Surface cleaning is critically important for pipe coating, and shot (impeller) blasting is the most suitable derusting method for most kinds of coating materials.
钢管的表面处理是决定覆盖层质量的关键因素，对大多数覆盖层而言，喷(抛)丸除锈法是最理想的除锈方式。
Several kinds of coating materials were studied on their protective effects on the fibres.
试验比较了几种涂料对光纤的保护作用。
The noble metal oxide is coating materials of excellent electrocatalytic activity of the electrodes.
贵金属氧化物是性能优越的电极涂层材料。
The characteristics of lecithin and its application in foods, feedstuffs, coating materials and cosmetics were reviewed.
对卵磷脂的物理化学特性以及在食品、饲料、涂料和化妆等方面的应用进行了概述。
This paper refers to a new type of decorative coating, which is made by the addition of leather powder to coating materials.
本文研究了在涂料中加入皮革粉而制成的一种新型涂料。
The antibacterial coil coating materials remain relative stable and can be stored for at least 19 months.
抗菌卷材涂料稳定性能较好，抗菌卷材涂料贮存期能达到19个月。
The common evaporation coating materials have great dispersion and certain absorption in middle and long wave infrared region.
在中长波红外区域，通常使用的镀膜材料都存在相当大的色散和一定的吸收。
Interface strength is one of the most important properties of coating materials. There are no effective evaluation methods yet.
界面强度是薄膜涂层材料的最重要的性能指标之一，目前尚缺乏有效的测量方法。
The coating method, coating materials, treatment of cutter before coating, the rational use of coated cutters, etc. are reviewed.
本文就涂层方法、涂层材料、涂前刀具处理以及涂层刀具合理使用等问题作了综述。
To reduce the construction size of narrow band pass filter, it is needed to look for the coating materials with high refractive index.
为了简化窄带光学滤波器的结构，需要寻求更高折射率的膜层材料。
Good coating materials for absorption of laser in laser heat treatment (LHT) must be of high and steady absorption rate of laser spectrum.
理想的激光热处理吸收涂层必须在高温下具有高而稳定的光谱吸收率。
And coating materials of laser film, coating design, deposition techniques and ion assisted deposition parameters were researched in-depth.
并对激光膜的镀膜材料、膜系设计、沉积工艺及离子辅助沉积参数等进行了深入研究。
The effects of coating materials and spray welding processes on quality control of spray welded coating are thoroughly investigated in this paper.
本文深入研究了涂层材料、喷熔工艺对喷熔涂层质量控制的影响。
The paper describes the considerable factors of selecting anticorrosion coating materials for inner and outer of tank wall based on corrosion analysis.
文章通过对油罐内外壁的腐蚀分析，论述了选择油罐内外壁防腐涂料应考虑的因素，提出了油罐防腐施工中应注意的问题。
Chemicals centralized management is that all chemical materials except coating materials in automobile plant are supplied and managed by single supplier.
化学品集中管理是由单一供货商供应和管理汽车厂除涂装材料以外的所有化工材料。
The solidifying times of rapidly solidified powder coating materials are in close agreement with the results of conventional differential thermal analyses.
用该加热池测定快速固化粉末涂料的固化时间，其结果与经典的差热分析方法相近。
Laser cladding is a new surface strengthening technology which USES laser radiation to let coating materials and the surface of substrate melt simultaneous.
激光熔覆是利用激光辐射使熔覆材料和基体表面同时熔化并快速凝固、从而显著改善基体材料物理性能的一种新的工艺方法。
Summarizes present situation on corrosion protective coatings for long distance pipeline of TaHe oil field and characteristics of commonly used coating materials.
综述了目前塔河油田长输管道防腐层现状及常用防腐层材料的特点。
Use of organic coating materials and organic dissolvent will be controlled while water dissolvent coating materials and other substitute technology will be promoted.
严格控制有机涂料和有机溶剂的使用，鼓励使用水溶性涂料和其它替代产品、工艺。
The effects of layer thickness, spectral characteristics, sample fineness, supports and operating temperature on emission features of infrared coating materials are summarized.
本文总结了涂层厚度、涂料的光谱特性、衬底、使用温度、颗粒度等因素对涂料红外辐射特性的影响。
This article narrates the change of Chinese automobile coating materials market and the present status of international automobile coatings; and analyzes the trend of their development.
介绍了我国汽车用涂装材料市场的变化，以及国内外车用涂料现状，并对汽车涂装材料的发展趋势进行了分析。
The selection of coating materials and the release of core materials are introduced, the research and application situation is discussed and the future development trend is also proposed.
介绍了微胶囊壁材的选择、芯材的释放，讨论了微胶囊化技术的研究现状和在各行业中的应用，展望了今后的研究方向。
The finished production is prepared by the steps of fruit selection, washing, drying, preparation of sugar coating materials, coating of sugar coating, air drying, vacuum packaging and the like.
经水果精选、洗净、凉干、糖衣料配制、上糖衣、风干、真空包装等工序即为成品。
The paper briefly introduces the corrosion loss of steel pipes, how to use nonmetallic coating materials to control the corrosion of pipes and the rapid development tendency of coated steel pipes.
文章简要介绍了钢管的腐蚀损失和采用非金属材料涂层来进行钢管的腐蚀控制以及涂层钢管的迅速发展趋势。
The focus of this research field is to study the chemical equipment corrosion mechanisms and protection, thermal controlled safety coating materials and the development of flame retarded materials.
主要侧重化工设备的腐蚀与防护、安全热控涂层材料、阻燃聚合物材料等方面的研究。
This paper systemically introduced the features, principle, technological process and the application of coating materials, prepared by sol gel process, looked ahead the coming developing prospect.
较系统地介绍了溶胶凝胶法制备涂层材料技术的特点及一般原理。概述了溶胶凝胶法制备涂层的工艺过程以及涂层材料的应用。展望了未来的发展前景。
Water-based polyurethane and aqueous acrylic solutions were used as coating materials, Binder was added and new controlled-release fertilizers were prepared by using a fluidized-bed-coating method.
以水性聚氨酯和水性丙烯酸的水溶液为包膜材料，添加粘结剂，采用流化床包涂的方法制备新型缓控释肥料。
Water-based polyurethane and aqueous acrylic solutions were used as coating materials, Binder was added and new controlled-release fertilizers were prepared by using a fluidized-bed-coating method.
以水性聚氨酯和水性丙烯酸的水溶液为包膜材料，添加粘结剂，采用流化床包涂的方法制备新型缓控释肥料。
应用推荐