• It also registers an interrupt service routine's address to service interrupts generated when wireless data is sent or received.

    它还会注册一个中断服务例程的地址以服务收发无线数据时产生的中断。

    youdao

  • If a file is completely missing, data is garbled beyond recovery, or an essential element is absent in an XML document, that is when you interrupt your user's work.

    如果一个文件完全丢失了,数据已经篡改而无法修复,或在XML文档中缺少必需元素,这时可以中断用户的工作。

    youdao

  • An ACL packet, which can interrupt the regular flow of SCO data.

    为一acl数据包,可中断正常的SCO数据流。

    youdao

  • Before the interrupt is raised, all other pre-requisites (setting up any address, data, etc.) for that interrupt should be handled in the kernel thread.

    在触发中断之前,该中断的所有其他前提条件(设置地址、数据等)都应该在内核线程中进行处理。

    youdao

  • Interrupt transfers: These are data packets that are polled periodically.

    中断传输:这些是定期轮询的数据包。

    youdao

  • If a D-cache miss (the processor fails to find data in the D-cache) occurs, an interrupt is raised so that the corresponding register can record this event by increasing its value.

    如果发生D -cache失效(处理器无法在D - cache中找到数据),那么发出一个中断,让相应的寄存器可以通过增加它的值记录这一事件。

    youdao

  • The Orinoco interrupt service routine populates sk_buffs with data received from the WLAN and passes it on to the IP stack via netif_rx.

    orinoco中断服务例程用从WLAN接收的数据填充sk _ buffs,并经由netif_rx将它传送到ip栈。

    youdao

  • 3nn-data Storage Interrupt (DSI).

    3nn -数据存储中断(dsi)。

    youdao

  • If it is MAGIC_NUMBER, get the data/interrupt register values from the structure passed and generate the interrupt as per the structure values.

    如果该值是 MAGIC_NUMBER,就从所传递的结构中获取数据/中断寄存器的值,并按照这个结构的值来产生中断。

    youdao

  • In addition to the necessary module includes and variable declarations, the signal-interrupt catcher is defined to allow the associated header for each data run to be printed out.

    除了必要的模块包含及变量声明之外,信号中断捕捉程序被定义为允许输出每个数据运行的相关的头文件。

    youdao

  • All CPU and interrupt behavior information was also derived from the SAR data.

    所有CPU和中断信息也来自sar数据。

    youdao

  • Device drivers use these routines to request various types of data transfers (control, interrupt, bulk, or isochronous).

    设备驱动程序使用这些例程来请求各种类型的数据传输(control、interrupt、bulk或isochronous)。

    youdao

  • The dsirr (Data Storage Interrupt reason Register) indicates the type of page fault that has occurred.

    dsirr(数据存储中断原因寄存器)表示发生的页面错误的类型。

    youdao

  • The dsisr (Data Storage Interrupt Status Register) indicates why the page fault could not be resolved.

    dsisr(数据存储中断状态寄存器)表示页面错误无法解决的原因。

    youdao

  • This means that the Dump Reason Code is 300, meaning DSI (DATA STORAGE INTERRUPT).

    这意味着转储原因代码为 300,即DSI(DATASTORAGEINTERRUPT)。

    youdao

  • To interrupt the telephone, teletype or data transmitting through sending a space character.

    通过发送一空格字符来中断电话、电传机或数据传输。

    youdao

  • Data between X9241 and SCM is transmitted with I2C Bus, and the software includes main program and interrupt subprogram.

    X9241采用二线串行i2c总线与单片机传递数据。其软件由主程序、中断子程序组成。

    youdao

  • By designing and compiling interface application driving program, the interrupt and query schemes of data transmission based on PCI bus are realized.

    并通过设计和编写接口应用驱动程序,实现了基于PCI总线方式下数据传输的中断和查询两种方案。

    youdao

  • Data in computer networks was transmitted by media, so data always arise question of cut out, interrupt, modify and gorge.

    计算机网络中的数据总是通过介质传送,所以数据常常出现被截取、中断、篡改、伪造等安全性问题。

    youdao

  • Flexible setting of interrupt and DMA is adopted in the software design, which improves the efficiency of data transfer and performance of DSP.

    在软件设计中,通过灵活设置中断与DMA,不仅提高了图像数据的传输效率,而且充分发挥了DSP的高速性能。

    youdao

  • Combining the project of telescope control system, the key technologies such as locking frequency, phase circuit, real_time data collecting, display and hardware interrupt are also presented.

    对实现高精度速度控制所采用的关键技术锁频锁相控制方法,计算机的实时数据采集、显示和硬中断等进行了介绍。

    youdao

  • Control transfer, interrupt transfer and bulk transfer are used to realize the transfer of different type of data and command.

    采用控制、中断和批量三种方式来实现不同类型数据或命令的传输。

    youdao

  • Considering the different data transmission fashions, we present two kinds of system structure which is named interrupt data transmission system structure and DMA data transmission system structure.

    根据数据传输方式的不同,本文提出了两种硬件加速系统结构——中断数据传输系统结构和DMA数据传输系统结构。

    youdao

  • The data acquisition circuit is composed of chip 89C52 and 8254. External measuring signal at interrupt mode triggers 89c52 to read number in 8254 counter.

    由89c52和8254组成数据处理电路。外部测量信号以外部中断方式触发89c52读取8254计数。

    youdao

  • Code generated for Silicon Labs single-cell C80519XXF by a non-OCG compiler results in an average of 108 cycles to execute the interrupt service routine and main loop overhead for each sample of data.

    非ocg编译器针对SiliconLabs单电池供电c 80519 XXF所产生的代码,每次数据采样平均会有108个周期来执行中断服务程序和主循环。

    youdao

  • A method of performing a fast interrupt in a digital data processor having the capability of handling more than one interrupt is provided.

    执行快速的方法中断在数字数据处理器具有处理更多的能力不是提供一个中断。

    youdao

  • MCU handles data from network by interrupt method. Data processing follows communication protocol.

    单片机对网络数据的响应为中断方式,数据处理遵循数据通讯协议的规定。

    youdao

  • For the purpose of data communication, the paper lodges the CAN interface circuit, and expatiates the programs of bus initialization, bus interrupt service routing, receiving and sending bus data.

    在数据通信方面,提出了由总线控制器与报文收发器构成的CAN总线接口电路,并详细论述了与总线接口初始化、总线中断处理、总线数据收发相关的设计实现过程。

    youdao

  • Personnel use the data to correct equipment and process issues before they can interrupt production.

    工作人员利用这些数据,在设备和过程问题导致生产中断之前,修正它们。

    youdao

  • Finally, it gives out the initial program, transmit data, receive data and interrupt handling programs.

    并给出了CAN的初始化、收发数据及中断处理过程的基本c程序。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定