To prevent large short-circuit current fault burns.
防止大的短路电流烧伤故障点。
An over current fault detected on power supply <number>.
在电源设备 <number>上检测到电流过高故障。
Then, in view of disadvantages of current fault diagnosis methods, some new methods and results are presented.
在此基础上，针对一些现有的故障诊断方法的不足提出了新的方法，并给出了结论。
This method has been applied to analysis of field test data of small current fault relaying, and obtained good results.
将该文提出的判别方法用于处理小电流单相接地故障保护的现场试验数据，获得了好的效果。
The purpose of this project is to extract information of current fault activity by analyzing data of thermal infrared remote sensing.
原计划通过分析热红外遥感数据，提取断层现今活动信息。
A visualized analysis system of leak current fault transmission graph is developed. Its functions, program structure and programming principle are described.
论述了自行研制设计的可视化漏电故障传播关系图分析系统的功能及程序结构与设计原理。
After analyzing current fault diagnosis methods based on multi-frequency sensitivity in analog circuits, a new sensitivity matrix analysis approach is presented to select testing frequency.
在分析现有模拟电路多频灵敏度故障诊断方法的基础上，提出一种新的测试频率范围的选择方法，即灵敏度矩阵分析方法。
The waveforms of the current fault component of two phases are symmetrical according to an analysis of wrong-phase-coupling. This characteristic can be quickly extracted by correlation analysis.
基于对异相短路的分析，发现两相电流故障分量波形呈现反向对称性，可利用相关分析法快速提取此特征。
If a client using your state machine service calls the wrong operation for the current state, the client will receive a fault to let it know what happened.
如果使用状态机服务的客户端为当前状态调用了错误的操作，则该客户端将接收一个错误，使其知道将发生什么情况。
If you do not pass in any arguments, fault analyzer USES the method described previously to find all the ADC mail-in databases on the current server.
如果没有传递任何参数，那么故障分析器使用前面描述的方法来寻找当前服务器上的所有adcmail - in数据库。
In a drive system of power transistor inverter-motor, not only can it be used in fine control of motor current waveform, phase, amplitude and frequency, but can also be used to sense, fault current.
在大功率晶体管逆变器——电动机驱动系统中，它不但可用来对电动机电流的波形、相位、幅值和频率进行精细控制，而且能快速地检测出故障电流。
In both cases, the fault is reported (report function) and-in the case of the arms-the arms are mechanically locked into their current state (lock function).
两种情况下都会报告错误(report函数)，对于手臂出错的情况，手臂被机械地锁定在当前状态(lock函数)。
The fault current limiting technology has become a hotspot of fault protect research.
短路电流限制技术已成为故障保护的一个研究热点。
The overall design scheme is researched. The hardware of current detection module, motor speed and location detection module and PWM output and fault input module is introduced in detail.
对系统总体设计方案进行了研究分析，硬件设计中详细介绍了控制回路的电流检测模块、电机转速和位置检测模块、PWM输出和故障输入电路。
NOTE: If you run ADC in Lotus Domino 6.x, when you upgrade to Lotus Domino 7 and enable fault analyzer, it processes all your current entries in the mail-in database the first time it runs.
注：如果在LotusDomino 6 .x上运行adc，那么在升级到Lotus Domino7并启用故障分析器时，它在首次运行时会处理mail - in数据库中的所有当前条目。
The location result is not influenced by fault resistance and inception Angle when wavelet transform coefficient of aerial mode current is used in fault location.
利用线模电流的小波变换系数进行测距，不仅不受故障电阻的影响，也不受故障起始角的影响。
On the other hand, it's hard to fault Amazon for what it charges when it can't fulfill demand at the current price.
但另一方面，我们很难指责亚马逊的要价，因为就是按目前的价格销售，Kindle仍供不应求。
Can reliably determine, within the community and bounds detection ma level and zero-sequence current phase short circuit fault current, automatic removal of single-phase ground fault and phase fault.
能可靠判断、检测界内与界外毫安级零序电流及相间短路故障电流，实现自动切除单相接地故障和相间短路故障。
If the fault Selector detects a fault, the current message will be processed by a fault Handler rather than by a Data Handler.
如果FaultSelector检测到一个错误，当前消息将由FaultHandler而不是Data Handler处理。
A superior solution is one in which breakers are current limiting by responding early and quickly to an increasing fault current.
一个较好的解决方法是，断路器在进行电流限制时，对上升的漏电电流做出较早的迅速的反应。
GTO over current rapid protection by gradation mode and limited protection conditions are studied based on the features of GTO and over current situation under fault state.
基于GTO器件特性和故障状态下gto的过流工况，研究了GTO过流分级快速保护模式和实现方法以及保护的极限条件。
Studies on fault current limiter of power system.
电力系统故障限流器技术的研究。
Another source is current difficulties, which people rarely tend to think are their fault.
另外一个源头就是当前面临的困难，通常人们很少会认为那是他们自己犯下的错。
The fault current limiting principle of SFCL-MES is tested on the model, and its validity is confirmed by the experiment.
在模型上对SFCL—MES的故障限流原理进行了试验，初步验证了它的有效性。
After injecting current into the head of line, the detector can check whether these branches flow current, the fault branch is that the current has flowed.
然后在线路首端注入电流，通过探测器检验几个分支上是否有电流流过，检测到电流的即为故障点所在的分支。
A fault current limiter offers an alternative in such case.
故障电流限制器提供了另外一种解决方案。
Fundamental investigations have been performed in this thesis on the fault current limiting schemes.
本论文对故障电流限制方案进行了基础性研究。
The theory of fault locating by calculating the reactance of feeder line with measured fault current and voltage is introduced.
介绍了利用故障电压和故障电流计算故障回路电抗值的电抗法故障点定位的原理。
The theory of fault locating by calculating the reactance of feeder line with measured fault current and voltage is introduced.
介绍了利用故障电压和故障电流计算故障回路电抗值的电抗法故障点定位的原理。
应用推荐