Device Layer: The IMS architecture provides a variety of choices for users to choose end-point devices.
设备层：IMS体系结构提供了各种选择，供用户选择端点设备。
It is chiefly composed of a propeller, a rotary shaft, a motor, a spray cup, a battery, a device layer and a bottle.
它主要由螺旋桨、转轴、马达、喷头、电池、装置层、瓶构成。
Swing basement transformer with mobile crane from first floor openings and swing scaffold on device layer with tower crane.
地下室变压器用汽车吊从首层预留洞吊运，塔楼设备利用塔吊吊运设备层临时平台。
When first setting up your systems, start from the bottom (the physical layer) as you configure your disk, the device layer, its logical volumes, file systems, and the files and application.
在第一次设置系统时，对于磁盘的配置，可以从最底层(物理层)开始，然后是设备层、逻辑卷、文件系统、文件和应用程序。
Non deterministic communication delay of Ethernet which can't satisfy the real time request of industrial control has become the main obstacle in application on filed device layer network.
以太网存在通信不确定性，不能满足实时性要求，成为应用于工业现场设备层网络的主要障碍。
When first setting up your systems, start from the bottom (the physical layer) as you configure your disk, the device layer, its logical volumes, file systems, and the files and application.
在第一次设置您的系统时，对于磁盘的配置，可以从底层(物理层)开始，然后是设备层、逻辑卷、文件系统、文件和应用程序。
The underlying network architecture can be divided into three layers (Device layer, Transport layer, and Control layer) plus the service layer and will be introduced from bottom to top respectively.
基础网络体系结构可分为三个层次(设备层、传输层和控制层)，其上还有服务层，我们将按照从下向上的顺序分别进行介绍。
The Transport Layer contains classes that are the actual implementation of protocols that carry messages to the mobile device.
传输层包含这样的类：它们实际实现了将消息传送到移动设备的协议。
This layer should make the multipath solution transparent to users by showing them only one device and path.
这个层应该让多路径解决方案对于用户是透明的，只向他们展示一个设备和路径。
Examples of devices at this layer include the SLIP driver over a serial interface or an Ethernet driver over an Ethernet device.
例如，包串口使用的SLIP驱动程序以及以太网设备使用的以太网驱动程序都是这一层的设备。
The various network device drivers run at the interface layer, which receives and transmits data from and to the physical link.
各种网络设备驱动程序在接口层运行，该层从物理链路接收数据，并向物理链路传输数据。
Next is the block device drivers layer, which contains the various block drivers for underlying devices.
接下来是块设备驱动器层，它包括针对底层设备的各种块驱动器。
Even your physical volumes themselves are part of the logical layer, as the physical layer only encompasses the actual disks, device drivers, and any arrays that you might have already configured.
甚至物理卷本身也是逻辑层的一部分，因为物理层仅包含实际的磁盘、设备驱动程序和任何可能配置的阵列。
The link layer refers to the device drivers providing access to the physical layer, which could be numerous mediums, such as serial links or Ethernet devices.
链路层是指提供对物理层访问的设备驱动程序，这可以是各种介质，例如串口链路或以太网设备。
This layer provides a common set of functions to be used by lower-level network device drivers to allow them to operate with the higher-level protocol stack.
这一层提供了一组通用函数供底层网络设备驱动程序使用，让它们可以对高层协议栈进行操作。
Next is another agnostic layer that permits a common interface to and from the individual device drivers that are available, followed at the end by the individual device drivers themselves.
然后是另外一个协议无关层，提供了与各个设备驱动程序通信的通用接口，最下面是设备驱动程序本身。
This layer is literally the interface between the host (your computer) and the controller (the Bluetooth device).
这一层顾名思义就是主机(计算机)和控制器(蓝牙设备)之间的接口。
On the plus side, a resistive layer over a plastic screen does make for a device that's generally robust and unlikely to be damaged by a fall.
有利的方面是，使用塑料层的电阻触屏设备总体上更不易损，更不容易摔坏。
Recently, a new application program interface (NAPI) was introduced into the kernel to allow drivers to interface with the device agnostic layer (dev).
最近，内核中引入了一种新的应用程序编程接口（NAPI），该接口允许驱动程序与设备无关层（dev）进行交互。
IrLAP is the link accesses protocol layer responsible for IrDa device discovery, retransmission, and flow control.
IrLAP是负责IrDa设备发现、重传以及流控制的链路存取协议层。
The link layer provides the physical interface to the communication medium (such as an Ethernet device).
链路层(link layer)提供了通信介质的物理接口(例如以太网设备)。
SDP is the service Discovery Protocol layer, which is used whenever you want to find services on a remote Bluetooth device.
SDP是服务发现协议(Service Discovery protocol)层，用于在远程蓝牙设备上寻找服务。
Before the headset can start communicating with a Linux device, it must be discovered by the Bluetooth link layer on the Linux device.
在耳机可以开始与Linux设备通信以前，它必须被Linux设备上的Bluetooth链路层检测出来。
This queue is managed bv Linux's "netdevice" layer that sits in-between IP and device drivers.
该队列由Linux的“netdevice”层来管理，它位于IP和设备驱动之间。
Therefore, the Linux USB layer, the BlueZ USB transport driver, and the BlueZ protocol stack are the main kernel layers that get the device working.
因此，LinuxUS b层、BlueZ US b传输器驱动程序以及BlueZ协议栈是使设备工作的主要内核层。
The first layer of defense is that queries to the database always include the file type and mode bits from the real file on disk, not just the device and inode.
第一层防御是在数据库的查询中总是包含文件类型和来自磁盘上实际文件的模式位 (mode bits)，而不只包含文件的设备和inode 号。
Whenever a new SCSI device is attached to a system, the sd_probe function is called from the SCSI mid layer.
只要有新的SCSI设备附加到系统，SCSI中间层就会调用sd_probe函数。
Below the protocols layer is another agnostic interface layer that connects protocols to a variety of hardware device drivers with varying capabilities.
协议层下面是另外一个无关接口层，它将协议与具有很多各种不同功能的硬件设备连接在一起。
That adds yet another layer of security: worrywarts can set the device to require a concerto's worth of fingerprints before it gives out the PIN code.
这自然把安全提高了一个层次：不怕麻烦的人还可以对这个仪器进行设置，只有当指纹全部满足要求时，才能显示客户的身份证号码。
As nozzles expel the pearly material, layer by layer, you imagine the elaborate designs this device could make on gingerbread cookies.
当喷嘴层层喷洒这些珍珠粉般的物质时，你大可以想象这台机器将如何在姜饼上面绘制精美的图案。
应用推荐