The Virtual I/O Client (VIOC), bxaix85, was configured with a virtual ethernet interface configured with the appropriate VLAN ID to communicate with the outside world using the SEA in the VIOS.
VirtualI/O客户机（VIOC）bxaix85配置了一个具有适当VLANID 的虚拟以太网接口，从而通过 VIOS 中的SEA与外界通信。
The embedded network device resarched is a distributed I/O device which has an ethernet interface, it is applied mainly in industrial automatic control field to monitor heavy-duty equipments remotely.
涉及的嵌入式网络化装置是一个具有以太网接口的分布式输入输出装置，主要应用于工业自动化控制领域，对大型设备实施远程监控。
You will have to enable a second Ethernet interface and configure PF to your needs.
您需要启用第二个Ethernet接口，并根据需要配置PF。
For example, consider a laptop that includes a wireless 802.11 interface and an Ethernet interface.
例如，让我们来考虑一台包含一个无线802.11接口和一个以太网接口的笔记本的例子。
It monitors the health of a particular service (or services) through either a serial line or Ethernet interface or both.
它通过串行线、以太网接口或者同时使用二者来监测特定服务(或多个服务)的健康状况。
Nowadays, the Ethernet interface chip EOE1 has been validated by FPGA.
目前，所设计的以太网接口芯片EOE1己通过FPGA验证。
The second part explains the principle and realization of weighing device's Ethernet interface.
第二部分讲述电子衡器以太网接口的原理及其实现。
The current routers or the exchangers offer gigabit Ethernet interface including multiple ports.
当前的路由器或交换机产品都提供多端口千兆以太网接口。
Then, this article discusses how to use single chip and RTL8019AS to realize the Ethernet interface.
然后论述了用单片机和RTL8019AS实现以太网接口的方法。
The thesis is just about the design and implementation of Gigabit Ethernet Interface Card in Core Router.
本文的研究课题是核心路由器中的千兆以太网接口卡的设计和实现。
So far, almost all main providers of PLC and remote I/O devices can provide products with Ethernet interface.
目前几乎所有主要的PLC和远程I/O供应商都能提供支持以太网接口的产品。
Then introduces the system design principle and the Ethernet interface module's hardware realization method in details.
然后详细介绍了系统设计原则以及以太网接口模块的硬件实现方法。
This paper Introduces the application of embedded Ethernet interface technology in the Families Network Control Systems.
介绍了嵌入式以太网接口技术在家庭网络控制系统中的应用。
This section describes the relationship between the Ethernet Interface Node (EIN) and EINLINK status indicators and alarms.
这一节将描述以太网接口节点(EIN)与EINLINK状态指示器和告警之间的关系。
This paper introduces the design manner about Ethernet interface of electronic belt scale second instrument based on MCS-51.
介绍了基于51单片机的电子皮带秤二次仪表以太网接口的设计方法。
SYS driver to place the Ethernet Interface Card in promiscuous mode to capture all the packets that travel through the network.
SYS驱动设置以太网接口卡为混杂模式，用来捕获所有网络上的数据包。
So, it is of important scientific significance and practical value that an embedded inverter with Ethernet interface is developed.
因此，研制一个带以太网接口的嵌入式变频器具有重要的科学意义和应用价值。
The internal structure and principle of Ethernet controller are analyzed, and the Ethernet interface circuit is designed using this controller.
分析了以太网控制器的内部结构和工作原理，并用其设计了以太网接口电路。
The paper also implements 100m Ethernet Interface for the demodulator, which could conveniently transmit the data of demodulated to PC for monitor.
论文还实现了解调器的百兆以太网接口，使得系统可以方便地将解调数据发送给计算机进行后续处理。
Ethernet interface ent0 on the blade maps to the first switch on the blade chassis; each consecutive Ethernet interface maps to the next available switch.
刀片服务器上的以太网接口ent0映射到刀片服务器机架上的第一个交换机；每个以太网接口依次映射到下一个可用的交换机。
The main work of the author is the Ethernet interface hardware, software modules and related design and implementation of the T-MPLS experimental prototype.
作者主要负责T-MPLS实验节点设备中以太网接口相关的软硬件模块的设计和实现。
This paper introduces a method of hardware constitution and software design of embedded system containing Ethernet interface and adopting DSP as its core processor.
介绍了以DSP为核心具有以太网接口的嵌入式系统的硬件电路组成和软件设计方法。
This paper introduces the DM642 traffic information collection system from aspects of system core, memorizer, video interface, Ethernet interface, and audio interface, etc.
从系统核心、存储器、视频接口、以太网接口、音频接口等方面介绍了DM642交通信息采集系统。
This paper describes the implementation method and technology of Ethernet interface card based on USB BUS. A 10base-t Ethernet adapter based on USB1.1 protocol has been designed.
论述了基于USB总线的以太网接口卡的实现方法和技术，设计开发了符合USB1.1协议的10BASE - T以太网接口卡。
The medical image processing system, which centers on the least system of the PXA255 processor, is expanded by adding program memory, data memory, UART, USB and Ethernet interface.
医学影像处理系统以PXA255处理器的最小系统为核心，扩展了程序存储器、数据存储器、UART串口、USB和以太网接口。
CAN-BUS interface adopts protocol control chip SJA1000 plus receiving and sending chip 82c250. Ethernet interface adopts Ethernet controller RTL8019AS as physical transmission media.
CAN总线接口采用协议控制芯片SJA1000，配以收发器82c250。以太网接口采用以太网控制器rtl 8019as作为物理层传输媒介。
This paper introduces how to debug embedded software by Ethernet interface in the embedded debugger. The network communication between the host computer and the board has been implemented.
本文介绍了在嵌入式调试器中如何通过以太网口进行嵌入式软件调试，实现了主机与开发板之间的网口通信。
The article discusses the application of the embedded system used in the Ethernet interface equipment. It introduces a design theory and method of Embedded intelligent dual-Ethernet system.
讨论了嵌入式系统在网络接口设备中的应用，介绍了一种嵌入式智能双以太网系统的设计原理和方法。
Based on the introduction of industrial Ethernet technique, this paper describes a method of expanding an Ethernet interface using RTL8019AS Ethernet controller in the 80c196 single-chip system.
该文在对工业以太网技术阐述的基础上，具体介绍了在80c196单片机系统中，利用RTL8019AS以太网控制芯片，实现工业以太网接口的硬件电路设计及软件设计。
Based on the introduction of industrial Ethernet technique, this paper describes a method of expanding an Ethernet interface using RTL8019AS Ethernet controller in the 80c196 single-chip system.
该文在对工业以太网技术阐述的基础上，具体介绍了在80c196单片机系统中，利用RTL8019AS以太网控制芯片，实现工业以太网接口的硬件电路设计及软件设计。
应用推荐