High speed magnetic drive pump just fulfills the special requirements.
采用高速磁力泵可以满足这些特殊要求。
The magneto drive pump of stainless steel drives liquid medicine circulation;
不锈钢磁力驱动泵驱动药液循环；
An inner drive for a magnetic drive pump includes a magnet supported on a yoke.
一种用于磁驱动泵的内驱动器，包括支撑于轭上的磁体。
The constant-pressure and variable-flow adjustment of inverter-drive pump is widely used for energy saving, but the method has still additional hydraulic loss.
水泵变频调速恒压交流供水是目前应用最广泛的节能供水方式，其能耗较低，但仍存在额外的水力损耗；
The side-abrasion failure of rod string for polymer drive pump wells is analyzed by using computer simulation method. The extension of fuzzy reliability analysis is expanded to mechanical system.
将计算机数字仿真技术引入聚驱井管杆偏磨失效模糊可靠性分析中，把模糊可靠性的分析范围扩展至机械系统。
The system uses the engine to drive a hydraulic pump that charges an accumulator to high pressure.
这种系统利用该发动机来驱动液压泵以使蓄压器充满压力达到高压。
Pump and motor mounted on a common chassis, through the flexible coupling from the motor direct drive.
泵与电机安装在共同底盘上，通过弹性联轴器由电机直接驱动。
Reliability design of V-belt drive get not only a small size? Light wight but also high reliability in the circulating pump.
讨论了泵中V带传动的可靠性设计与传统设计比较，不仅根数少、尺寸小、质量轻，而且可靠性高。
The special inverter and pump for photovoltaic water pump is expensive and making using of general inverter to drive general water pump can not tracks point of maximal power.
目前光伏水泵的推广面临两个方面的障碍，一方面是应用较多的专用型光伏机泵成本较高；另一方面利用通用变频器驱动通用机泵时光伏利用率低。
Pump wear parts are mainly drive shaft and bushing, passive gear center hole and shaft pin, pump shell lumen and gear, gear face and pump cover, etc.
齿轮泵的磨损部位主要有主动轴与衬套、被动齿轮中心孔与轴销、泵壳内腔与齿轮、齿轮端面与泵盖等。
Two pump rotor spinning rod through the implementation drive.
两个泵转子通过旋转的抽油杆实现驱动。
The oil pump is driven by a chain drive on the crankshaft.
机油泵由曲轴上的链条驱动装置来驱动。
Pump drive shaft and bushing wear, the tolerance clearance increases, will affect oil pump.
齿轮泵主动轴与衬套磨损后，其配合间隙增大，必将影响泵油量。
The principle of forging hydraulic press by pump direct drive is introduced in this paper, the math model, control method and strategy are also described.
介绍泵直接传动的锻造液压机工作原理，对其控制机理、数学模型、控制策略进行了研究，并成功地应用于生产实践中。
Now the novel linear motor of bidirectional pulse variable-frequency control is applied to drive the flow control pump successfully.
目前，设计的双向脉冲变频控制的直线电机已成功应用于计量泵的驱动器中。
The pump has two types of drive, electromotion and belt drive. New products can be designed and provided according to customers' special requirements.
该泵有电动和皮带驱动两种形式。根据客户特殊要求可提供新的设计产品。
In addition, the camshaft has an eccentric to operate the fuel pump and a gear to drive the ignition distributor and oil pump.
此外，凸轮轴还带动一个驱动燃料泵的偏心轮和一个带动分电器和油泵的齿轮。
Ensure that the pump has adequate oil and that all drive components are tight.
确保泵油足够的油，并且所有驱动部件都紧固。
The host pumps and the auxiliary pump adopts the hydraulic and pneumatic united drive, the movement is nimble and reliable.
主泵、泵采用液气联合驱动及无触点电气控制系统，运行平稳，换向灵敏可靠。
Oil pump drive chain sprocket is pressed onto the front of the crankshaft.
油泵驱动链轮上按下了曲轴的前面。
High flow midship pump. Up to 2250 GPM. The best selling single stage pump. Midship Split Drive Line Manifolded pump.
高流量中置泵，最大流量达2250GPM。是最畅销的单级泵。复合以中置分离传动轴承泵。
The host pumps auxiliary pump adopts the hydraulicandpneumatic united drive, themovement is nimble and reliable.
主泵，泵采用液气联合驱动及无触点电气控制系统，运行平稳，换向灵敏可靠。
According to the use of pump rotational speed and torque requirements can be matched to a different pump rotor drive.
根据泵的使用方式，转速和扭矩要求，可以为转子泵匹配不同的驱动装置。
In general, with sales also drive the pump.
一般来讲，一同销售的还有泵的驱动系统。
Construction vehicle's hydraulic pressure drive system is composed of diesel, hydraulic pump, hydraulic motor and working system, they interact each other.
工程车辆液压驱动系统由发动机、液压泵、液压马达、行走机构组成，这四个部分之间相互联系和影响。
Used part of the rotor pump is a simple spur gear drive motor, electric screw fixation using pin.
部分转子泵采用的是简单的直齿轮驱动电机，电机采用地脚螺钉固定。
The locking plate includes a first aperture capable of receiving a hook extending from a pump head, a second aperture capable of receiving a drive shaft of the pump head, and a release member.
锁紧板包括第一孔、第二孔和释放元件，其中第一孔能够接收从泵头伸出的钩，第二孔能够接收泵头的驱动轴。
So I'm thinking of using a longer belt to drive both the SC and power steering pump. Is this OK?
我在想是否可用一根长皮带来同时驱动转向助力泵和增压器？
Foot mounting brackets are available also, when the pump must be run slower than direct-drive speeds allow, with belt or gear-reduction assembly.
当泵的运行速度慢于直接驱动速度时，底座安装支架也是可以的，带有传送带或减速齿轮部件。
Foot mounting brackets are available also, when the pump must be run slower than direct-drive speeds allow, with belt or gear-reduction assembly.
当泵的运行速度慢于直接驱动速度时，底座安装支架也是可以的，带有传送带或减速齿轮部件。
应用推荐