虚拟机技术利用软件模拟硬件及系统环境，在很多领域被广泛应用。
The technique of virtual machine that utilizes hardware and the system environment with software has been used widely.
该中断系统的实现表明，在计算机上用软件模拟硬件，应用于实验、教学和进一步的研究中是具有可行性的。
The implement of this system shows that simulating hardware with software on computer and applying this kind of system to teaching, experiment and farther research is feasible.
我们已经使用WPT来模拟拥有上百万书籍的书店，在真实客户使用之前找到并解决软件、硬件，以及集成问题。
We have been using WPT to simulate millions of bookstore could find and resolve software, hardware, and integration problems before the real customers do.
由于本文重点是使用QEMU开发测试跨平台软件，可能会包含少量的硬件交互，我重点介绍系统模拟。
Because the point of this article is using QEMU to develop and test cross-platform software, which may entail subtle hardware interactions, I emphasize system emulation.
虽然QEMU是一个平台模拟器，但它还提供各种硬件设备的软件模拟，包括NICs。
Although QEMU is a platform emulator, it provides software emulation for a variety of hardware devices, including NICs.
作为舰艇航行操作仿真训练系统课题的关键组成部分，它提供了一个用软件模拟传统硬件的方法，结果表明是确实可行的。
As a key com-ponent of vessels simulation - training system, it offers a piece of method which using software to imitate classical hardware, and indi-cating to be really feasible.
从硬件结构和软件功能上描述了采用CAN现场总线技术构成的机舱实验室模拟监视报警系统及其实现的功能。
The hardware structure and the software function of a ship's engine room simulation and monitoring alarm system based on CAN field bus in the laboratory were described.
本文还对汇流条控制器的模拟量输入通道、数字量输入通道、数字量输出通道进行了自检测设计，包括硬件BIT设计和软件实现方法。
The built-in test (BIT) design of hardware and software is also introduced in this dissertation. The BIT design consists of analog inputs, digital inputs and digital outputs.
利用计算机技术，通过硬件电路设计及软件编程，在模拟人上实现多种针灸教学功能，为学员提供可操作的人体模型。
With the computer technology, hardware circuit design and software programming applied, a multimedia simulating body for acupuncture teaching and training is developed in this paper.
进行了数控硬件设计和软件设计，开发了一套玻璃最优化切割的数控模拟系统。
The paper designs software and hardware, develops a analog digital control system of glass optimal cutting.
介绍了热动力环境模拟试验设备的设计，并分析了测控系统硬件、软件结构。
The design of the thermodynamic environment simulation test equipment is introduced and the software and hardware structures of measurement and control system are analyzed.
本文介绍了原油结蜡模拟环道scada系统设计方案，重点介绍了监测系统的硬件网络和组态软件实现功能。
This paper describes the designed method of crude oil wax deposit imitating pipeline SCADA system,. The hardware network and configuration software of the supervisory control system are introduced.
作为这项工作的一部分，波音公司的首席飞行员迈克·卡里克进行了模拟测试的每一个飞行控制，硬件和软件系统。
As part of this, Boeing chief pilot Mike Carriker conducted a simulation that tested each flight control, hardware, and software system.
针对温度模拟系统对控制器的要求，提出了以ARM为核心的温度控制器的设计方案，并进行了硬件设计及软件设计。
For the requirements of the system, a controller, whose kernel is ARM, is designed. The controller design includes hardware design and software design.
在介绍硬件设计方案的基础上，描述了生成模拟目标和判断跟踪状态的FPGA内部软件结构。
Based on introducing the hardware design, describes the software structure in FPGA, which includes the simulated target and judging tracking state program.
采用软件无线电技术和软硬件相结合的方法较逼真地实现了海战场复杂电磁环境下雷达中频信号的模拟。
A method integrating software radio technology with software and hardware is used to realize living simulation of MF radar signal under complex sea battlefield EM environment.
阐述了如何以软件代替硬件，利用多媒体技术实现控制系统模拟。
The way to emulating control system with multimedia software instead of hardware is described.
论述了基于ARM7内核的嵌入式应用程序调试技术，针对其中的难点即如何调试固化在ROM中的代码、如何使用软件模拟器模拟硬件系统进行了详细分析。
This article discussed the debugging of embedded application based on ARM7 core. Simulating peripheral with the software simulator and source-level debugging of ROM images were analyzed in detail.
该协同验证环境由嵌入式软件调试器和嵌入式硬件模拟器组成，其采用了指令集结构的协同模拟模型。
The co verification environment consists of an embedded software debugger and an embedded hardware simulator. It adopts instruction set architecture co simulation model.
根据系统硬件和软件的设计方案，本文使用实验室现有FPGA开发模拟系统对设计方案进行了验证。
Based on the design of the hardware and software system, the paper testifies system's design by using laboratory's FPGA design and simulation system.
研究了基于变异的机器代码级故障注入方法，它不仅可以方便地模拟普通的硬件故障，而且74%的软件故障也可以找到对应的变异方法。
An approach of fault injection at machine level code based on mutation is developed. It can simulate the hardware faults easily. The mutation modes of 74% software faults can be found.
本文介绍了模拟视频模块的硬件框架和基本硬件设计，并详细描述了模拟视频转换模块的软件实现以及性能优化措施。
The hardware framework and design of the analog display module is presented, as well as software solutions and the measures to optimize its performances.
根据中试采矿模拟实验方案，运用机电一体化技术研制了一套作业模拟及动力学测试实验系统，并进行了系统软件和硬件设计。
A set of task simulation and kinetic measurement experimental system were built according to experimental scheme by use of mechatronics. Hardware and software of the system were designed.
内容包括模拟机硬件、软件的设计和实现方法、主要功能和系统的基本组成、考核智能评分的实现。
The content includes designing and developing the hardware and software of the simulator, its basic components and the method for grading the operator in test.
为评估DSP硬件设计、DSP算法的实现提供了很好的软件模拟平台。
It provides a good software platform for DSP design and DSP algorithms implementation.
通过与测井信号模拟器的系统联调，结果表明硬件电路设计合理，软件可靠，能满足油田测井的要求。
The designed circuit and program is proved reasonable and reliable by the logging signal simulator, which can meet the logging requirement of oil field.
硬件设计简单可靠，结合软件，基本实现了四层电梯运行的模拟。
Hardware design is simple and reliable, the combination of software, basically a four-story elevator operation of the simulation.
硬件设计简单可靠，结合软件，基本实现了四层电梯运行的模拟。
Hardware design is simple and reliable, the combination of software, basically a four-story elevator operation of the simulation.
应用推荐