通过解析计算可得到多种型线。
A variety of cycloids are available through analytic computation.
本文叙述一种软带函数凸轮的解析计算法。
This paper presents a calculating method of tape drive function CAM and gives calculating formulas which are available.
并分别对所建模型进行了相应的解析计算。
介绍了确定补偿滑轮铰点合理位量的双曲解析计算法。
A hyperbolic analytic method to determine rational location of pivot of compensation block is introduced.
也可不用任何解析计算,随意地设计出理论上可行的型线。
Workable cycloids can be designed at will and without analytic computation.
基于全量塑性理论及膜应变假定,推导了轴对称情况的解析计算模型;
Then an analytical model for axisymmetric case is developed based on the total strain theory and membrane assumption.
分析了CVT金属带轴向偏移问题,并对其轴向偏移量进行了解析计算。
Based on the analysis of metal belt misalignment of CVT, the mechanism of the belt axial misalignment was computed and analyzed.
提出了一个经验公式,用于解析计算颗粒物在非均匀电场中的最大场强。
The empirical formula for calculating the maximum electric field strength of the particle in a non uniform field is derived.
该文对初始稳定流开始的液流通过节流孔的过渡过程进行了数值解析计算。
The transient flow through a pipe orifice starting from an initial steady flow has been studied via numerical analysis.
通过解析计算和数值模拟得到,加性白噪声不能驱动分子马达产生定向运动;
Through the analytical calculation and numerical simulation, additive white noise can't induce molecular motor to produce direct motion.
试验与计算结果表明本套软件适合于旋转的流体机械的流场图像的解析计算。
Calculation and experiment results show that the software is suited for analytic calculation of flow visualization in rotational fluid machinery.
本文在远期鞅测度下,应用信用风险结构模型对循环贷款价格的解析计算进行研究。
Using forward martingale methods, this paper analytically studies the pricing revolver loan in the framework of credit structural model.
另外,有关稳态密度轮廓变陡的解析计算,也正确地反映了有关实验及计算机模拟的结果。
In addition, the analytic calculations for steady state, steepened density profile are also well consistent with the results obtained by using microwave plasma experiments and numerical simulation.
采用解析计算的形式预测弹头落点,利用非线性最小二乘方法搜索最优横向力,从而获得制导指令。
The analytical calculation of form, using penetration forecast method of nonlinear least squares search optimal lateral force, thus guidance commands was gain.
本文在气隙磁场解析计算的基础上,对引起永磁电机转矩波动的各个因素进行了深入的分析和计算。
The analysis of magnetic field in the gap is based on the calculation of torque ripple caused by various factors in-depth analysis and calculation.
测得应力波形状与解析计算相吻合,证实了在上述光强范围内激光在铝靶中产生应力波的热弹性机制。
An analytical calculation identifies the hot -elastic mechanism of the laser induced stress wave in the aluminum targets herein.
几何和材料非线性的特点使得其弹性特性的解析计算非常困难,其设计和制造主要依赖于反复的实验。
But the nonlinear characteristic of the materials and the geometry make its resolution and calculation very difficult, and so its design or production mainly depends on repeating experimentation.
通过支撑辊弯曲强度解析计算,得出支撑辊辊颈和辊身的弯曲应力,并确定此支撑辊的薄弱点在辊颈处。
By analysis calculating bending strength of back-up roll, it can educe bending stress of end and body of back-up roll, and define weak spot that is both end of back-up roll.
介绍了太阳电池及方阵的数学模型和电路模型,特别针对用于计算机解析计算的模型进行了详细地描述。
The mathematical model and circuit model of solar cell and array were introduced in this paper, especially the analytical numeration model for computer was described in detail.
在图解的基础上进行解析计算得出各参数间的通用公式,为直滑轨襟翼运动机构的机助几何设计奠定了基础。
A set of general formulas derived from the graphic calculation has been provided for the computer-aided geometric design.
对于速度边界层提出了相似性解的解析结果,给出了速度分布、边界层厚度、摩擦阻力和水头损失的解析计算表达式。
Calculation formula of velocity distribution, boundary layer thickness, friction force and loss of water head are given out, in accordance with the result from theory analysis of similitude solution.
该方法把切向加速度和法向加速度作为状态变量,给出了切向加速度和法向加速度为常值时解析计算状态转移的方法。
An analytical solution is presented to compute the state transfer function when both normal and tangential acceleration are constant. This model can give a better priori acceleration estimation.
电磁结构设计中,采用电磁场解析计算进行初步设计,进而采用有限元法对致动器的结构和线圈参数进行进一步的分析与优化。
The magnetic circuit structure of actuator is designed by analysis method. The structure and parameters are analyzed and optimized by electromagnetic field FEM.
以日本神钢电机公司制造的PM型(永久磁铁型)SLPMU-025A为样机,利用等效电路法对其效率特性进行了解析计算。
Taking PM type(the permanent magnet model) SLPMU -025A motor as an example , this paper makes analytical calculation of its efficiency characteristics by the means of equivalent circuit.
给出了波荡器垫补修正场的简单解析计算式,可根据垫片的位置、大小、厚度、磁极间隙等参数直接计算出对磁场及位相的修正。
An simple analytical computation formula is given for field signature of the shims to predict the field and phase perturbation according the shim position, size, thickness and magnet gap.
根据原子物理晶体模型,采用原子间相互作用的势函数分析方法,得到了由微观物理量表示的金属单晶体杨氏模量的解析计算式。
The elastic modulus of inert element crystal and metal crystal with fcc structure depended on pressure in L-J and Morse interaction are obtained respectively.
根据研究所得的宽展规律,采用有限元分析与解析计算相结合的方法,建立了适合宝钢2050粗轧区带钢宽展计算的快速仿真模型。
Based on the spread rule obtained, a fast simulation spread model for 2050 hot strip roughing trains at Baosteel has been established by combining the finite element analysis and analytical model.
宾汉极限切应力是描述非牛顿体流变特性的一个重要参数,由于流体中泥沙颗粒之间作用的复杂性,使得宾汉极限切应力的理论分析还不完善,其解析计算也较繁琐。
As the role between the sands is so complex, the theoretical analysis of the Bingham yield stress has not been so perfect, and the analyzed calculation was much multitudinous.
即使到目前为止您已经执行了所有操作,但您仍然没有足够的信息来计算该解析树表示的算术运算的结果。
With everything you've done so far, however, you still don't have quite enough information to calculate the results of the arithmetic operation represented by this parse tree.
即使到目前为止您已经执行了所有操作,但您仍然没有足够的信息来计算该解析树表示的算术运算的结果。
With everything you've done so far, however, you still don't have quite enough information to calculate the results of the arithmetic operation represented by this parse tree.
应用推荐