• The weld can be divided into four types: butt weld, fillet weld, plug weld and end weld.

    焊缝可分为对接焊缝、角焊缝、塞焊缝和端接焊缝四种。

    youdao

  • PE butt weld was tested by ultrasonic.

    采用超声波对PE管对接焊缝进行检测。

    youdao

  • Reducing long radius butt weld elbows shall be kept to a minimum.

    应尽量少用长径异径对焊弯头。

    youdao

  • Weld the outer side member with a full butt weld under shielding gas.

    用气体保护全对接焊,焊接外侧梁。

    youdao

  • The box beam was one of the most important stress parts of the crane which required high quality butt weld.

    箱形梁是集装箱吊具的重要受力部件,对焊接质量要求高。

    youdao

  • Buckling of thin plate due to butt weld was investigated using inherent strain method as an equivalent load.

    提出了基于固有应变对接薄板失稳分析的基本方程。

    youdao

  • By the analysis and measures above, it improves the test quality of the process piping butt weld effectively.

    通过以上分析和采取的措施,能有效提高工艺管道对接焊缝超声波检测的质量。

    youdao

  • In this paper, buckling of thin plate due to butt weld is investigated using inherent strain method as an equivalent load.

    提出了基于固有应变对接薄板失稳分析的基本方程。

    youdao

  • Weld-shape(butt weld width, size of fillet weld)is an indicator of weld features and it also is an important factor of quality welding.

    焊缝尺寸 (如对接焊缝的焊缝宽度、角焊缝的焊角尺寸等 )是表示焊缝形状特征的指标 ,是影响焊缝质量的重要因素之一。

    youdao

  • Widely used for butt weld joint between carbon steel, alloy steel, non-ferrous pipes, bars and profiled materials or butt weld between heterogenous metals.

    广泛用于碳钢、合金钢、有色金属的管、棒、板、型材之间的对焊或异类金属之间的对焊。

    youdao

  • This article introduced the experiment of residual stress in flat tubeplate head of large scale fuel boiler that was manufactured by cold rotary extruding and butt weld.

    本文介绍了大型燃油锅炉经拼板焊接和冷旋压加工制造而成的平管板封头残余应力试验。

    youdao

  • Considering the characteristics of the process piping butt weld, this article analyzes the welding methods, the welding positions and the defects which are easily produced.

    针对工艺管道对接焊缝的特点,对焊接方法、焊接位置及易产生的缺陷进行了分析。

    youdao

  • And the welding connecting of them are advised to use slope butt weld that are fully welded, but when the double-sided fillet weld is used, they should be design on equal strength.

    节点中的焊接宜采用完全焊透的坡口对接焊缝连接,当采用双面角焊缝连接时,可按等强设计。

    youdao

  • The research focuses on the defect equivalent analytical methods in building steel structure butt weld fusion and the effects of non-crack-type defects on the normal use of butt weld fusion.

    本课题研究了建筑钢结构熔透对接焊缝中缺陷当量的分析方法和非裂纹类缺陷对焊缝正常使用的影响。

    youdao

  • All valves are to be supplied with butt-weld end connections as specified.

    所有截止阀按要求为对焊端连接。

    youdao

  • These are significantly better than those achievable with the alternative butt-weld technique.

    这些性能显著地优于对缝焊接方法所能达到的性能。

    youdao

  • Experimental results also indicate that selecting appropriate process parameters can realize the butt-weld for the 0.85 mm thick Invar sheets in good welding modality.

    合理匹配工艺参数能够实现0.85mm厚度薄板的对焊,并且获得形貌良好的焊缝。

    youdao

  • Experimental results also indicate that selecting appropriate process parameters can realize the butt-weld for the 0.85 mm thick Invar sheets in good welding modality.

    合理匹配工艺参数能够实现0.85mm厚度薄板的对焊,并且获得形貌良好的焊缝。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定