The foundation elements were made from large local rocks cast in place.
该基础元素是大块当地岩石在适当位置铸造组成的。
To treat the uneven settlement of ground by using cast in place pile underpinning is a practical and effective technique.
采用灌注桩托换技术处理地基的不均匀沉降是一种实用有效的方法。
Based upon the construction technology of cast in place bored piles the quality control of every procedure is mainly discussed.
根据钻孔灌注桩的施工工艺,主要论述了每道工序的质量控制点。
The urethane liner is cast in place to form a continuous liner throughout the entire body, chest, packing chamber and flange face area.
氨基甲酸乙酯衬垫采用定点浇铸工艺,在整个阀体、阀腔、填料腔和法兰面区域表面形成全面连续的覆盖衬垫。
This paper introduces the cast in place cantilever construction technology used in uncontinous box beam of the Hanchuan Hanjiang River Bridge.
介绍汉川汉江公路大桥非连续段箱梁的悬臂现浇施工技术,可供有关工程技术人员参考。
The technology of filling by high strength expanded cement in the reinforcement process adopting cast in place reinforced concrete is introduced.
采用预制钢筋混凝土管进行加固时,如何利用高强膨胀水泥进行填充。
This paper analyses some kinds of fissures in cast in place reinforced concrete beams and slabs, and puts up several methods for dealing with the fissures.
本文对现浇钢筋混凝土梁、板的几种裂缝产生的原因进行了分析,并提出处理方法。
The whole procedure of design and construction of boring cast in place concrete pile under complicated geological condition in HuBei province is introduced.
介绍了湖北某工程在复杂地质条件下钻孔灌注桩设计与施工的全过程。
An introduction is given to key construction flow, quality detection and quality control of bracket method for large span prestressed cantilever box beam cast in place.
结合工程实例,介绍大跨度预应力现浇箱梁托架法施工的关键工序、质量检测及控制。
This paper deals with materials, design parameters. construction batch strength and design of mix proportion for underwater concrete cast in a major diameter cast in place pile.
论述大直径灌注桩水下浇注混凝土时的材料选择、设计参数选择、施工配制强度及配合比设计。
Gallery Three – the "black box" – has only a hint of natural light, integrated into and through the iris of the sandblasted eye pattern on the exterior cast in place concrete walls.
廊三- “黑盒子” -只是一个提示的自然光线,并通过纳入地方虹膜的外部投的格局喷砂眼睛混凝土墙。
The cracking causes of cast in place concrete slab was discussed on three aspects: concrete materials, concrete slab construction and design. And some corresponding precautions are suggested.
从混凝土材料本身、施工、设计三个方面分析了混凝土现浇楼盖产生裂缝的原因,并提出了相应的预防控制措施。
It is a new form of hollow floor slab cast in place with thin plastic box being used as inner formwork and has the advantages of easy construction, high hollowness and good economical benefit.
蜂窝式现浇混凝土空心楼板使用薄壁塑料盒作为内模,是一种新型的现浇空心楼板形式,具有施工简单、空心率大、经济效益好等优点。
Through the comparison of cast in place concrete plate and precast hollow plate the advantages of cast in place concrete plate and the disadvantages of using precast hollow plate are pointed out.
在民用住宅砖混结构中通过现浇混凝土现浇板与预制空心板的对比,指出了现浇混凝土板种种优点和采用预制空心板在结构上和使用上的诸多弊端。
Movement and pressure of groundwater have great effects on quality of cast-in-place piles in special hydrogeological cases.
在特殊的水文地质条件下,地下水的运动及压力对灌注桩的质量影响十分显著。
For the exterior cladding, the architect employed a range of materials, including cedar, natural stucco, steel and glass. Board-formed and cast-in-place concrete was also utilised.
对于建筑的外部表面,建筑师选择一系列的材料,比如雪松、自然灰泥、钢材和玻璃作为覆盖层。另外,还采用了加工成板状的和现场浇筑的混凝土。
The successful alternative was the cast-in-place segmental prestressed concrete box girder.
最后采用的方案是分段现浇的预应力混凝土箱形梁。
The successful alternative was the cast - in - place segmental prestressed concrete box girder.
最后采用的方案是分段现浇的预应力混凝土箱形梁。
The paper introduces the influence of mud proportion on the excavated hole, the hole cleamng of the cast-in-place and concreting.
介绍了泥浆比重对钻孔灌注桩成孔、清孔及混凝土灌注的影响,并提出相应的技术措施。
The pile strain of AM bulb cast-in-place pile is tested by high precision sliding micrometer, which can have high precision and reliable testing results.
采用高精度滑动测微计测试AM扩底桩在各级荷载下的桩身应变,测试精度高,测试结果可靠。
The processing portions of the building are constructed of cast-in-place concrete with administrative offices framed in steel.
建筑的加工部分是钢结构的钢筋混凝土框架。
These measures are effective in construction of high quality main structure of cast-in-place framework house when we strengthen control the quality problem in our initiative.
施工过程中如果能加强对这些质量问题的主动控制,对现浇框架房屋主体结构的质量创优会有立竿见影的效果。
The cast-in-place pile is in general engineering deep foundation forms, pile quality plays a vital role to construction safety.
钻孔灌注桩是工程中常用的深基础形式,其成桩质量对工程安全有着至关重要的作用。
The article analyzes some kinds of quality defects of cast-in-place hydraulic concrete, its harms, formation causes and puts forward concrete prevention measures.
对现浇水工混凝土质量缺陷的几种类型及其危害、产生原因进行分析并提出了具体的预防措施。
Combining with engineering practice, this paper states characteristics and usage range of cast - in - place hollow floor, introduces its construction key points and economy benefit.
本文结合工程实例,论述现浇空心板的特点及适用范围,并介绍了现浇空心板施工程序要点及经济效益。
Beginning with several problems of cast-in-place construction management, this paper states the necessity of science management.
本文从现场施工管理的几个问题入手,阐明了科学管理的必要性。
Combined with the actual work, the structure crack causes of cast-in-place reinforced concrete and prevention measures are discussed.
结合工作实际,针对现浇钢筋混凝土结构裂缝的产生原因与防治方法进行了论述。
The structure is based on the cast-in-place pile pier, and three of the piers and pile foundation were calculated and checked.
下部结构采用以钻孔灌注桩为基础的三墩柱,并分别对桥墩和桩基础进行了计算和验算。
Then calculating methods on construction camber of cast-in-place beam scaffold and setting methods are introduced.
接着介绍了现浇梁支架的施工预拱度计算方法及设置方法。
Then calculating methods on construction camber of cast-in-place beam scaffold and setting methods are introduced.
接着介绍了现浇梁支架的施工预拱度计算方法及设置方法。
应用推荐