Delegate business processing (by using the Model service used by the Struts application).
委派业务处理(采用由Struts应用程序所使用的模型服务)。
By using the model, we gained the change rules of red soil pore structure during rainfall.
对模型的应用表明红壤孔隙结构在土壤侵蚀过程中存在一定的变化规律。
Satisfactory results could be obtained by using the model proposed here to classify passive sonar targets.
本模型被用于被动声纳目标分类，取得了较好的效果。
The possible orientations in solid C60 were studied by using the model of classical molecular interaction.
本文利用分子间相互作用势模型研究了固体C_（60）的各种可能的取向状态。
The end carbon content and temperature were controlled, and the chromium yield was increased by using the model.
通过该模型可控制终点碳和温度以及提高铬的回收率。
By using the model plant Arabidopsis, it was discovered that the isochorismate approach is the major source of SA.
通过对模式植物拟南芥的研究发现，异分支酸合成酶途径是合成SA的主要途径。
By using the model, the effects of tempering degree and glass thickness, as well as the crack growths are discussed.
通过该模型，对钢化程度、玻璃厚度以及裂纹尺寸对玻璃强度和裂纹扩展的影响进行了讨论。
In forecasting dynamic economic processes by using the model with steady parameters, large errors are often discovered.
对于发生变化的动态经济过程，应用定常参数模型进行预测时误差较大。
The effect of various factors on the joint stiffness is also simulated by using the model, which shows reasonable results.
文中还应用模型对各种因素对接头刚度的影响规律进行了模拟 ，所得结果是合理的。
The paper makes a solution to the sharing of scientific and technological resources by using the model of the social network.
提出通过构建科技资源共享中的人际网络模型来拓展科技资源共享人际网络模型渠道；
A nonlinear characteristic of taper leaf springs is presented by using the model of curved beam and the principle of virtual force.
通过建立钢板弹簧的曲梁模型，应用虚力原理求解位移，得到了变截面钢板弹簧刚度的几何非线性特性。
The result of application shows that the simulation of soil water dynamics and evapotranspiration by using the model has high precision.
经初步应用结果表明，该模型模拟无地下水补给条件下玉米田土壤水分动态具有较高的精度。
An architect can also create a class or information model by using the model synchronization feature in IBM Rational Rapid Developer (see Figure 2).
架构师也可以通过使用IBMRationalRapidDeveloper中的模型同步特性(见图2)来创建类和信息模型。
Both mechanism and its influencing factors are investigated while a series numerical calculation is implemented by using the model established.
用所建立的模型进行了微生物调剖的机理及影响因素的研究，进行了一系列的计算。
The technology and method making safety and hygiene evaluation by using the model of safety inspection table in Wushan Copper Mine are introduced.
介绍了武山铜矿用安全检查表的模式进行安全卫生评价的技术和方法。
The osmotic coefficients values experimentally determined and those calculated by using the model with the parameters are in reasonable agreement.
用该模型计算的渗透系数值与实验结果取得合理的一致。
The osmotic coefficients values determined experimentally and these calculated by using the model with the parameters are in reasonable agreement.
用该模型计算的渗透系数值与实验结果取得合理的一致。
In this paper, the comprehensive evaluation of geological conditions of mineral resources is made by using the model of fuzzy comprehensive evaluation.
本文采用模糊综合评判模型，对矿产资源的地质条件进行了综合评价。
This paper presents the results of chemical flooding simulation for different situations by using the model established in the preceding part (No. 1,1988).
本文利用在上部分（《石油学报》1988第一期）中建立的化学驱组分模型，对多种情况下的化学驱油算例进行了模拟计算。
The top response of the model pile was calculated by using the model and the correctness of the model was verified by reference of the measurement waveform.
用建立的数学模型求出了某试验桩的桩顶响应，以实测波形为参照，验证了理论模型的正确性。
A quasi static approach is presented for ductile tearing test of double cantilever beam specimen by using the model of elastic beam on elaso plastic foundation.
对典型结构钢的双悬臂梁试件的中低速韧性撕裂的实验进行了准静态模拟。
By using the model and detailed chemical kinetics of Dimethyl Ether(DME)oxidation, HCCI combustion of DME in a diesel engine is numerically simulated and tested.
采用该模型并利用二甲醚氧化的详细化学反应动力学机理，对二甲醚燃料在柴油机上的均质压缩燃烧HCCI进行了模拟计算和试验研究。
After an actual rolling process of 2050 mill was simulated by using the model, evolution laws of strain field, temperature field and microstructure were analyzed.
运用该模型对2050现场实际轧制过程进行模拟计算，分析了轧制过程轧件变形场、温度场及显微组织的演变规律。
The results show that the main parameters can be determined by using the model and method in this paper, and the stiffness influenced by each dimension can be obtained.
根据提出的优化模型及方法，即可确定机架主要尺寸，并可以得出每个尺寸对机架刚度的影响。
Based on the tracking control theory of linear system, a braking scheme to track a prescribed trajectory is designed by using the model reference approach of linear system.
基于线性系统跟踪控制理论，利用线性系统中的模型参考跟踪控制的方法设计了一种对指定轨迹进行跟踪的制动方案。
On this basis, the major factors affecting depth of fragmentation and operation cycle of the furnace are analyzed by using the model and Suggestions on operation are stated.
在此基础上，运用模型对影响裂解深度和炉子运行周期的主要因素进行了分析，提出了相应的操作建议。
By using the model in real simulator, the operation status of axial-flow fans can be analysed and the results are of specified value to the operation of axial-flow fans in power plants.
在实际仿真机上应用该模型，可以分析出两台轴流风机并列运行时的喘振工况，对现场轴流风机的运行具有一定的指导作用。
A model of heat transfer from smoke to exterior of tray is established based on principle of energy balance. The heat transfer with different gas components is calculated by using the model.
根据能量平衡原理，建立烟气向塔盘外壁的传热模型，并针对煤气成分变化的不同情况进行计算。
Methods the effect factors of the steady producing for single gas well production was discussed by using the model of material balance with compensating as well as the parameters of the model.
方法采用具有补给的物质平衡模型确定气井单井稳产水平，探讨影响单井稳产水平的因素及其在模型中的反映。
Methods the effect factors of the steady producing for single gas well production was discussed by using the model of material balance with compensating as well as the parameters of the model.
方法采用具有补给的物质平衡模型确定气井单井稳产水平，探讨影响单井稳产水平的因素及其在模型中的反映。
应用推荐