滚动轴承。止推轴承座。外形尺寸。
Rolling bearings. plummer block housings. boundary dimensions.
被动轴承座后边装有液压装置。
用两个定位销将座罩和轴承座基础对准。
主传动轴承座可分拆结构,方便安装及维护。
Sparated Bearing block for main transmission shaft Easy for maintenance and fix.
主要产品:轴承座、主轴、齿轮箱、发电机等。
Main products: bearing bracket, principal axis, gearbox and Generator etc.
它有一个平底面方形支脚,可帮助轴承座精确对中。
轴承座内的油位标记和油位表使油位保持在正确水平。
Oil level marks in the housing and an oil level gauge help to keep the correct oil level.
通过改进拉伸凸模结构,提高球面轴承座模具加工质量。
Through improving the punch structure, improved the spherical surface bearing housing die machining quality.
这种设计的轴承座具有多种功能,能满足广泛应用的要求。
Bearing this design has multiple functions can meet the wide range of applications.
目前我国托辊轴承已开始用冲压轴承座代替原铸铁轴承座。
Cast iron bearing housing for conveyor idlers is being replaced by pressed housing in our country.
实践证明,由该模具压制的轴承座,性能完全符合设计要求。
The practices point out that the bearing bases produced by the mold accord with the demands.
轴承一般设一个小轴向间隙,以弥补轴和轴承座的长度变化。
The bearings are generally installed with a small axial clearance in order to compensate for length variations of shaft and housing.
轴承座分 别将两根执行丝杆及位置传动丝杆固定在底座上;
By bearing seat two executing screw shafts and position driving screw shafts are set on the base plate.
设计校核皮带轮传动、蜗轮蜗杆传动、圆筒、轴承座、导杆等。
Pulley gear, worm gears, cylinder, bearing base and quadrate pole etc were designed and checked.
总结了利用该方法加工转炉轴承座内球面的步骤及其误差控制。
The step and error control in machining the converter bearing seat with this method are summed up.
介绍WK - 4型电铲提升卷筒轴承座及盖磨损修复的方法。
The repairing wearing method of cover and shovel of hoisting drum of WK-4 type shovel is introduced.
汽轮发电机组轴承座动力特性对转子-轴承系统振动有比较大的影响。
The dynamic properties of bearing support system has large influence on the vibration of large turbo generator unit.
分析了汽轮机厚断面球铁件轴承座的设计特点、铸造技术和超声波探伤。
The design characteristics, foundry technology and ultrasonic test method of heavy section ductile iron bearings for steam turbines was described and analyzed.
通过对数控机床主轴承座的振动分析表明,该系统具有较高的应用价值。
The results indicate that the system is valuable and available at vibration fault diagnosis of NC machine.
用这些值和根据运行条件选择的安全系数,就可以算出轴承座的允许负荷。
Using these values and a safety factor selected with respect to the operating conditions, the permissible load for the housing can be calculated.
这些轴承座(系列p)用冷轧钢板制造,表面经过黄色镀铬处理,以防腐蚀。
These housings (series p) are produced from cold rolled sheet steel and are protected against corrosion by a yellow chromate surface treatment.
第五、轴承座轴承装配孔尺寸、形状、精度不好的情况下不能发挥出最佳性能。
Fifth, in the bearing seat bearing assembly hole size, the shape, the precision not good situation cannot display the optimum performance.
在此基础上,设计制作了托辊轴承座双腔模具及CP-DMC模压料预压模具。
After studying on the molding technology, this paper designs a mould of bearing base and a mold for prepress of CP- DMC.
这些滚动轴承座是在SD轴承座的基础上开发出来的,在尺寸上彼此可以互换。
The bearing is a bearing on the basis of SD developed, in size can be interchangeable with each other.
用同样的原理和方法对系列轴承座的铸造工艺进行了优化并在实际中获得了成功。
By the same principle, we succeeded in optimizing the foundry technology of bearing support.
因此选择泵的安装位置时,要使泵盖和轴承座的热量便于扩散,不出现任何蓄热现象。
Therefore, when selecting the installation position of the pump, the heat quantity of the pump cover and the bearing seat is easy to spread, and no heat accumulation phenomenon occurs.
滑动轴承座由上盖、底座、剖分轴瓦(铝青铜),安装螺栓组成,主要承受径向载荷。
Plain Bearing Block Housings are made up of cap, base, aluminum bronze bushing and installing bolts, which mainly bear radial load.
滑动轴承座由上盖、底座、剖分轴瓦(铝青铜),安装螺栓组成,首要承受径向载荷。
Plain Bearing Block Housings are made up of cap, base, aluminum bronze bushing and installing bolts, which mainly bear radial load.
滑动轴承座由上盖、底座、剖分轴瓦(铝青铜),安装螺栓组成,首要承受径向载荷。
Plain Bearing Block Housings are made up of cap, base, aluminum bronze bushing and installing bolts, which mainly bear radial load.
应用推荐