通过工艺试验构造了训练与测试样本集。
Then the training and testing samples were constructed through technical experiment.
并通过工艺试验确定了合理焊接规范参数。
通过工艺试验和实际应用验证了工艺方案的可行性和优越性。
The feasibility and advantages of PEFM are proved by the technologic test and practical use.
通过工艺试验结果与模拟结果的比较，证明了二者具有较好的一致性。
The comparison of technical test results with simulation data shows their better consistency.
通过工艺试验，分析了纤维性能、纺纱工艺等影响纱线质量的一些因素。
According to processing test, the influences of the material properties, the spinning process etc. on the yarn quality are analyzed.
通过工艺试验、耐磨试验和显微组织观察分析，研究了氧-乙炔火焰喷焊层的常规性能。
Through the process test, wearing test and microstructure observation and analysis, the convention performance of oxygen-acetylene flame spray welded layer is studied.
对紫铜管与低合金钢管的焊接特点进行了分析，通过工艺试验研究，找出了较合理的焊接工艺方法。
The characteristics of the weld between copper tubes and low alloy tubes were analysed, and reasonable weld technology methods were found out through some experimental investigations.
结合生产实践，通过工艺试验，简述了在生产实践中遇到的质量成本问题，并提出了初步的解决方法。
By doing the process testing, this paper briefly discusses the problems of quality cost met in production, and suggests the preliminary solutions to the problems.
通过工艺试验及试验件锻造缺陷分析，改进了锻模飞边槽结构，解决了试生产过程中产生的锻造折叠。
Through trial production, the forging defects of the samples were analyzed. The structure of die flash groove was improved. The problem of overlapping in samples was solved.
通过工艺试验从铸造工艺和原材料质量两方面进行原因查找，获得了现有生产条件下造成硬度偏低的原因。
Trough technological test, the reason of low hardness was checked from two aspects:the casting process and raw material, so the reason was obtained.
介绍了该技术的基本原理，通过工艺试验优化了相关工艺参数，证明了该技术用于导光板生产具有较高的精度和效率。
This article introduced basic principle of this technology. Process test optimized process parameter and gave out better precision and efficiency for LGP mass production.
介绍我国首台百万等级超超临界锅炉节流管圈的焊接难点，通过工艺试验，开发了新的焊接工艺，解决了该技术难题。
Throttle coil weld technology of Yuhuan 1000MW ultra supercritical boiler is solved by technology test and development of new weld technology.
介绍了圣麻纤维和细旦涤纶纤维的性能特点，通过工艺试验，分析了纤维性能、纺纱工艺等影响纱线质量的一些因素，探讨了提高成纱质量所采取的有效技术措施。
The properties of fine denier polyester fiber and viscose fiber are introduced, and some factors affecting the yarn quality such as fiber properties and spinning process are analyzed.
通过试验，得出了该配方的最佳工艺参数，并对影响抛光效果的因素进行了分析。
The optimal technological parameters of the formulation were obtained by test, and the factors influencing polishing effects were analysed.
然后通过试验，提出了新的热处理工艺，有效地解决了扳手的裂纹问题。
Through tests, a new technique of heat treatment is put forward, which efficiently solves the craze problem of wrenches.
目的通过试验确定咽喉雾化剂的提取工艺。
Objective To ascertain the extracting technology of fauces aerosol inhalation by experiment.
本文研究了银杏叶及枸杞的浸提工艺，并通过正交试验确定了保健饮料的最佳配方。
This article studied water extraction technology of Gingkgo leaf and medlar and identified the best prescription of health drink by orthogonal design.
研究了淀粉基黄原酸盐的合成新工艺，通过正交试验选定了最佳工艺条件。
A new technology for synthesis of starch xanthate was studied, the optimum process conditions were selected via orthogonal tests.
通过正交试验得出合理的发酵工艺条件；
The rational fermentation technology was also obtained through orthogonal tests.
通过加工试验，证实了该工艺的实用性。
By machining experiment, practicality of this process has been confirmed.
并通过工业试验为工艺设计和工业运行确定了有关参数和运行条件。
And through industrial experimental running, relevant parameters and operating conditions are determined for technological design and industrial running.
文章阐述了复合压裂工艺原理，并通过现场试验，研究了复合压裂增产效果。
Technological principle of composite fracturing is described. Stimulation effect of composite fracturing is studied through field test.
通过试验，确定了生产工艺和添加剂的配方。
By testing, the productive process and the additive prescription are given finally.
通过网格试验研究分析了枝叉管形件剪-挤工艺过程的金属流动情况及其变形规律；
Grid-experiments are performed to investigate metal flow and deformation in the shear-extrusion process of tubular components with branches.
通过切削试验，确定了合理的工艺参数。
Appropriate processing parameters are established through cutting test.
通过大量工艺试验，找出了影响加工精度的主要因素，对这些因素从理论或试验的角度进行了分析。
Through a lot of machining experiments, the factors that impact on the process precision were found out and analyzed from the aspect of theory or experiment.
通过大量工艺试验，找出了影响加工精度的主要因素，对这些因素从理论或试验的角度进行了分析。
Through a lot of machining experiments, the factors that impact on the process precision were found out and analyzed from the aspect of theory or experiment.
应用推荐