主要介绍了一种新型截面的钢结构构件的试验分析。
The experimental study of steel structural member with a new type of cross section is presented.
基于结构可靠性原理，探讨钢结构构件的适用性设计规定。
Based on the principle of reliability of structures, the serviceability design stipulations are discussed and analyzed on steel members.
研究了基于应变模态的钢结构构件焊缝损伤的自动识别方法。
The strain mode based approach to identify weld damage in members of steel structure automatically is demonstrated in present paper.
这几种防火处理方法各有所长，不同的钢结构构件可用不同的方法来处理。
These fire prevention processing's methods are each have their own strong points, the different steel structure piece can handle with the different methods.
钢结构构件常被用到各大型建筑工程当中，吊装施工则随之成为工程中的重要环节。
Steel structure members are often used in large construction projects, and then the hoisting construction becomes an important part in the project.
南浦大桥主桥钢结构构件尺寸准确，全桥14万套螺栓现场安装无一扩孔，达到国际先进水平。
The steel structural members of the main span of Nanpu bridge require high dimensional accuracy. The 140,000 sets of bolts were all fitted and bored on the spot with advanced international level.
本文主要采用神经网络方法，依据结构的应变模态理论，对钢结构构件的焊缝损伤的自动识别问题进行了综合的研究。
The approaches to identify and locate weld damage in members of steel structure are discussed by using strain mode in this paper.
含高应力集中钢结构构件的厚度是影响其发生脆性破坏的一个重要因素，它的影响是和其应力集中区的复杂应力状态相联系的。
The thickness of steel elements with high stress concentration is a very important factor for brittle fracture. Its effects depend on the complex stress state for the stress concentration area.
整个汽车馆的主体结构为3000多件钢结构件，使用钢材超过1800吨，其圆锥型的外立面也采用了钢材，使得这一建筑更具延展性。
More than 1,800 tons of steel has formed a 6,000-square-meter, cylinder-shaped structure at the Puxi Shanghai Expo site along the Huangpu River.
在计算高层钢结构地震剪力时，周期应乘以0.9折减系数以考虑非结构构件对刚度的影响。
In calculating the seismic force of high-rise steel structures, the periods should be multiplied by a reduction factor (0.9) to account for the stiffness due to non-structural elements.
本文就钢结构轴心受压构件整体稳定系数计算的方法进行了探讨，提出了统一计算的方法。
So the unified computational method for the whole stability coefficient of axially loaded compression members of steel structure are discussed and presented in this paper.
典型应用：钢结构、船舶、汽车、挂车、地坪、压力容器、铁道车辆、集装箱、管道、储罐、桥梁、水闸等大型构件的涂装。
Typical Applications: steel structure, shipbuilding, automobiles, trailers, ground, Railway Vehicles, containers, pipes, tanks, bridges, sluice and other large components which need coating.
桁架是交错桁架体系的主要构件，桁架的标准化设计、工厂化制作对推动交错桁架体系在我国钢结构住宅中的应用具有重要意义。
Truss is the main structural component, its standardization design and factory melt produce is very important, for the application of the staggered truss system in the residence steel structure.
机舱底座为钢结构件，机舱内的零部件都通过接地线与之相连，接地线尽可能地短直。
The base of engine room is steel structure, the parts of engine room is connected base with earthing cable, the earthing cable should as shorter and straighter as possible.
为钢结构住宅体系的结构选型提供依据，在抗侧力体系的布置、构件选用等方面提出了设计建议。
The gist for structure lectotype and design consults about the disposal of the lateral resistant system and the member of columns are given.
拉杆锁头通过销钉与钢结构上耳板连接，另一端连接其他结构件。
Lock is connected to lug on the steel structure by pin, the other end is connected to other structure parts.
用此材料包覆钢构件的防火保护方法具有防火涂料无法比拟的优点，是一种理想的钢结构耐火保护方式。
This fire protection method by using the material to envelope steel members has an unparalleled advantage over the fireproof paint and is a kind of ideal fireproof protection of steel structures.
用电子束扫描加热的方法对具有毛细管板接头的不锈钢结构件进行钎焊是非常有效的。
It is very effective to use the scanning electron beam (EB) heating to braze the stainless steel structural part with capillary-to-plate joints.
作为钢结构中的主要构件之一的工字钢梁(H钢梁)是工程中使用最多的型钢之一。
Among various steel structures, I-steel beam (H-steel beam) is the most widely used as the main structure of almost all engineering works.
简要阐述该工程钢结构部分的设计，包括屋盖的结构选型、荷载取值、主要构件的计算等方面的内容。
It is expounded briefly the steel structure design, including lectotype of structure, load value and calculation method of the main concrete members.
一般钢结构的轴心受压构件，其截面设计都采用试凑法或逐次逼近法。
The common way of designing the section of steel-structure axle-center pressed structural member is trying means or gradual approaching means.
在钢结构中通常利用支撑提高结构或构件的稳定性。
Bracings are widely used to increase the stability of steel structures.
在这个设计中，对预制构件的需要，使得钢结构成为了最好的选择。
The need for prefabricated elements in this design made steel the best structural choice.
大型铸铁、铸钢件，钢结构件、大型锻件，热处理件的清砂、除锈去除氧化皮表面清理等。
Sand and rusts removing of large-sized cast iron, cast steel, steel structures, large-sized forging and surface treatment of oxidized work pieces.
薄壁构件的总势能方程在结构稳定分析和工程设计中具有十分重要的地位和意义，是进行结构稳定计算的基础和钢结构设计规范中制定相关设计公式的依据。
As a main indicator of structural stability, the total potential energy equation for thin-walled members is widely referred to in academeic research and practical design of steel structures.
箱形截面柱是高层钢结构建筑中的主要竖向构件，对柱截面的选择直接影响整个结构的用钢量。
To reduce the steel quantity and improve the stability of columns, a simplified method of selecting the section of box-section columns is presented.
无气喷漆应用于钢结构件涂装是保证喷涂效率和膜厚质量的有效措施。
The application of airless spraying to steel structure coating is an effective measure for ensuring spraying efficiency and film's thickness quality.
钢结构以其构件小、易成型、强度高等优势而普遍用作点支承玻璃结构的支承体系。
With the advantages of smaller size, easy formation and high strength, steel structure was widely applied to dot-support glass structure as support system.
整体建筑呈正方形，建筑形制为仿唐形式，结构类型为钢结构，斗拱为木构件。
The whole building was square, architectural form as the form of Tang, the structure type is steel, the brackets for the wood component.
大跨度玻璃钢屋盖是玻璃钢结构件应用于建筑工程的新领域。
The big span GFRP roof cover is a new application of the GFRP structure parts in the construction.
应用推荐