全钢焊接结构，具有足够的强度与刚性。
All steel welded structure, with sufficient strength and rigidity.
结构为全钢焊接结构，经振动时效处理。
The machine is made from all steel, vibration treated roil to reduce internal stress.
轮子旋转时需要承受巨大的和不断变化的压力，所以要使结构更坚固，钢的部分要用螺栓连接，而不是焊接在一起。
The wheel would need to withstand immense and constantly changing stresses as it rotated, so to make the structure more robust, the steel sections were bolted rather than welded together.
钢似乎是最佳的建材，但一旦被焊接成僵硬的结构就不行了。
Steel seems to be the best material, but not if it is welded to form a rigid structure.
用国际焊接学会推荐的方法进行统计处理，并和相同接头形式结构钢的疲劳强度进行了比较。
Moreover, the test data were statistical treated with the method recommended by IIW and compared with fatigue strength of structural steel with identical joint type.
本系列产品主机全部采用不锈钢焊接而成，结构稳定，外观精美。
D, this series of products are all made of stainless steel is welded into the host, stable structure, exquisite appearance.
本文建立了结构钢焊接工艺设计专家系统。
An expert system for welding process design for structural steels has been developed.
在钢的焊接结构中，疲劳裂纹几乎肯定从焊缝处开始产生，而不是其他细节处(或部位)。
In welded steel structures, fatigue cracks will almost certainly start to grow from welds, rather than other details.
研究了高强度细晶粒碳素钢焊接接头熔合区附近的显微组织及精细结构。
The microstructure and fine structure of weld fusion zone for high strength fine grain steel were studied.
TC4钛合金与钢的焊接结构是应用于航空工业的一种重要结构。
The welding between TC4 titanium alloy and steel is an important application in aviation industry.
阐述了作为弧形筛关键易损件的不锈钢焊接弧形筛网的工作原理、结构特征和实际应用。
As the key vulnerable component of the sieve bend, elaborated the stainless steel welded curve screen plate principle of work, structure characteristic and practical application.
经济存放柜包括固定架，二个铬合金止动手柄，全钢焊接铰链结构。层压板顶部配有具有橡木。
Economy storage cabinet consists of fixed shelves, 2 chrome locking handles, and all welded steel construction with concealed hinges. Laminate Top has medium oak finish.
一般结构用钢和焊接结构钢用在建筑钢结构，桥梁，船舶和汽车。
General structural steel and welding structural steel are used in the construction of steel structures, Bridges, ships and automobiles.
焊接钢桥结构持续损伤至破坏的过程可以从两方面加以分析：一方面要考虑此过程中能量的耗散；另一方面要考虑此过程中焊接部位损伤负向激励。
For the behavior of structure fracture, the dissipation of energy and the damage of passive encourage should be taken into consideration in the course of dynamic damage.
对应的两种钢的焊接接头，其超强匹配概率分别为3.64%和5%，在结构、焊接材料、工艺设计中值得注意。
To both steels, the over match probabilities are3.64%and5%respectively and that should be noticed in welding structure design, welding material selection, as well as procedure design.
焊接高强钢盖板的预应力钢梁构造简单，刚度较大，节约钢材，是一种值得推广的结构型式。
The prestress of steel girder by high strength cover plate can raise stiffness and save steel, with simple configuration.
采用HDPE分丝管索鞍，即将HDPE分丝管置于矩形焊接钢箱内，在分丝管外灌注高标号水泥浆的结构形式。
The cable saddle is a structure with its HDPE sleeves installed in a rectangular steel box and with the high-grade cement mortar grouted outside the sleeves.
从理论上分析了Q 460 C低合金结构钢焊接性能。
The weld ability of Q460C low alloy structural steel welded joints is theoretically analyzed in this paper.
前言：论述了用于上海市“东方明珠”球体空间网架结构的高耐候性低合金结构钢焊接钢管的开发研制过程。
The developing process of welded pipes made of high climate resistance low-alloy steel in "Eastern Pearl" space netted structure is discussed.
特别适合于家具、钢结构、车辆、五金等行业中焊接低碳钢、低合金钢、不锈钢等金属材料。
Especially suitable for furniture, steel, vehicles, hardware. other industry to welding the low carbon steel, low alloy steel, stainless steel and other metal material.
钢舱口盖采用焊接法建造，其结构要经船级社认可。
Steel hatch covers to be built up by welding, and to be of approved construction by the Classification Society.
本文主要阐述了碳钢、低合金结构钢、不锈钢、铸铁等金属材料的焊接技术。
This article focuses on the welding technology of the carbon steel, low alloy steel, stainless steel, cast iron and other metal materials.
对“PU-1”钢和焊缝合金断裂行为的研究结果表明，“PU-1”钻材钢抗H2S应力腐蚀性能和焊接性能较好，应用于结构钢构件具有显著的经济和社会效益。
The results show: drill steel type "PU-1" has good H2S stress corrosion resistant and weldability, which can be used for structures with high economical profit and society significance.
研究了TIG熔修对EH36钢T型接头试样落锤试验结果的影响和用于焊接结构的T型接头落锤试样的落锤试验方法。
By the Tjoint Dropweight Test, proposed by the authors, the influences of TIG weld dressing on the impact property of Tjoints of EH36 steel were studied.
文中对缺陷产生的原因进行了分析，认为缺陷系不锈钢复合钢特殊的焊接结构和制造工艺所致。
In this article defect occurring reason was analyzed and hold that the defect was caused by the special welding structure of the stainless steel clad plate and fabrication process.
特性：Q235钢属于低碳钢，是最通用的工程结构用钢之一。具有一定的强度、塑性、焊接性良好。
Characteristic: Q235 steel is lowcarbon steel and usually used in engineering structure with a certain extent of strength , plasticity and good weldability.
用于呈淬火状态下的低、中合金钢、异种钢结构，以及同类型的热强钢的焊接。
Used for welding in quench low and middle-alloy steel, different type of steel, and same type of high strength steel.
系列枪式点焊机广泛应用于大型网板和大型钢板结构件的成形点焊，可焊接低碳钢、不锈钢、铜、铝等金属圆材及板材。
QDN series gun-spot welder is widely used in the complete welding of the structures of large halftone and large steel plate.
重点论述了南环大桥四柱式桥塔结构、缆索体系、全焊接钢加劲梁、环氯沥青桥面铺装等关键技术。
The segment assembling connection is a key procedure during the construction of truss stiffening girder of long span suspension bridge.
重点论述了南环大桥四柱式桥塔结构、缆索体系、全焊接钢加劲梁、环氯沥青桥面铺装等关键技术。
The segment assembling connection is a key procedure during the construction of truss stiffening girder of long span suspension bridge.
应用推荐