Three dimensional field of a variable geometry linear turbine cascade is simulated by CFD software NUMECA.
使用CFD软件NUMECA对变几何平面叶栅三维流场进行了数值模拟。
CFD software FLUENT is used to analyze the fluid field and FE software ANSYS to analyze the riser dynamic response.
在计算过程中，分别采用流体分析软件FLUENT分析流场和有限元分析软件ANSYS计算立管的动力响应。
Via analysis and calculation by CFD software and actual test, it is proved that great improvement has been achieved.
并通过CFD软件分析计算及实车试验，结果证明通风降温取得了较好的效果。
Also FLUENT, which is the large scale CFD software, has been applied to imitate the foaming process of aluminum melt.
利用大型计算流体软件——FLUENT对熔体直通气体发泡法过程进行模拟。
This paper according to the different factors and use the CFD software FLUENT established different simplified models.
本文分别针对上述不同因素，建立了不同的简化模型，利用FLUENT做了数值模拟。
A centrifugal compressor stage is designed with 1d method. The 3d flow field of the stage is simulated utilizing CFD software.
用一元的方法对一离心压缩机的级进行了设计，并用CFD软件对设计结果作了三维流场数值模拟。
Thirdly, CFD software FLUENT was applied to simulate the wiping process by rotor on the evaporating wall in two-dimension plane.
本文使用计算流体力学软件FLUENT对二维平面上转子对壁面液膜的刮擦过程进行模拟。
Two hypotheses are put forward and validated by CFD software. It is proved that the results are almost the same as the hypotheses.
接着对换热器的整体传热模拟作了简化，提出两种假设，并举例进行数值模拟验证，结果表明： 温度场的分布与假设相近。
Based on the structure traits of this kind of building, the paper simulates four different air conditioning schemes by CFD software.
本文根据此类建筑的结构特点，借助CFD软件对四种空调方案进行了模拟。
WANG Fujun. Computational Fluid Dynamics Analysis-Theory and Application of CFD Software [m]. Beijing: Tsinghua University Press, 2005.
王福军。计算流体动力学分析—CFD软件原理与应用[M]。北京：清华大学出版社，2005。
The main contents include: 1 the flow field and sound field were simulated with CFD software for the indoor unit of the air conditioner.
主要研究内容包括：1利用CFD软件对挂壁式空调器室内机进行流场和声场模拟。
Numerical analysis of the kerosene spray supersonic combustion was carried out in the dual-mode supersonic combustor with the CFD software.
利用计算流体力学软件对煤油在所设计的双模态超声速燃烧室内的超声速喷雾燃烧进行了数值模拟。
The model which is solved by CFD software uses a set of dynamic differential equations to describe the dynamic process in one discharge tube.
此方法是在建立一系列的控制方程的基础上来描述激光腔内的气体流动过程，并通过CFD软件求解控制方程组。
The internal flow field of multi-turbine is studied by CFD software, and the simulated pressure drops and torques are discussed in this paper.
应用CFD软件对涡轮钻具组的内流场进行了分析研究，重点讨论了模拟压降和扭矩。
In this thesis, simulation on intake and injection process of the TY3100 non-road diesel engine was carried out by using CFD software STAR-CD.
本文利用STAR - CD软件对非道路用柴油机TY 3100的进气压缩及喷雾过程进行了三维数值模拟研究。
In order to predict the hydrodynamic performance of propeller with boss cap fins, CFD software was used to calculate the its open water performance.
为了预报毂帽鳍的水动力性能，采用计算流体力学软件对粘性流场中毂帽鳍的敞水性能进行计算研究。
With the aid of CFD software NUMEC a, computational simulating is performed on an Axial-flow compressor for the study of casing treatment mechanism.
本文以某亚音轴流压气机为原型，主要借助数值模拟手段展开了对机匣处理机理的研究。
In this paper, the business CFD software PHOENICS is adopted to simulate the velocity and streamline distribution of a rectangular sedimentation tank.
本文利用CFD商用软件PHOENICS，模拟平流式二沉池内的流线和速度分布。
By computing through the comprehensive CFD software, FLUENT 6.1, the flow field of mixture flow and the sludge distribution is simulated and analyzed.
采用大型计算流体软件FLUENT 6.1进行计算，模拟并分析了氧化沟沟内的混合液流场及污泥分布。
In this paper a reliable commercial CFD software FLUENT is introduced to simulate the viscous fluid field around the trimaran sailing in shallow waters.
本论文就是利用较成熟的商业软件FLUENT对处浅水域情况下的三体船周围的粘性流场进行数值模拟。
CFD software is used to perform 3-d numerical simulation of steam flow field inside direct air-cooling exhaust steam pipe of a 660 MW supercritical unit.
利用计算流体动力学软件(CFD)，对某660MW超临界发电机组直接空冷排汽管道内的水蒸汽流场进行了三维数值模拟研究。
By using CFD software FLUENT, numerical simulation for the three-dimensional flow of air between honeycombed plate heat transfer components is carried out.
应用CFD软件FLUENT对蜂窝板传热元件板间空气的三维流动进行了数值模拟。
By using the dynamic mesh model in CFD software to calculate the pipe valve closing, use the characteristic method and the experiment to compare with the same model.
运用计算流体动力学(CFD)的动网格技术对管道中的阀门关闭进行了动态模拟，针对同一模型，并与特征线法及试验进行了比较。
By using CFD software flow characteristics of S-shaped inlet are analyzed. Furthermore, the effect of fuselage on the inlet by means of the Angle of attack is given.
利用计算流体力学(CFD)方法分析了S形进气道的内流特性及机身对S形进气道性能的影响。
On the wind engineering problems, based on general CFD software, the establishment of appropriate numerical models can meet the requirements of the engineering practice.
结构抗风实际工程问题中，基于通用CFD软件，建立适当的数值模型可以获得满足工程实践要求的计算结果。
This article studied the influence of heat and pollutant sources on indoor air environment in a VAV air conditioned office with the application of professional CFD software.
本文用数值模拟方法模拟研究了室内热污染源对室内环境的影响。
This article studied the influence of heat and pollutant sources on indoor air environment in a VAV air conditioned office with the application of professional CFD software.
本文用数值模拟方法模拟研究了室内热污染源对室内环境的影响。
应用推荐