Dial gauge with universal dial gauge bracket must be screwed to the cylinder block and placed against the crank arm.
百分表及通用百分表托架必须通过螺钉固定在气缸体上，位置与曲轴臂相对。
The mechanism consists of several parts like crankcase, cylinder block, pistons, connecting rod, crankshaft, etc.
这一机构有一系列部件组成，如曲柄箱、气缸体、活塞、连杆、曲轴等。
The oil pan and the lower part of the cylinder block together are called the crankcase; they enclose, or encase, the crankshaft.
油盘和气缸体的下部一起被称为曲轴箱，用来封闭或罩住曲轴。
The crankcase is the lower part of the engine cylinder block .
曲轴箱是发动机气缸体较低的部分。
The joint between the cylinder block and the head must be tight and able to withstand the pressure and heat developed in the combustion chambers.
气缸体与气缸盖之间的结合处必须保持密封，并且能够承受燃烧室产生的高压和高温。
The cylinder head fastens to the top of the block, just as a roof fits over a house.
气缸盖安装在缸体的顶部，就像安在房子上的屋顶一样。
This is fitted in the cylinder block and is driven by the chain drive.
机油泵安装在气缸体中，由链条驱动进行驱动。
After the Block is cleaned, inspect it for cracks, especially in the cylinder walls, top, water jackets, and main-Bearing webs.
气缸体清洁之后，检查有无裂痕，尤其是气缸壁、顶部、冷却水套和主轴承腹板。
Besides, the load caused by temperature field most affects the cylinder block.
温度场产生的载荷对气缸体影响最大。
A entity model for the cylinder block of YC6108 diesel engine has been constructed and the modal analysis been implemented.
建立了YC 6108柴油机气缸体的实体模型，并进行了有限元模态分析。
Piston ring excellent in resistance to scuffing, cracking and fatigue and method for producing same, and combination of piston ring and cylinder block.
有提高的抗擦伤性、抗裂性和抗疲劳性的活塞环，和它的生产方法，以及活塞环和气缸体的组合。
The joint between the cylinder Block and the head must be tight and able to withstand the pressure and heat developed in the combustion Chambers.
气缸体与气缸盖之间的接合处必须保持密封，并且能够承受燃烧室产生的高压和高温。
The numerical simulation of thermal stresses and deformation of an engine cylinder block casting was carried out by FDM/FEM integrated system.
对发动机气缸体铸件从浇注完到开箱落砂后的铸造过程应力场进行计算机数值模拟。
Cylinder head contains water jackets for cooling in the assembled engine, these water jackets are connected through openings to the cylinder-block water jackets.
气缸盖带有用于冷却的水套，在装配发动机时，这些水套通过出水口与气缸体水套相连通。
Like the cylinder block, the head is made from either cast iron or aluminum alloy.
像气缸体一样，气缸盖是由铸铁或者铝合金制成。
The cylinder head is attached to the block with high-tensile steel studs.
气缸盖与气缸体用高强度的钢螺栓缚连结。
The cylinder block of liquid-cooled engines forms the basic framework of the engine. Other parts are attached to the cylinder block or are assembled in it.
水冷发动机的气缸体是发动机的基本构件。其他部件都支承或安装在他它上面。
Cylinder block is an important part in motorcycle engine. There exists defects by conventional treatment.
气缸体是摩托车发动机的一个重要部件，采用常规方法处理存在缺陷。
The top of the block is covered with the cylinder head.
缸体的顶部覆盖的气缸头。
The paper analyzes the design optimization of core box using coated sand in Z8040 hot box core shoot machine to make the cylinder block cores and sprue cores.
分析Z8040射芯机用覆膜砂热芯盒法制作气缸体前后端面芯及其浇口砂芯优化设计方案。
An investigation was made on the reasons causing the poor machinability of cylinder block castings for Cummins engines.
针对国产康明斯气缸体铸件超高速加工条件下的加工性差问题进行了调查与分析。
Therefore, domestic and foreign USES it to make the cylinder block, the piston, the crank, the gear and the bed piece and so on easy wearing parts.
因此，国内外都用它来制造气缸体、活塞、曲轴、齿轮及机床床身等易磨损零件。
Therefore, domestic and foreign USES it to make the cylinder block, the piston, the crank, the gear and the bed piece and so on easy wearing parts.
因此，国内外都用它来制造气缸体、活塞、曲轴、齿轮及机床床身等易磨损零件。
应用推荐