• 高速面铣刀及其参数化设计系统的研制,为进一步开展高速刀具产品化的研究奠定了坚实的基础。

    The development of high speed milling cutter and parametric design system provide firm base for the further research of high speed cutter product.

    youdao

  • 为降低切削区温度、防止刀具的氧化磨损,提出在低温氮气射流条件下进行钛合金的高速铣削加工。

    The use of cryogenic nitrogen gas jet to reduce the temperature of cutting zone and to avoid oxidation wear of tool in high speed milling titanium alloy was presented.

    youdao

  • 综述了在高速切削中,根据不同的被加工材料,如何选择刀具材料问题。

    The problem of tool material selection in high speed machining based on the machined materials is overviewed.

    youdao

  • 刀具轨迹生成方法是模具高速加工数控编程的基础和关键。

    Tool track creation method is the base and key of mold high-speed milling NC program.

    youdao

  • 本文对高速镗新工艺的试验装置、刀具及切削参数进行了试验研究。

    In this paper, the testing device of high speed boring technique, cutting tools and cutting parameters were tested and studied.

    youdao

  • 本文从机床、刀具、工件、工艺等方面讨论了高速切削的技术开发情况。

    This paper discusses the development of the high-speed cutting technology in respect to the machine tool, cutting tool, workpiece and process.

    youdao

  • 针对高速旋转圆盘刀具薄刀片实际工作时存在的横向振动问题,应用有限元方法及实验测量进行了研究。

    The lateral vibration of the high-speed rotating disk cutter slice blade was studied by the finite element analysis and the experimental measurement.

    youdao

  • 因此,刀具磨损的监测对高速铣削加工技术的推广应用有重要的实际意义。

    Therefore, the tool wear monitoring had important practical significance for high speed milling machining technology application.

    youdao

  • 金刚石薄膜涂层刀具高速干切削硅铝合金可提高生产率。

    The productivity of cutting Si-Al alloy can be greatly improved by using cutter coated with diamond film in high-speed dry cutting.

    youdao

  • 高速切削是先进制造技术中最重要的加工工艺之一,而切削刀具是实现这一工艺的关键。

    The high speed cutting is one of the most important cutting technology in advanced manufacturing technology and cutting tools are the key factor for the technology.

    youdao

  • 高速、高效、高精度的数控机床除了对刀具有相应的要求外,对刀具夹持系统也有很高的要求。

    In addition to high demand on tools, the high-speed, -efficiency and -accuracy nc machine tool also has high requirement on tool clamping system.

    youdao

  • 对金属陶瓷刀具高速干切削45钢时的磨损情况进行了试验和分析。

    The test and analysis for wear of cermet cutter during high-speed dry cutting 45 steel are carried out.

    youdao

  • 是高速、重切削以及难加工材料的最佳助手,可明显提高加工质量,延长刀具寿命,提高生产效率。

    High speed, heavy cutting and difficult processing materials in the best assistants, can significantly improve the processing quality, prolong tool life, improve the production efficiency.

    youdao

  • 高速切削时,刀具具有不同于普通切削的失效机理,需要新的理论和方法来进行研究。

    As failure mechanisms of cutting tools in HSM is different with those in conventional machining, new theory and research method should be presented.

    youdao

  • 利用高功率CO_2气体激光器对高速钢刀具前、后面进行YG6表面涂敷;

    The paper deals with YG6 coating on fore-and-aft face of high speed steel tool with high power CO_2laser.

    youdao

  • 建立了DMU-70V五轴数控高速加工中心主轴-夹具-刀具系统的有限元模型,并利用动态测试的方法对有限元计算结果进行验证;

    The FEM(finite element method) of the main shaftclamping apparatus-cutter system for DMU-70V NC high speed machining was built, and the results of the FEM were validated using dynamic test.

    youdao

  • 硬质相颗粒的脱落是干式高速车铣D60钢时金属陶瓷刀具磨损的主要原因。

    The main reason of ceramic tool Wearing is coming off the hard grain during the dry cutting of steel D60.

    youdao

  • 结合剪切面及前刀面接触区的平均温度和切削热解析法,研究了高速切削中切削热在切屑、工件和刀具部分的量化分配规律。

    Also, combining theoretical analysis method of cutting temperature with the FEA, the distribution of cutting heat in components of chip, workpiece and tool was researched.

    youdao

  • 文中论述了高速干切削机床的结构特点和性能要求,对干切削刀具材料和涂层技术等方面也进行了论述。

    In this paper, the characteristics of the structure and desired performance of the machine tools are discussed in detail while the cutting tool material and its coating technology are also introduced.

    youdao

  • 该系统用直线电机,在计算机的控制下,刀具进给伺服机构响应速度快,定位精度高,能高速、高精度地加工工件。

    In this system, linear motor is applied, and under the control of computer, fast response of servo drive for tool feed, high positioning accuracy and high precision workpiece are achieved.

    youdao

  • 第四章研制了计算机高速数控雕铣系统控制软件,包括控制软件结构、主要管理功能、刀具补偿功能、插补功能的分析和实现。

    System software is designed and programmed in chapter 4, including the analyses and researches on software structure, module of vital manage, module of tool compensation and module of interpolation.

    youdao

  • 刀具破损的主要形式为高速钢刀具切削刃塑性变形和陶瓷刀具的崩刃。

    The modes of tool damage include plastic deformation on cutting edge of high-speed steel tool and tipping of ceramics tool.

    youdao

  • 研究的结果表明,经处理过的高速钢刀具表层其减摩性、耐磨性和耐热性均有所提高。

    The result of this research shows that the antifriction capability, wear and heat resistance of the layer of the treated cutting tool have been improved.

    youdao

  • 对硬质合金整体立铣刀高速铣削加工航空铝合金时的刀具磨损形态及其磨损机理进行了观察和分析。

    The wear patterns and wear mechanisms of solid cemented carbide are analyzed in high-speed milling of aluminum alloy.

    youdao

  • 高速切削刀具技术则是实现高速切削的关键技术之一。

    The high speed cutting tool technology is one of the key technologies to achieve :he high speed cutting.

    youdao

  • 高速切削加工作为一种新的切削理念,迄今为止,还没有系统的高速切削刀具材料的选择方案,也没有完整的加工参数可供选择。

    As a new cutting idea, the HSM does not have the systemic choice plan of cutting tool material in HSM, and also does not have the integrated processing parameter to be chosen until now.

    youdao

  • 高速切削时,氧化和扩散磨损加速了刀具的失效进程。

    Oxidation and diffusion wears accelerated failing progress of cermet cutters at higher cutting speeds.

    youdao

  • 高速切削时主轴转速很高,加工精度、刀具寿命和生产率受到影响。

    In high-speed cutting, the machining accuracy, cutting life and productivity are influenced by the high rotational speed of spindle.

    youdao

  • 结合生产,对s- 136淬硬钢高速铣削工艺的刀具选择、冷却方式、进给路线进行了分析。

    Choice of cutting tool, cooling manner and feed path in high speed milling S-136 hardened stainless tool steel were analyzed, based on a S-136 die production.

    youdao

  • 结合生产,对s- 136淬硬钢高速铣削工艺的刀具选择、冷却方式、进给路线进行了分析。

    Choice of cutting tool, cooling manner and feed path in high speed milling S-136 hardened stainless tool steel were analyzed, based on a S-136 die production.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定