容。
This failure analysis was performed by using macro check, micrography and hardness measurement.
采用宏观分析、显微检验和硬度测定对压铸模进行了失效分析。
Lead the failure analysis for products failed in-house production, on customer side and in manufacturing process.
负责内部生产、客户端和制造工艺中的失效产品的故障分析。
Failure analysis is a main aspect of the validation test and it provides the fundamental ways for tracing the failure mechanisms and optimizing the validation test flow.
失效分析是验证测试的重要方面，它为探求芯片失效机理与优化验证测试流程奠定了基础。
On the basis of failure prevention, the working thought, procedure and dialectical methodology of failure analysis were discussed, and the future of failure analysis was viewed.
以防止失效为出发点，论述了失效分析的工作思路、程序和辩证方法； 展望了失效分析的未来。
Support production line to do process failure analysis and product diagnosis. Continuously optimize process and CPK etc.
帮助生产线分析工艺失效原因，提高良品率，改善过程能力。
Failure analysis is conducted for the single chip packaging process of an advanced high-range MEMS accelerometer with double cantilever beams.
对一种先进的双悬臂梁高量程MEMS加速度计的单芯片封装工艺进行了失效机理分析。
And the functions of real-time monitoring, long-range controlling, accident alarm, failure analysis, and so on can be carried out together with project case.
本文对变配电站智能监控系统的构成、特点、设计思路及内容进行了叙述，并结合工程实例再现其实时监控、远程控制、事故报警及故障分析等功能。
On-line Failure analysis, and improvement testing.
生产不良失效分析及改善测试。
Customer field failure analysis, and technique support.
客户现场失效分析，技术支持。
Failure analysis is made through investigation for an imported floating deck in aluminium alloy.
通过对一座进口铝浮盘损坏情况的调查，对铝浮盘进行了失效分析。
It also presents failure analysis of the product and reliability characteristic index.
对该产品进行了失效分析，给出了可靠性的特征指标。
This paper gives a comprehensive failure analysis on the thermal fatigue crack of engine exhaust manifold and makes an improvement for materials and structures.
对某车型发动机排气歧管的热疲劳断裂问题进行综合失效分析，并从材料、结构方面提出改进意见。
It is very important for improving drilling rate, reducing drilling cost and safety drilling to carry out drill stem failure analysis and prevention.
开展油田钻柱失效分析与预防对提高钻井速度、降低钻井成本及井下安全钻进具有重要意义。
Aimed at the wear problem of roll axle neck, failure analysis and rebuilding were made for multi-roller mill.
针对多辊筒碾压机压辊轴颈磨损严重的问题，对其进行了故障分析和改造。
This article mainly introduces applications of X - ray technology in the fields of hybrid integrated circuit failure analysis, DPA, and screening test.
本文主要介绍X射线透视技术在混合集成电路的失效分析、DPA以及筛选领域中的应用。
It has been proved that these cracks are caused by sulfide stress corrosion cracking (SSCC) through failure analysis and service environment survey.
通过失效分析和管道服役环境调查，证明开裂原因是管道服役期间发生硫化物应力腐蚀开裂(SSCC)。
The present methods can supply the failure analysis of bridge deck pavement layer in concrete highway Bridges with a new way of study.
本文为混凝土公路桥中桥面铺装层的破坏分析提供了一种新的研究途径和方法。
The leakage circuit breaker performance and protection types were introduced, examples of the phenomenon of leakage circuit breakers and the reasons for failure analysis.
简单介绍了漏电断路器的性能和保护种类，举例说明漏电断路器的常见故障现象及原因分析。
The system can provide effective guidance for enhancing exactness of bit failure analysis, improving bit design and evaluation, and selecting proper bit for exploration drilling.
该系统对提高钻头失效分析的准确性、提高钻头设计、评价、探井钻头选型的针对性具有很强的指导作用。
Raw material quality factor in the bearing failure analysis, the proportion has decreased significantly, but it is still bearing failure , one of the main factors.
原材料质量因素在轴承失效分析中所占的比重已经明显下降，但它仍然是轴承失效的主要影响因素之一。
The present paper describes the failure analysis of roller -coupling by testing the optical, metallographic and mechanical properties, offering you the fracture reasons.
本文介绍了利用光学金相、力学性能测试方法对轧辊联轴节进行了失效分析并提出了断裂原因。
The present paper describes the failure analysis of roller -coupling by testing the optical, metallographic and mechanical properties, offering you the fracture reasons.
本文介绍了利用光学金相、力学性能测试方法对轧辊联轴节进行了失效分析并提出了断裂原因。
应用推荐