Cutting fluid is the important related material in metal cutting process.
切削液是金属切削加工中的重要配套材料。
So it prepares for numerical simulation on metal orthogonal cutting process.
从而为正交切削过程的数值模拟奠定了基础。
Cutting parameters are the most important control factors in cutting process.
切削参数是切削过程优化最重要的控制因素。
To avoid welding spot cracking and decreasing physical strength during cutting process.
切割过程中，有效减少应力发生，防止焊点崩裂；
The tapping torque test is a real cutting test, it has a good relativity with cutting process.
攻丝扭矩模拟评定试验方法为真正的切削试验，与切削加工的相关性较强。
Multi closed loop control with feedforward control is implemented in the whole cutting process.
实现了对整个剪切过程的多闭环前馈控制。
Furthermore, the problem of accuracy controlling during cutting process is discussed in detail.
同时分析了数控刨削过程中的精度控制问题。
The rational choice of the cutter is one of the important ways to improve green cutting process.
刀具的合理选择是提高切削加工的绿色化程度的重要途径之一。
In the opal cutting process the potch is ground away from the presentation areas of the gem opal.
在蛋白石切割过程的大杂烩是地面距离的介绍领域的宝石蛋白石。
For high quality cutting process, large-area milling machine for cast aluminum bus bar was designed.
为适应高质量的切削加工要求设计铸铝母线专用大面铣床。
It is therefore important to understand the metal cutting process in order to make the best use of it.
因此了解金属切削过程以充分利用它是重要的。
An industrial television camera system is used to monitor and record the cutting process of Iceland SPAR.
利用工业电视摄像系统对冰洲石的切削过程进行观察和记录。
Different cutting parameters may have different influences on machining accuracy in metal cutting process.
金属切削过程中，不同的切削参数对零件的加工精度影响是不同的。
Metal cutting process is a very complex process. Fig. 7.2 shows the basic material removal operation schematically.
金属切削过程是一个很复杂的过程。图7.2用图的形式显示了基本材料去除作业。
The cutting process was performed through subtraction boolean operation of the solid model of workpiece and cutter.
利用齿坯实体模型和刀具实体模型做布尔减运算，来实现模拟工件材料的去除过程；
It discusses the water-jet cutting process by the balance of energy, and builds a mathematic model of cutting depth.
论文从能量平衡的角度探讨了射流切割的过程，建立了水射流切割深度数学模型。
Dynamic cutting force of blade was an important parameter reflecting the cutting process during the cut of sugarcane.
甘蔗切割过程中，割刀动态切割力是反映切割过程的一个重要参数。
It is always a great difficult around fabricators to cut the special orientation and prism of crystal in the cutting process.
在晶体加工中，特殊晶向及晶体棱镜的切割一直是困扰加工者的一大难题。
In this paper, author studies the position error-compensating control problem of cutting process by using the classical control theory.
本文作者运用经典控制论对切削过程的位置误差补偿控制进行了研究。
Garment cutting process is an important part of production, directly related to the enterprise cost management and production efficiency.
服装裁剪工艺是企业生产的重要环节，直接关系到企业的成本管理和生产效益。
Cutting process of straw is the first important tache for feeding and commercial production of straw during the utilization of straw feed.
秸秆的机械破碎加工是秸秆饲用和实现秸秆饲料商品化生产的首要环节。
The diamond films' breakage and desquamation from body surface are main damage forms of the diamond film-coated tools in the cutting process.
切削过程中金刚石薄膜从基体表面的破损剥落是金刚石薄膜涂层刀具的一种主要损坏形式。
In order to reduce the system chatter, in the cutting process, some specific cutting speed should be avoided to adopt for different machines.
针对不同的机床，为使减小加工过程中系统振动，应避免采用一些特定的速度；
Tests show that AE signals may be detected from background noises in cutting process, a few hundreds millisecond before tool break down abrupt.
试验结果证明，刀具破损前会出现预兆性的AE信号，并可把该信号从背景噪声中检测出来。
The optimized mechanism can satisfy the cutting process requirement, and enhance both the performance of flying shear and quality of workpieces.
优化后的飞剪机构满足剪切过程要求，同时提高了飞剪的剪切性能和轧件的剪切质量。
An experimental research was performed on the abrasive mixed with high pressure water efflux and the choice of parameters in the cutting process.
对高压射流中混入的磨料参数的选择进行了试验研究。
The keys to adaptive control with optimization of machining operations are modeling of cutting process and selecting of real time optimal strategy.
机械加工最优自适应控制的关键在于自适应加工模型的建立和实时优化策略的制定。
Phenomenon of erosion delay in forming kerfs by abrasive waterjet will cause kerf incline in straight cutting or kerf taper in circular cutting process.
磨料水射流加工在切口形成过程中出现冲蚀延时现象，从而在直线切割时形成切口斜度，在圆形零件切割时形成切口锥度。
Phenomenon of erosion delay in forming kerfs by abrasive waterjet will cause kerf incline in straight cutting or kerf taper in circular cutting process.
磨料水射流加工在切口形成过程中出现冲蚀延时现象，从而在直线切割时形成切口斜度，在圆形零件切割时形成切口锥度。
应用推荐