CFRP, after all, is 50 times as expensive as steel.
毕竟,碳纤维增强塑料比钢贵50倍。
It's his job to accelerate CFRP production from the slow trot of the usual manufacturing process to industrial speed.
他的工作就是使碳纤维增强塑料品平时缓慢的生产速度提高到工业速度。
BMW, however, is using a compression mold that can harden CFRP components in just 10 minutes at 100 degrees Celsius (212 degrees Fahrenheit).
然而,宝马公司用的是一种压缩模型,这种模型能在10分钟内以100摄氏度(212华氏度)的温度使这种碳纤维增强塑料制品变硬。
These molds will set the pace for the MCV body manufacturing process, explains Andreas Reinhardt, who oversees the production of the CFRP components for the project.
这些模具会加快大城车辆车体的生产进程,安德烈亚斯·莱因哈特解释说。他负责监督该项目碳纤维增强塑料的生产。
Finally worked over the Glue formula and its properties for the CFRP Plate.
最后研究了碳纤维复合板材配套用胶的配方及性能。
The application of CFRP in bridge reinforcement project is discussed as well.
并介绍了CFRP在桥梁加固工程中的应用。
Carbon fibers reinforced plastics composites (CFRP) is a main form of utilization of carbon fibers.
炭纤维增强树脂基复合材料(CFRP)是炭纤维应用的主要形式。
The microstructure on the hole surface of CFRP is a very important characteristic of the quality of hole drilling.
碳纤维复合材料的孔壁表面微观形态是孔加工质量的重要特征之一。
The results show that ANN is a feasible tool for predicting the ultimate bond strengths of CFRP bonded to concrete.
结果表明,运用人工神经网络对碳纤维布与混凝土的极限粘结强度进行预测是可行的。
Through the experiment of 16 CFRP strengthened RC beams, the stochastic parameters of random variables were obtained.
通过对16根CFRP加固混凝土实验梁受弯实验,得到了随机变量的统计参量。
The test results show that a good effect can be achieved with the joints reinforced by CFRP sheets and flat steel plate.
从对试验结果分析看,榫卯节点采用CFRP布和扁钢加固后都取得了良好的效果。
The shear strength formula for brick masonry walls reinforced with CFRP is presented, and has a good agreement with the test results.
提出了碳纤维布加固砖砌体墙的抗剪强度计算公式,其计算结果与试验结果吻合较好。
Carbon fiber reinforced plastic (CFRP) is an important kind of composite materials to produce light aircraft or large model aircraft.
碳纤维增强树脂基复合材料是生产轻型飞机或大型航模的重要材料。
The result of the reinforcement has been proved successful. It shows that the application of CFRP technique will have a good prospect.
实践证明该工程使用效果良好,显示了碳纤维材料加固技术的良好前景。
In spite of its high cost, the technical and economic benefits will be notable if the specific property of CFRP can be effectively used.
尽管CFRP价格较贵,但若能有效利用其独特的性能,则其经济效益将是显著的。
When strengthened with transverse CFRP, the ductility of the columns improved significantly, and the ultimate strength increased as well.
横向粘贴CFRP能显著地改善偏压柱的延性,柱的承载力也有所提高;
When the initial load is big, the secondary load could influence the performances of CFRP reinforcement on all aspects as mentioned above.
在结构承受较大初始荷载情况下,二次受力问题对加固梁的抗弯刚度、极限承载能力、延性存在一定影响;
The working mechanisms of the composite column at different stages are analyzed and the stress paths in concrete, steel and CFRP are given.
首先按不同阶段分析了该类构件的作用机理,然后给出了混凝土、钢管以及CFRP筒的应力途径。
In this paper, the behavior of the flexural RC member bonded with CFRP board on its vertical sides was investigated by the authors recently.
本文研究采用在混凝土构件侧面粘贴碳纤维板这种新形式加固受弯构件的受力性能。
The application FRP is a hot spot in the civil engineering, CFRP can be used most widely due to its good physical and mechanical capabilities.
纤维增强塑料(FRP)是土木工程应用的热点,而碳纤维(CFRP)以其良好的物理力学性能被应用得最广泛、最成熟。
Then, the influences of the layers of CFRP, thickness of steel plate, compressive strength of concrete on the reinforcing effect are analyzed.
其次,分析了碳纤维布粘贴层数,钢板的厚度,混凝土强度对加固效果的影响。
Also analyzed are the influences of CFRP ratio, Angle steel ratio, slenderness ratio and eccentricity to the mechanical properties of the columns.
同时在此基础上分析了长细比、含角钢率、含碳纤维布率和偏心距等因素对复合加固偏压柱力学性能的影响。
The application and simple calculating methods of the technology of CFRP are described in the reconstruction engineering of Xinjiekou shop in Nanjing.
介绍了碳纤维复合材料(CFRP)加固技术在南京新街口百货商店改造工程中的应用及其工程简便计算方法。
The study and application of carbon fiber reinforced plastics (CFRP) bars in concrete structures are now a hot point in the field of civil engineering.
碳纤维筋在混凝土结构中的研究及应用是目前土木工程领域研究的热点。
So far, a great deal of research work has been done for RC beams strengthened by bonded CFRP or steel plate, but only rather little for two-way RC slabs.
为此,本文着重对受集中荷载的外贴碳纤维或钢板条带的钢筋混凝土加固双向板的受力性能进行了试验研究。
CFRP has many advantages, such as lightness and high strength, etc. It has been widely used in bridge engineering especially in strengthening of Bridges.
碳纤维复合材料(CFRP材料)具有自重轻、强度高等许多优点,在桥梁工程尤其是桥梁加固工程上得到较广泛地应用。
Mechanical behavior of brick walls strengthened with CFRP plates under horizontal lateral load is analyzed using commercial finite element software ANSYS8. 0.
采用大型有限元软件ANSYS8.0,对单调水平荷载下碳纤维加固砖墙的受力性能进行了计算分析。
The results show that RC beams strengthened by CFRP or GFRP can increase the shear bearing capacity of the beams, but has little effect on the beam stiffness.
结果表明,采用纤维对钢筋混凝土梁进行剪切加固后,其抗剪强度明显提高,但对梁的刚度和变形影响较小。
The results show that RC beams strengthened by CFRP or GFRP can increase the shear bearing capacity of the beams, but has little effect on the beam stiffness.
结果表明,采用纤维对钢筋混凝土梁进行剪切加固后,其抗剪强度明显提高,但对梁的刚度和变形影响较小。
应用推荐