大楼用闪光的金属表层完全包覆，随着光线变幻色彩，整体很像一个大铸块。
Entirely clad with an iridescent metallic skin, the building changes colour with the light and, as a whole, greatly resembles a large ingot.
讨论了钢包、中间包及连铸结晶器所用渣相对夹杂物的吸附，对钢水的氧化，以及保护浇注的效果。
Absorption of inclusions to slag, steel reoxidation by slag, and protective effect of the slag at ladle, continuous tundish and nold are discussed.
针对宝钢六流连铸中间包等离子加热区域温度积聚严重的现象，提出了底吹气的解决方法。
The bottom blowing solution was put forward to solve the temperature accumulation in the plasma heating zone in a six-strand tundish.
通过水模试验研究了涡流控流槽对连铸中间包流体流动的影响。
The influence of eddying flow control trough on flowing liquid in tundish is researched through water simulating test.
钢包内衬在使用至中、后期进行喷补维护，在延长包龄、适应全连铸快节奏生产需求的同时，降低了钢包内衬耐材消耗。
Meanwhile, gunned lining can reduce the refractory consumption on ladle liner and prolong the life span of the ladle and adapt to the fast speed CC production.
采用新材料铸轧辊辊套提高了带坯通过量，分析了影响板形的各种因素，解决了铸轧生产中的鼓包问题。
Productivity is increased by using new material cast roll shell. The factors influencing shape are analysed. The problems at work are discovered.
文章对唐钢连铸中间包钢水等离子加热技术进行了较系统的论述，研究了中间包结构和炉渣等对加热效果的影响。
This paper systematically discusses the technology of plasma tunish heating molten steel in tunish and also the influence of tunish structure and the slag on heating efficiency.
介绍了连铸中间包透气上水口的性能和种类及连铸工艺对透气上水口性能的要求。
Property and variety of purging upper nozzle and the requirement of continuous casting process for the nozzle were introduced.
用正交试验方法确定包芯线的成分，使其在技术方面和经济方面能较好地满足球铁铸管生产的要求。
The technical and economical requirements for the cored wire used in nodular iron pipe production can be satisfactorily met by adopting orthogonal experimental method to determine its composition.
介绍了连铸中间包定径水口快速更换与中间包长寿技术。
Technologies of rapid replacement of sizing nozzle and longevity of continuous casting tundish were presented.
在离心铸管浇注过程中，扇形包翻转速度稳定与否是影响铸管成形质量的主要因素。
In the process of centrifugal casting, the stable overturn speed of the sector ladle is the main reason to influence the quality of casting pipes.
本文主要介绍了连铸中间包内控流装置的几种形式，并对其作用与应用状况做了综述。
This paper mainly introduces some flow-control devices in continuous casting tundishes and summarizes their effects and application.
通过水力学模拟实验，优化了模铸连浇中间包控流装置。
The flow control devices of tundish for ingot casting has been optimized through hydraulics simulated experiment.
为减少不锈钢连铸坯中夹杂物的数量，开展了不锈钢板坯连铸中包水模实验。
In order to reduce the inclusion quantity in the stainless steel slab, water-modeling experiment of stainless steel slab continuous casting tundish is launched.
在多次试验研究的基础上开发出了YJB—2碱性微碳中间包覆盖剂满足了二钢连铸生产品种钢的需要。
Based on the experiments, YJB-2 basic micro-carbon covering agent for mid-ladle is developed, which satisfies the continuous casting production requirement for special steel in No. 2 steel plant.
讨论了小方坯连铸中间包用耐火材料的部分品种及性能要求，为小方坯连铸中间包用耐火材料的选择提供了参考。
Some kinds of refractory and their properties for tundish in small billet con casting are discussed and selection reference offered.
从中间包绝热板的配方、制造技术和装砌等方面采取改进措施，可有效减少铸坯皮下气泡。
Some improvement in insulating board composition, in shaping process and lining technology can effectively reduce the skin hole.
前言： 通过三流T型连铸中间包物理模拟实验，研究了直挡墙、V型挡墙及其与抑湍器组合控流装置对中间包流动特性的影响。
The effects of vertical and "V" type baffles as well as turbulence inhibitor with baffle on melt flow behavior were investigated in a three-strand T type tundish with physical modeling.
依据相似原理，在实验室建立了一定相似比的薄板坯连铸中间包物理模型。
By using the similar principles, a physical model of thin-slab tundish with a certain scale was established in lab.
提出了一种制备包覆双金属复合材料的新工艺，即充芯连铸法制备包覆双金属复合材料的工艺。
The paper introduces a new process that is continuous core-filling casting(CFC). The fabrication of bimetal composites of copper cladding aluminum is researched.
中间包温度是影响连铸板坯凝固位置的重要因素之一。
The tundish temperature is one of the factors which seriously affect the solidification position of continuous casting slab.
用热型连铸工艺实现了铝合金包铸光学纤维。
The Ohno Continuous Casting technique has been successfully applied to the cast in process of optical fibres to a al Mg alloy wire.
一种连铸塞棒控流水口，涉及金属连续铸造设备中的中间包浇注喷嘴。
A continuous casting stopper flux controlling mouth relates to a tundish casting nozzle in a metal continuous casting equipment.
针对攀钢六流大方坯连铸中间包，采用等温和非等温物理模拟的研究方法，研究了钢水在中间包内的流动规律。
The flow pattern of molten steel in tundish of the 6-strand bloom caster at PZH steel were investigated by physical simulation with isothermal and non-isothermal model.
本实用新型具有稳定铸 坯质量，提高中间包使用寿命，具有广泛的推广前景等特点。
The utility model has the advantages of stable blank casting quality, longer service life of the tundish, wide popularization prospect, etc.
本发明用于钢铁冶炼中连铸中间包的工作衬涂料，具有净化钢水、抗冲刷、耐侵蚀和使用寿命长的优点。
It is applied to working lining paint of continuous casting tundish in steel smelting, having advantages of purifying molten steel, resisting washing, resisting corrosion and long service life.
本实用新型涉及一种挡渣球投掷装置，特别适用于炼钢转炉、连铸中间包等的挡渣球投入工艺。
The utility model relates to a skimming ball throwing device, which is especially suitable for skimming ball inputting process of steel converters, continuous casting tundish, etc.
本实用新型涉及冶金连铸技术，尤其涉及中间包水口预热装置。
The utility model relates to the metallurgy continuous casting technology, in particular to a tundish nozzle preheating equipment.
文摘：通过水力学模拟六流连铸中间包后发现，原设计的中间包在夹杂物的上浮及温度的均匀性方面还存在不足，不能很好地满足生产工艺要求。
Abstract: Water modeling of the six-strand caster tundish shows that the original design of the tundish can not meet the technical requirements for inclusion floatation and temperature homogenization.
文摘：通过水力学模拟六流连铸中间包后发现，原设计的中间包在夹杂物的上浮及温度的均匀性方面还存在不足，不能很好地满足生产工艺要求。
Abstract: Water modeling of the six-strand caster tundish shows that the original design of the tundish can not meet the technical requirements for inclusion floatation and temperature homogenization.
应用推荐