将金属压进钢型中以使金属成型的过程。
A forming process that presses metal into or through a die (as in cold drawn wire).
硬化的不锈钢主要用于工具和钢型的生产。
Hardened stainless steels that are used in the manufacturing of tools and dies.
一排钢型工字梁加入到新开口中以加强结构。
A row of steel I-beams was incorporated into the new opening to reinforce the structure.
焊接钢型滚轧链条。焊接钢牵引链。附件和链轮齿。
Welded steel type mill chains, welded steel drag chains, attachments and sprocket teeth.
如果管道内流通的是腐蚀性液体，则应选用全不锈钢型的电磁阀；
In case that corrosive liquid flows in the tubes, stainless solenoid valves should be chosen.
直接利用激光快速成型的原型树脂模，结合陶瓷型精密铸造技术，制得了高精度、低表面粗糙度、高使用寿命的钢模具。
The steel dies with high dimensional accuracy, low surface roughness and long service life have been quickly produced by using prototyping resin molds as patterns of ceramic investment casting.
研究了高阶振型对顶部钢塔楼地震反应的影响，从而分析了高阶振型在钢塔楼地震反应中的影响程度。
The contributions of each vibration mode to seismic response of steel tower are studied and the influences of high-order modes on the seismic response are investigated.
研究了TIG熔修对EH36钢T型接头试样落锤试验结果的影响和用于焊接结构的T型接头落锤试样的落锤试验方法。
By the Tjoint Dropweight Test, proposed by the authors, the influences of TIG weld dressing on the impact property of Tjoints of EH36 steel were studied.
经过几种不同桥型的分析比较，确认了一种具有广阔应用前景的钢—混凝土组合桥梁。
After analyzing and comparing different types of Bridges, we affirm the steel-concrete bridge which is of broad prospects in application.
这里就是两个不锈钢门的所在地(一个可以进入房子而另一个进入私人美术馆)，其后是一个12米高的U型玻璃的外包层。
This is where the two stainless steel doors are - one to access the house and the other to access the private gallery - with the background of a 12 meters high U-glass cladding.
其中也包括不锈钢卫生型管道，用来将两个混合容器和线上混合器的A -成分测量泵连接起来。
Stainless steel sanitary type piping is included to connect the two mixing tanks with the A-component metering pump of the In-Line Mixer.
本机是用S型碾刀，通过不锈钢筛筒的筛孔，把物料挤出颗粒的设备。
This machine USES the S-shaped milling cutter to extrude materials into particles through stainless steel sieve tube.
衬垫系统由双层密闭氯丁橡胶组成，带有不锈钢O型环以附带在手套箱上。
Gasket system is made of double-layered, closed cellular neoprene, with stainless steel O-rings for attaching gloves.
一般说来，钢度强的浆适合于剧烈型的3d飞行，钢度弱的浆更受优美的F3C飞手青睐。
Generally speaking, stiffer blades are better for hard 3d flight and less stiff blades are appreciated by graceful F3C pilots.
从整体动力特性可以看出，当高层建筑在地震动作用下产生振动时，屋顶钢塔在高层建筑屋顶层振动的激励下，产生二次型振动，发生显著的“鞭梢效应”。
With respect to integral dynamic properties the steel tower will have secondary vibration under the vibrational stimulation of high-rise building under earthquake to have remarkable whiplash effect.
采用正电子湮没寿命方法研究了国产改进型316L不锈钢的微结构及其温度变化。
Microstructure of homemade modified 316l stainless steels and its thermal annealing behavior are studied by the positron annihilation lifetime technique.
避免水管路进口和出口和钢摸加紧设备的T型槽位置冲突。
Avoid water line inlets and outlets through die clamp platen machine T-slots.
采用CD 40柴油机油为工作介质，在发动机冷却系统实际工况下，对21种几何尺寸的错列锯齿型不锈钢翅片进行了研究。
With CD40 lubricating oil as work medium, under the engine cooling system work conditions, 21 geometrical schemes of stainless steel offset strip fins were studied.
本文采用正交设计法系统地研究了微量合金元素对18 - 8型不锈钢铸态耐蚀性能的影响。
Influences of trace alloy elements on the corrosion properties of as-cast 18-8 stainless steel have been studied in detail by orthogonal design experiments.
防止18 - 8型不锈钢技深件纵向开裂的有效措施之一是在拉深时采用小于板料厚度的凸凹模间隙。
One of the valid method to reduce the vertical breaking in deep-drawing of 18-8stainless steel is to adopt a die clearance which is less than the plate thickness.
这种新辊型对低塑性钢穿孔质量的改善和实现大前进角强化穿孔过程都有很大意义。
This new roll shape is very effective for improving pierced quality of low plastic steel and intensifying piercing process with larger cross angle.
对原始组织为马氏体的冷轧15钢在CS - IB型六面顶压机上进行了高压热处理，测量试样的维氏硬度。
The martensitic steel 15 was heat treated under high pressure in the CS-IB type hexahedron anvils press. The Vickers hardness of the sample was measured.
描述汽车排气系统的结构及其对材料的特殊要求，介绍不锈钢分公司409型铁素体不锈钢的开发过程。
Structure of the automotive exhaust system and its special requirements for materials are described. The development process of the company's 409 ferrite stainless steel (FSS) is introduced.
钢中珠光体转变属典型的扩散型共析转变。
Pearlitic transformation in steel is a typical diffusion eutectoid transition.
结果表明，该腐蚀属阴极氧去极化型腐蚀，与不锈钢-碳钢短路体系的腐蚀行为非常相似。
Results indicated that the corrosion belonged in cathodic oxygen depolarization corrosion, just like that of carbon steel-stainless steel couple.
路面膨胀缝为模塑橡胶分节膨胀缝系统或钢指型膨胀缝系统，详见图纸。
The roadway expansion joints are of molded rubber segmental expansion joint system or Steel Finger type expansion joint system detailed on the Drawings.
研究了时效温度和保温时间对时效硬化型超低碳含铜钢的显微组织和硬度的影响。
The effects of the aging temperature and holding time on the microstructure and hardness of the ultra-low-carbon steel bearing copper were investigated.
研究了时效温度和保温时间对时效硬化型超低碳含铜钢的显微组织和硬度的影响。
The effects of the aging temperature and holding time on the microstructure and hardness of the ultra-low-carbon steel bearing copper were investigated.
应用推荐