你如何看待钢坯市场短期前景？
How do you view the short-term outlook of the billet market?
提出了一个钢坯爆炸焊接的计算模型。
A calculation model is proposed for explosive cladding of steel billet.
你如何看待钢坯市场？
为了解决钢坯的运输问题设计了钢坯运输车。
In order to solve the transport problem of billet, the billet transport vehicle was designed.
轧钢加热炉普遍存在着钢坯加热黑印的缺陷。
There is the defect of serious dark mark in continuous heating furnace.
概述了国内外钢坯高温防氧化涂料的研究现状。
The oxidation resistant coatings applied to steel billet at high temperature were summarized.
使用涂料后，能有效地防止钢坯加热时的氧化。
The paint can prevent heated slab from oxidizing effectively.
分析了动态过程钢坯高温防氧化涂料的技术要求。
The technical requirement of oxidation resistant coatings applied to steel billet in high temperature dynamic process was analyzed.
东南角落暴露出来部分的军事钢坯，部分外墙也已经脱落。
The southeast corner of the military billet was exposed and parts of the outer wall removed.
上述研究结果可为加热炉钢坯加热制度的制定和优化提供依据。
The above result of study can offer foundation for the establishment and optimizing of billet heating system.
介绍了一种自主开发的动态过程钢坯高温防氧化涂料的应用状况。
Application status of a new homemade coating for steel billet in high temperature dynamic process was introduced.
钢坯在加热炉的加热过程是影响设备运行和产品质量的关键环节。
The process of heating steel billets in the heating furnace is a key link of influencing equipment operating and product quality.
主要介绍了可编程序控制器在热钢坯端面打号机控制系统中的应用。
The application of programmable logic controller in the control system of the hot billet marking equipment was introduced.
重点叙述了钢坯加热在线数学模型的建立方法和几个主要控制策略。
The establishing method for the on -line mathematical model of the steel slab heating and several major control strategies are described emphatically.
另外，作者还对基于钢坯温度场智能预报的加热炉最优控制进行了研究。
In addition, the writer studies optimize control based on intellect predicting of temperature field of reheating furnace iron bodies.
通过试验，制备出适用于在高温状态下，阻止镍铬合金钢钢坯氧化的涂料。
Anti oxidation coating created is applicable to prevent oxidation of Ni Cr alloy steel blank at high temperature.
由于炼钢过程的自动化和高质量钢坯的要求，炼钢厂需要越来越多的电子秤。
For steelmaking process automation and high quality billet, more and more electronic weighers are needed in steelmaking plant.
主要讨论如何基于工件(钢锭、钢坯等)的热状态来进行均热炉的优化控制。
The thermal states of the steel workpieces heated in a reheating furnace are used to optimize the control of the furnace.
主要介绍了可编程序控制器（PLC）在热钢坯端面打号机控制系统中的应用。
The application of programmable logic controller(PLC) in the control system of the hot billet marking equipment was introduced.
当轧制一根由许多钢坯焊成的无限长钢坯时，就会大大地提高产量、降低成本。
Significant improvements in output capacity and in conversion costs are achieved when rolling a billet of infinite length obtained.
钢坯在炉内的横向跑偏和纵向跑偏位移量，是步进式加热炉设备的重要性能之一。
The transverse and longitudinal snaking displacement of billets in walking beam furnace is an important furnace performance index.
降低或取消了钢坯、钢材、未锻轧铝等高能耗、高污染和资源性产品的出口退税。
Conversely tax rebates were cut down or removed on products featured with heavy energy consumption heavy pollution and resource-related such as billet rolled steel and aluminum not forged or rolled.
针对中厚板生产中出现的钢坯混钢问题，建立了推钢式加热炉钢坯实时跟踪系统。
In order to resolve the billet-jamming problem during plate production, the real-time tracing system for billet of pushing reheating furnace has been established.
根据钢坯的种类、规格、开轧温度，通过建立的数学模型计算了钢坯的出炉温度。
The mathematical model in heating furnace is set up for calculating billet tapping temperature according to billet heterogeneity, specification and opening rolling temperature.
热剪刃是钢厂用来切断热轧钢坯的主要工具，其性能直接影响到连铸钢坯的质量。
Hot-shear blade is the main tool which is used to cut hot rolling steel billet. Its performance directly affects the quality of continuous metal casting billet.
在详细分析钢坯出炉后热过程特点的基础上，建立了线材控冷轧制热过程数学模型。
The mathematical model of wire cool controlled rolling based on the analysis of thermal process of billet after being discharged is established.
建立能量平衡方程、钢坯导热微分方程、氧化层生成线性和抛物线增长的组合方程。
Energy balance equation, differential equation of heat conduction and combination of linear equation and parabolic equation of oxygen-layer forming are established.
当钢坯被轧制为线材时，钢坯表面的“凹坑”缺陷对线材的表面质量仍有一定的影响。
When it is rolled into wire rod, the pit defect can be seen, affecting the surface quality of wire rod.
当钢坯被轧制为线材时，钢坯表面的“凹坑”缺陷对线材的表面质量仍有一定的影响。
When it is rolled into wire rod, the pit defect can be seen, affecting the surface quality of wire rod.
应用推荐