It is interlocked with the crankshaft via the chain drive.
它通过链条驱动机构与曲轴互锁在一起。
Remove chain drive wheel from crankshaft.
从曲轴上拆下链条驱动轮。
Fit chain drive sprocket on the crankshaft.
将链条驱动链轮安装到曲轴上。
The oil pump is driven by a chain drive on the crankshaft.
机油泵由曲轴上的链条驱动装置来驱动。
The chain drive is on the power output side of the engine.
链条驱动位于发动机的动力输出侧。
Camshaft from the crankshaft through the timing belt or gear or chain drive.
凸轮轴由曲轴通过齿形带或齿轮或链条驱动。
Machine from the reducer, chain drive, using polyurethane rubber roller, long life;
该机由减速机、链轮传动,采用聚氨酯胶辊,使用寿命长;
If there are noises in the chain drive area replacement of the individual parts is recommended!
如果链条驱动区域有噪音,建议更换单独的零件!
The chain drive consists of a duplex roller chain which drives both intake and exhaust camshafts.
链条驱动机构包括一条双排辊链,通过它来驱动进气和排气凸轮轴。
In the design of noncircular chain drive, the key problem is the design of pitch line of noncircular chain wheel.
在非圆链传动的设计中,一个关键问题就是非圆链轮节曲线的设计。
"Jumping over Teeth" in roller chain drive has a strong impact on smooth running and life of drives. So it must be averted.
滚子链传动中的跳齿现象严重地影响到传动的平稳性和寿命,因此必须设法避免。
All transmissions part changes from chain drive structure to synchronized tooth belt, which has more smooth transmission and less noise.
所有传动部件改以往的链条传动为同步齿形带传动,其传动更平稳,噪声更小。
This paper introduces the program desks of the roller chain drive CAD system and the drawing of the chain wheels' part drawings and so on.
本文介绍滚子链传动CAD系统的程序设计,以及链轮零件图绘制等内容。
The meshing theory and application of the dual meshing silent chain drive are investigated to reduce the polygon movement and the meshing contact.
本文通过分析齿形链传动过程中存在的多边形效应和啮合冲击,开展了双面啮合齿形链传动啮合理论与应用研究。
In the process of the silent chain drive used as the timing transmission in motor, the chain always suffers from meshing impact and waving for polygon action.
在发动机正时机构的齿形链传动中,由于存在多边形效应,链条中心线上下波动,链板啮入轮齿时存在啮入冲击。
Application: Food industry, drying, washing, and mechanical parts cleaning, drying, cooling, light-load transportation of objects, do the most basic chain drive.
应用:食品工业的烘干,洗涤,以及机械零件的清洗,干燥,冷却,轻载物体的输送,可做最基本的链式传动。
The paper mainly analyses the chain track sectional profile of non chain drive mechanism of an importing miming machine and researches on its stress state deeply.
本文着重对引进采煤机无链牵引机构的链轨截面轮廓进行分析,并对其受力进行较深入的研究。
This system can realize the design and correction and making drawing of roller chain drive automatically, and also can realize the integration of design and drawing.
该系统能实现滚子链传动设计与校核的自动化、绘图的自动化,并能实现了设计与绘图的一体化。
The virtual prototype model of indexing cam-roller chain drive system of die-cutting machine is constructed in the computer environment based on multi-body dynamics theory.
应用多体动力学理论,建立了包含分度凸轮-链系统的模切机步进系统虚拟样机模型。
In designing chain drive is applied other than using worm wheel drive as the imported equipment does. Using two-end bearing support will greatly increase the thickener's running cycle.
用制造和安装精度要求不高的链传动取代了原进口设备采用的蜗轮蜗杆传动,采用双端支承方式和滚动轴承,有效地提高了设备的运行周期。
Considering the structural characteristics of the intermittent chain drive system of die-cutting machine, a test rig was set up and a large number of experimental studies are performed.
针对模切机步进链传动系统的结构特点,建立了能够揭示该类系统动力学特性的实验台,并进行了大量的实验研究。
In odontoid chain drive, the chain bears a periodical alternating load, in which the impact load produced while the link meshes into the tooth of sprocket makes comparatively big effect.
在齿形链传动中,链条承受周期性的交变载荷,其中链节啮入轮齿时产生的冲击载荷影响较大。
The force conditions of the chain on a chain drive pumping unit without reverse rack are much more favorable than that on conventional chain drive pumping units, and can be well controlled.
无换向架链条抽油机的链条承受的总拉力为悬点载荷与平衡重的差值加连杆对链条的水平分力在链条上形成的附加拉力之和,受力状况优于普通链条抽油机,且能得到控制。
The paper introduces a kind of new harmonic drive structure_harmonic chain-drive. Geometry and ratio relations for basic structural units are discussed in the drive.
介绍了一种新型谐波传动形式—谐波链传动,并且论述了该传动装置中基本构件间的几何尺寸关系、传动比关系。
The result of calculation shows that qualified roller chains for drilling rigs are competent for the job on chain-drive pumping units.
计算结果表明,质量合格的石油钻机传动滚子链能胜任链条抽油机的传动。
The result of calculation shows that qualified roller chains for drilling rigs are competent for the job on chain-drive pumping units.
计算结果表明,质量合格的石油钻机传动滚子链能胜任链条抽油机的传动。
应用推荐