The drawing stress increased with the speed rise at low speed.
在低速拉拔时，拉拔应力随拉拔速度的增加而增大。
The drawing stress did not change when the speed increase further.
继续增大拉拔速度，拉拔应力变化不大。
Then with the upper-bound theorem and the surface integral an analytical solution of the drawing stress was first obtained.
入口截面不消耗剪切功率，然后用上界定理与曲面积分方法首次得到了用余弦模拉拔方棒时变形力的解析解。
A bar type traverse domain generates and grows up under the effect of the transverse drawing stress and it is broken into a dotted magnetic domain structure following the increase of stress.
在横向拉应力下，横向条状畴形成并增长。应力增大，横向条状畴碎化形成点状畴结构。
Through performance research of FYT, SBS modified bitumen and epoxy asphalt, shearing stress, drawing stress and aging performance of three water proofing and adhesion material have been compared.
通过对SBS改性沥青、环氧沥青、FYT桥面二涂防水粘结材料三种防水粘结材料的性能研究，对比了三种防水粘结材料的剪切强度、拉拔强度和老化性能。
Measures for avoiding wrinkle has been considered after analysing the stress and strain of metal during drawing process.
通过对其拉延成型过程中，金属的应力应变的分析，提出了防皱措施。
The stress boundary constitutes an important factor in drawing curved surface parts.
曲面零件拉深成形中，应力分界圆是非常重要的因素。
He feels that there is not enough stress on drawing at the school.
他认为学校对绘画重视不够。
To remove internal stress such as those produced by drawing, bending, or welding.
去除内应力，如用冲压、完全或焊接成型的工件。
Like the man depicted in the drawing, they fear that they will be overwhelmed by the great stress and tension.
如图中被描述的那个男人那样，他们担忧他们会被巨大的紧张与压力压垮。
The drawing process for producing the part is completed in one operation, and a hole for machining use is pre-punched to control the magnitude of radial stress.
采用一次拉延成型，并在其底部预冲工艺孔，可控制径向应力的大小。
Residual stress is produced inevitably in steel wire in the course of drawing, which may affect products quality as the stress is strong.
钢丝在拉拔过程中不可避免地会产生残余应力，严重时会影响产品的质量。
When working, coiled tubing is loaded by bending, drawing and inside pressure, so that it would bear three dimension stress.
连续油管在工作时除受卷绕弯曲和拉伸载荷作用外，管内常受到内压作用，承受三轴应力。
Cauchy stress, plastic strain and slipping-off distribution in the workpiece during drawing process are given.
模拟得出了变形过程中的应力应变状态和错动量分布。
The stress characteristic of the main working methods for processing the special-shaped wire, such as drawing, driven roller die and rolling was analyzed.
针对异型材的几种常用加工方法，如拉伸、辊拉、轧制等，分析它们在加工中的应力特点。
The differences between the coal drawing face and non-coal drawing face are low stowing factor in the goaf, vigorous movement of roof, and high stress peak abutment pressure along the strike.
放顶煤工作面与非放顶煤工作面的区别是，采空区充填系数小，顶板岩层运动剧烈，走向方向超前支承应力峰值较大。
It showed that a fast cooling after drawing was of benefit to dimensional stability, straightness, environmental stress cracking resistance, and strength of the drawn tubes.
拉伸时的自然冷却会产生不均匀的产品，快速水冷却拉伸工艺能显著改善管的耐环境应力开裂性，成倍提高其强度。
The surface residual stress of tube and bar after drawing straightening and annealing, under different processing conditions, were measured by means of resistance strain gauge.
用电阻应变片法测试了管棒材拉拔、矫直和退火过程中产品表面残余应力，研究了管棒材残余应力随工艺参数变化的规律。
This software package can calculate electric field in different stress cone shape by finite element method, and can present following functions: drawing equipotential line;
开发的软件包对不同的应力锥形状下的场强采用有限元方法进行计算并提供以下功能：画出任意电位的等位线；
The paper mainly focuses on the analysis of the distribution of stress and strain in the flange of a cup-shaped part during deep drawing, according to the plastic mechanics theory.
用塑性理论求得杯形件拉深成形工艺过程中凸缘部分的应力与应变分布的解析解。
In of displacement induces shear stress. Shear deformation this paper, flow law of material is theoretically analysed based on deformation of the flange deformed area in box drawing.
针对盒形件拉深成形时法兰变形区的变形进行了材料塑性流动的理论分析，提出了位移速度差诱发剪应力的观点。
The magnitude and symbol of the residual stress greatly depends on the initial deformation rate of the pipe under drawing with the working tools.
残余应力的符号和大小在很大程度上取决于钢管在拔制工具中的初始变形率。
As an important part of Chinese painting, line-drawing has its typical and common characteristics of all Chinese drawings, that is, being impressionistic and stress on calligraphic style of drawing.
作为中国画的重要组成部分，白描有很典型的特点，这也是中国画的共同特点，即写意性和强调书法用笔。
In this system the structure plan design, the load computation, the stress analysis, matches the muscle calculation, the construction drawing plan integration as a body.
在该系统中把结构方案设计、荷载计算、受力分析、配筋计算、施工图绘制集成为一体。
As an important part of Chinese painting line-drawing has its typical and common characteristics of all Chinese drawings that is being impressionistic and stress on calligraphic style of drawing.
作为中国画的重要组成部分，白描有很典型的特点，这也是中国画的共同特点，即写意性和强调书法用笔。
The V-anvil drawing process of large forgings was simulated using FE software, and the stress-strain distributions in the plastically deforming area were compared after different V-anvils drawings.
利用有限元软件模拟了V型砧的锻造拔长过程，并对不同夹角的V型砧压下后锻坯塑性变形区内应力、应变的状态进行比较。
In addition, the stress-strain of typical points in simple tension, drawing, and extrusion was successfully analyzed by the figures.
利用正应力图形和剪应力图形，分析了单向拉伸、拉深及挤压工序中典型点的变形类型及尺寸变化趋势。
In the base of the flow stress model of AZ31, finite element analysis software DEFORM was used to research the drawing of the notebook PC case with magnesium alloy AZ31 sheet.
在材料模型的基础上，利用DEFORM有限元软件对AZ 31变形镁合金板温拉深笔记本外壳实验做了模拟。
It showed that a fast cooling after drawing was of benefit to dimensional stability, straightness, environmental stress cracking resistance, and strength of the drawn tubes.
数据说明拉伸后的快速冷却有利于管的尺寸稳定和直线度改善。
It showed that a fast cooling after drawing was of benefit to dimensional stability, straightness, environmental stress cracking resistance, and strength of the drawn tubes.
数据说明拉伸后的快速冷却有利于管的尺寸稳定和直线度改善。
应用推荐