Based on the thorough theory research in both the above concept and method, analyses for two practical application examples are made and the beneficial design parameters are obtained.
在对上述概念及方法进行深入理论研究的基础上，对两个应用实例作了分析，得出了有益的设计参数。
This paper presents a new single-end fault location device based on traveling wave, detailedly describing the design of its hardware and software as well as the research on fault location method.
为此，提出了一种基于行波法的单端故障定位装置的开发思路，并详细介绍了该装置硬件、软件的设计工作及故障定位方法的研究。
Then, through the task analysis, card sorting and focus group, a design sample of IA is put forward based on the target user research, and the design process and method of IA are explored.
然后，通过任务分析用户实验、卡片分类实验和焦点小组方法，探索用户界面信息建构的程序和方法，提出了一个基于目标用户研究的用户界面基本信息架构的设计样本。
On the basis of previous research, this thesis respectively designs the upper and lower computers' software system based on modularize design method.
在前人研究的基础上，本文采用模块化设计方法设计了上下位机各自的软件系统。
As the domestic and oversea research illustrated, the reflective analysis method based on meta-level technology can adapt its behavior to different state of system object and design flexible systems.
国内外的研究表明，基于元层技术的反射分析方法可以根据系统对象的不同状态做出不同的行为调整，有效的设计灵活的系统。
The displacement-based seismic design method is particularly proposed and some unsolved problems and future directions in the research and applications of this method are listed.
着重探讨了直接基于位移抗震设计的方法和步骤，并提出了该方法在今后的研究与应用中需要解决的若干问题。
The type spectrum and the method based on the matrix and MATLAB offers new approaches to the research of the complex planetary gear transmission and the design of the automatic transmission.
该型谱和基于矩阵与MATLAB的传动分析方法，为研究复杂行星齿轮机构和设计汽车自动变速器提供了新的途径。
Based on theoretical research and engineering experience, an overall method of reinforcement and design is offered on existing building by citing a typical reinforcement sample of some library.
以某图书馆的结构改造加固典型实例，结合理论研究和工程经验阐述了综合性的加固方法和改造设计思路在旧有建筑改扩建工程中的应用和实践。
Based on the research experience of semi-armor-piercing warhead, integrated design method for SAPW was studied by advanced engineering design method and computer technique.
文中基于半穿甲战斗部研制的经验和技术，利用先进的工程设计方法和计算机技术，完成了半穿甲战斗部集成设计方法研究。
Through research on design reuse and Case-Based Reasoning, modeling method based on product development process model reuse is presented and described in detail.
通过对设计重用和基于实例推理机制的研究，提出了基于知识产品开发过程模型重用的建模方法，并对其进行了详细描述；
Based on the man-machine interface design research of domestic and overseas, this paper brings forward a direct MMI design method which integrates the optimization with the evaluation.
该文在综合国内外人机界面设计研究方法的基础上，提出了一种集优化设计及评价为一体的装甲车辆人机界面直向设计方法。
The feature-based design is an efficient method in the research of the integrated CAD/CAM in recent years.
基于特征设计是近年来在CAD／CAM集成技术研究中的一种有效解决方法。
The research on the design method of traffic safety facilities of tourist highway is based on the classification of tourist highway.
从旅游公路的分类入手研究旅游公路交通安全设施的设计方法。
Research and development of perfonnance-based seismic design theory and method are task paid extensive attention by international academia and engineers at present.
基于性态的抗震设计理论和方法是目前世界各国学术界和工程界广泛关注的课题。
This paper takes design and realization for feature extraction based vehicle tracking method as subject to do further research.
本文就基于特征提取的车辆跟踪方法的设计和实现进行了深入的研究。
Besides, based on the research at home and abroad, we proposed design and evaluation method of asphalt treated base aggregate gradation and mixture design method of asphalt treated mixture.
在国内外沥青稳定碎石研究的基础上，给出了功能层混合料矿料级配组成的设计和评价方法及功能层混合料配合比设计方法。
Based on the research of oil production design of beam bump in directional Wells, we bring forward the principle and method for optimization and set the design model for oil production.
对定向井有杆泵采油设计进行了研究，提出了优化设计的原理和方法，建立了定向井有杆泵采油设计模型。
According to these two points, this dissertation starts the research of the product model in FEM field, and puts forward the method of rapid variant design of part family's FEM model based on SML.
本文基于上述两点，对面向有限元领域的产品模型进行一定深度的研究，提出了基于事物特性表的零件族有限元模型快速变型设计方法。
Based on the work of the formers, this paper gives emphasis on the research of some problems about the design method and the harmonics suppression of the active integrated antenna (AIA).
在前人工作的基础上，本文着重对有源集成天线的单元设计方法和如何抑制有源集成天线的谐波辐射进行了研究。
Moreover, based on the research, I summed up two kings of design method of bath products : the actual measure method and the space deductive method.
另外，通过研究，总结出两种适合健康卫浴设计的设计方法：实际尺寸测量法和空间演绎法。
This paper established a method to research the characteristics of gear transmission system based on the design parameters of gear system, the dynamic performance of gear system can be estimated.
本文建立一个基于设计参数的非线性齿轮系统特性研究方法，能够评估齿轮系统的动态性能。
Part six summarizes the whole paper as an epilogue, appraises the method of design based on the research on this thesis, and puts forward the direction in the later research.
第六章结语，对全文进行总结，并针对本文的研究方法做出评价，并提出今后的研究方向。
Against to Direct Displacement-based Seismic design, this paper, based on previous research achievements, manages to solve two problems, and it will make this new design method more perfect.
本文在以往基于位移的抗震设计研究基础上，着力解决直接基于位移的抗震设计中的两个问题，以使这种新的抗震设计方法更加完善。
This paper makes a deep research on generating integration testing scenarios method based on UML design pattern and the testing of polymorphic in software.
本文对基于UML设计模型的生成集成测试线索方法和程序多态性的测试问题进行了深入研究。
This article discusses the design principle and the method of a high accurate electronic tongue which is based on a three-electrode structure for solution system characteristics research.
阐述了一种基于电化学三电极体系、研究溶液体系特性的高性能电子舌的设计原理和方法。
Systematic research method was mainly used: Firstly, researches in the paper were based on ideas of SE. Secondly, structured process models of different design stage were established.
本文针对产品系统化设计若干关键理论问题开展研究，是对基于系统工程的产品综合设计理论与方法的继承性研究。
The research work involves reliability calculation method, wind-induced analysis, sensitive analysis and reliability-based design method of the cable-stayed double-layer cylindrical latticed shell.
本文以斜拉双层柱面网壳结构为研究对象，对可靠度计算方法、风致响应分析、敏感性分析和基于可靠性的设计方法等方面进行了研究。
The research work involves reliability calculation method, wind-induced analysis, sensitive analysis and reliability-based design method of the cable-stayed double-layer cylindrical latticed shell.
本文以斜拉双层柱面网壳结构为研究对象，对可靠度计算方法、风致响应分析、敏感性分析和基于可靠性的设计方法等方面进行了研究。
应用推荐