底盘是由碳纤维与铝蜂窝状复合材料的合金。
The chassis is constructed with a combination of carbon-fiber and aluminum honeycomb materials.
但是也有一个很大的缺点：当铝被撞击时，你会看到一个凹陷，但是复合材料看似能够变回原来的外表，内部却已经受损。
When aluminum is hit, you can see a dent. Composites, though, spring back to the original shape, which could hide internal damage.
“787梦想”以50%复合材料和碳素纤维复合物制造，这种材质比传统铝质材料更轻更耐用。
The Dreamliner is made of 50% composite materials, carbon-fiber enforced polymers that are both lighter and more durable than traditional aluminum.
飞机制造商已不再使用铝，转而使用高级复合材料。
Airplane manufacturers have been changing over from aluminum to advanced composite materials.
飞机生产厂家一直在使用高级复合材料取代铝。
Airplane manufacturers have been changing over from aluminum to advanced composite materials.
实验结果表明，热处理能改善铸态下制得的铝硅基复合材料显微组织形态。
The results have shown that heat treatment can improve the microstructure of the Al-Si base composite manufactured under case condition.
研究制造出单向不锈钢纤维及钨纤维增强的铝基复合材料。
The aluminum-based composite, which was reinforced with stainless steel fibres and tungsten fibres, was developed.
并使用这一方法测试了玻璃一铝复合材料的界面应力。
The interface stresses in the glass-aluminium composite have been measured by using this method.
陶瓷梯度增强铝基复合材料是大功率发动机活塞理想增强材料。
Gradient Aluminum matrix composite reinforced by ceramic fibers is an ideal reinforcement material for powerful engine pistons.
采用平面应变有限元方法研究了晶须转动对晶须增强铝基复合材料热压缩变形行为的影响。
The effect of the whisker rotation on the hot compressive deformation behavior of the whisker reinforced aluminum matrix composite is investigated by the plane strain finite element method.
介绍了一种新的制备颗粒增强铝基复合材料的方法。
A new way that made grain reinforced aluminium matrix composite is introduced.
实型铸造法具有制作铝-石墨粒子复合材料的潜力。
The full mould process had the potential to produce aluminium -graphite particle composite castings.
利用原子力显微镜观察了纯铝基复合材料早期腐蚀过程中表面形貌的变化特征。
The characters of surface morphology of pure aluminum matrix composites were observed by atomic force microscope (AFM) during the early stages of corrosion.
本文着重研究了液态浸渗法制备纤维增强镁、铝基复合材料的浸渗工艺。
Infiltration process of fiber reinforced magnesium aluminium matrix composites made by liquid infiltration was mainly studied in the paper.
将激光焊接技术用于碳化硅颗粒增强铝基复合材料的焊接。
Laser Induced Reaction Welding (LIRW) technique is employed for SiC particulate reinforced Al based composite to produce joints.
作者还讨论了铝基原位复合材料在民用领域的潜在应用前景。
Finally, this article discusses the potential applications of al matrix insitu composites in the field of civil products industry.
并分析了不同颗粒度碳化硅增强铝基复合材料所适用的刀具。
The cutting tools that are applicable to the al matrix composites reinforced by different size SiC particles are also analysed.
所得铝基复合材料组织均匀致密、性能稳定。
The obtained aluminium matrix composite is uniform and dense in microstructure and stable in property.
介绍了铝基复合材料的基本性能及其应用情况，重点总结了近几年关于铝基复合材料的主要研究成果以及热点问题，指出了铝基复合材料的发展趋势。
The fundamental property and application field of aluminum matrix composite were briefly introduced, the major research findings and focus problems in recent years were summarized.
要很好地应用铝基复合材料，通常取决于这种材料本身与其它金属材料的连接能力。
However, good use of these composites will often depend upon their abilities to be joined both to themselves and to other materials.
本文着重介绍了颗粒增强铝基复合材料的性能及其成型加工特性。
The performance and machining characteristic of grain reinforced aluminium composites are introduced mainly in this paper.
对颗粒增强铝基复合材料的制备工艺作了综述，指出了各种工艺的优缺点，并对其未来发展前景进行了预测。
The fabrication techniques of particle reinforced alumina alloy composites were summarized, the technical advantages and shortcomings were presented, and the future developments were also discussed.
用原位合成法制备了纳米颗粒增强铝基复合材料，研究了复合材料微观组织、室温拉伸强度、塑性，并与基体合金进行比较。
Microstructure, plasticity and mechanical properties at room temperature of the nano particle reinforcement aluminum matrix composites fabricated by in situ reaction and matrix alloy were studied.
根据凝固过程中的守恒原理，建立了铝基复合材料凝固过程的数学模型。
The solidification model of aluminum alloy composites was established according to the law of conservation.
结果表明，随着基体中硅含量的增加，复合材料的磨损率大大降低，另外，致密化处理可进一步改善铝基复合材料的耐磨性能。
It was found that the wear rate evidently decreased with the increase of silicon content. Densification treatment could further improve the wear resistance of the aluminum based composites.
利用自行设计的一套净成形真空液相压渗工艺装置制备了净成形碳纤维增强铝基复合材料。
A near net shaped carbon fiber reinforced Al composite was prepared by a new vacuum squeeze casting process.
拌铸造法制备铝基复合材料的关键问题是搅拌浆的设计和搅拌参数选择。
The key problem of stirring cast is the design of stirring oar and the selection of stirring parameter.
本文在国产氧化铝短纤维基础上，研究了氧化铝短纤维增强铝硅合金复合材料的凝固组织。
In this paper, the solidifying structure of alumina short fiber reinforced aluminum-silicon alloy composite is studied on the basis of domestic alumina short fibers.
本文在国产氧化铝短纤维基础上，研究了氧化铝短纤维增强铝硅合金复合材料的凝固组织。
In this paper, the solidifying structure of alumina short fiber reinforced aluminum-silicon alloy composite is studied on the basis of domestic alumina short fibers.
应用推荐