Inner enamel is mainly composed of ceramic layer and special enamelled steel two materials.
搪瓷内胆主要有瓷层及专用搪瓷钢板两种材料组成。
The carbon steel sample is coated with a uniform dense ceramic layer by chemical reaction method.
采用化学反应法，在普通碳素钢上涂覆一层均匀致密的陶瓷涂层。
The ceramic layer is composed of or includes a wavelength converting material such as a phosphor.
该陶瓷层由诸如磷光体之类的波长转换材料组成或者包括诸如磷光体之类的波长转换材料。
The ceramic layer does not crack or flake off when the composite pipe receives a mechanical shock.
在受到一般性的机械冲击时，陶瓷层不碎、不裂。
The morphology and the structures of the micro arc oxidation ceramic layer was observed and analyzed.
观察、分析了镀铝层表面微弧氧化陶瓷膜的微观形貌以及组织结构；
The microstructure, compositions and elements of the ceramic layer were analyzed by SEM, XRD, IR and XPS.
用SEM，XRD，IR，XPS等观察陶瓷层的组织结构和元素、官能团，并对钙、磷进入机制进行探讨。
The microstructure of the ceramic layer is columnar and its growth direction is perpendicular to the substrate surface.
陶瓷熔覆层的组织为柱状晶。其生长方向与基体表面垂直。
A catalytically active material may then be incorporated in the ceramic layer, so as to form a catalyst structure (16).
然后，在陶瓷层中加入催化活性材料以形成催化剂结构(16)。
Through the test of dipping molten iron thermal shock, a large number of cracks generated in the ceramic layer were discovered.
通过浸蘸铁水热震试验，发现涂层内有大量裂纹产生。
As the the number of thermal shock increasing, in the partial region of ceramic layer, the crack in all directions interweaved together.
而且随着热震次数的增加，在陶瓷层局部区域，各种方向的裂纹交织在一起。
The relative theoretical and technological problems in the research field of laser cladding ceramic layer in recent years were summarized in this paper.
对近年来激光熔覆陶瓷涂层技术中的有关传热和界面特性等理论问题及与之相应的工艺方面的研究进行了归纳总结。
From inner to outside, the composite pipe consisted of alumina ceramic layer, metal transition layer, white cast layer, carbon atom diffusion layer and nodular cast iron layer.
复合管从里到外由氧化铝陶瓷层、金属过渡层、白口铸铁层、碳原子扩散层、球墨铸铁层组成。
It is researched the preparation of ceramic layer on the surface of M5 zirconium alloy by high-frequency induction oxidation process in active flow oxygen medium and in dry air.
在活性氧流动介质和干空气中，用高频感应氧化工艺在M5锆合金表面生成氧化锆陶瓷膜进行了研究。
If there is a large difference in the coefficient of expansion, there will be cracks in the ceramic layer or the phenomenon of exploding porcelain in the alternating heat and cold.
如果膨胀系数相差较大，在冷热交替的时候就会出现瓷层裂纹或爆瓷现象。
The firing contraction percentage value of the internal conductor is 10-90% relative to the firing contraction percentage value of the magnetic body ceramic layer (ferrite main body).
内部导体的烧成收缩率的值、相对于磁性体陶瓷层（铁氧体层）的烧成收缩率的值为10至90％的范围。
The results show that the stress in ceramic layer is mainly for lateral compressive one, and its maximal stress occurs in the place that is at the distance of 1/3 thickness from coating surface;
结果表明，陶瓷层内的残余应力主要表现为横向压缩应力，且最大值位于距陶瓷层表面1/3厚度处；
At the same time, double compound layer which was composed of metal transition layer with high hardness and ceramic layer improved the service life and safe stability of the composite pipes greatly.
同时，高硬度的金属过渡层与陶瓷层组成的双层复合结构使复合管的使用寿命和安全稳定性显著提高。
The GE process for making a transducer begins by spreading onto the print table a thin layer of ceramic slurry containing a light-sensitive polymer.
通用电气制造商(GE)制造换能器的过程是首先在打印台面喷撒一薄层含有光敏聚合物的陶瓷浆料。
A thin layer of semiconductor is deposited on a ceramic base.
在陶瓷基片上淀积了薄薄一层半导体。
A layer of ceramic film can be grown on ti alloy by the micro plasma oxidation.
在钛合金表面用微等离子体氧化能产生一层陶瓷膜。
Lining a layer of ceramic pads at the bottom of hearth can directly influence the slag-pig solidified layer.
在炉缸底部炭砖热面筑砌一层陶瓷垫，直接影响炉底渣铁凝固层的形成。
A layer of ceramic film is produced by micro plasma oxidation on the surface of ti alloy in order to improve its corrosion resistant property.
为提高钛合金的耐腐蚀性能，在其表面用微等离子体氧化法生长一层陶瓷膜。
It was introduced how to change single layer ceramic disc components with leads into chip components on the basis of single layer ceramic discs.
介绍了在单层陶瓷圆片的基础上实现单层陶瓷圆片带引线元件的片式化。
The B4C ceramic particle not melted in cladding layer.
熔覆层中出现未熔的B4C陶瓷颗粒。
The problem may be solved by using the gradient transitional layer, within which the composition and microstructure can vary gradiently, as a weld interlayer between ceramic and metal.
在陶瓷与金属间用一定厚度的成分和结构呈梯度变化的梯度过渡层作为连接二者的焊缝层，是解决陶瓷与金属连接时所存在问题的较好措施之一。
Residue stress in the ceramic chip of the composite tappet rod may be reduced by intermediate layer of soldered connection and by decreasing thickness of ceramic chip.
钎焊过渡层和减薄陶瓷块厚度可降低钎焊复合挺柱中陶瓷块的残余应力。
The results show that a series smooth and dense brown ceramic films layer can be obtained by using these waveforms.
结果表明：采用三种不同波形均可在镁合金表面得到一层光滑致密褐色系列的类陶瓷膜。
The second layer, without armor, receives directly the ceramic pieces.
第二层，没有装甲，直接收到的陶瓷碎片。
The second layer, without armor, receives directly the ceramic pieces.
第二层，没有装甲，直接收到的陶瓷碎片。
应用推荐