螺旋脉冲形成线实验研究。
采用固体继电器和脉冲形成软件代替传统的SCR调功器。
Traditional SCR power-regulator are fully substituted by solid-state relay and pulse generation software.
此变压器可用于低阻抗陶瓷脉冲形成线输出端的阻抗变换。
This transformer can be used to realize the output impedance transformation of the ceramic pulse forming line with low characteristic impedance.
数字系统使用信号脉冲形成的,也就是说,一系列的短周期平方波。
Digital systems use signals, which are of pulse form, that is, a series of short-duration square waves.
推进脉冲形成线按钮的渠道湾肯定的是,脉冲形成线的渠道A是赶走。
Push the PFL button of channel B. Be sure that the PFL of channel a is off.
该装置的电路由脉冲形成源、压频变换器和光耦与功率开关三部分组成。
The circuit of this device is formed the source, pressed frequently by the pulse changer, photosensitive resister and power switch three parts make up.
介绍了一种水介质脉冲形成线强流电子束加速器的输出开关的设计和实验结果。
A compact output switch for a water pulse forming line (PFL) e-beam accelerator was designed.
采用螺旋形结构的脉冲形成线能在形成同样脉冲宽度的前提下大大缩短形成线的长度。
It can reduce the length of the pulse forming line on the premise of forming the same output pulse width to adopt a helical structure.
检测仪器除了恒流源外,主要还有温度补偿、脉冲形成、脉宽鉴别以及编码、译码等电路。
In addition to the current source, the detecting instrument mainly contains the circuits for temperature compensation, pulse formation, pulse duration discrimination and encode, decode.
本文主要介绍几种亚纳秒脉冲的形成技术,其中包括脉冲形成线截取技术和脉冲压缩技术。
In this paper, some sub-nanosecond pulses forming technology, including the intercepting and compressing technology of forming pulses is introduced.
通过实验研究了充电介质、螺旋匝数及形成线结构与螺旋脉冲形成线特性参量间的数值关系。
The relations between dielectric, Numbers of circles and the characteristic parameters of the helical line were studied.
通过理论分析和计算,设计一个高电压脉冲形成网络,用来得到高功率微波源需要的长脉冲电压方波。
In this paper, by theoretical analysis and numerical calculation, we design a high voltage pulse forming network, which can provide long duration voltage square wave for high power microwave sources.
介绍了具有预脉冲屏蔽板的水介质脉冲形成开关的结构和等效电路模型,给出模型中等效参数的计算方法。
The configuration and simulation model of water pulse forming line switch with prepulse suppression ground plane (PPS) were introduced in this paper.
接着介绍了超宽带的脉冲形成方式、调制方式、收发机系统结构、信号衰减模型、室内多径信道模型以及各种多址系统,为后面的章节做好铺垫。
Then introduces the pulse waveform, the architecture of the UWB transceiver, the fading models of the signal, the indoor channel models, at last some multiple access systems are presented as follow.
脉冲形成线独奏的功能,您可以轻松地设置您的增益,以完美的水平,高通滤波器可让您将低频震动- 100Hz的和地下的渠道,1至3 。
The PFL solo function lets you easily set your gain to perfect levels, and high pass filters allow you to cut low frequency rumble—100Hz and below—on channels 1 to 3.
设计一种视频处理电路,通过介绍一种前置放大,CRT驱动的视频处理电路,系统包括前置放大电路、钳位脉冲形成、CRT驱动电路、白平衡调整等部分。
This paper describes a CRT video circuit with pre-amp and driver control. This system includes pre-amp circuit, clamp pulse production, blank level...
首先到达脉冲源的神经元就会和他们的靶点形成突触结合,相比之下,落后者不是繁殖而是退化。
The first to arrive at the pulsating source proceed to form synaptic connections with their targets; any laggards, by contrast, fail to proliferate and instead degenerate.
这个概念是,当被击中时,金属弹丸使两个带电板块撞起,形成一回电路和释放的电力脉冲,这可以打碎弹头了。
The idea is that when hit, the metal in a projectile shorts the two charged plates together, forming a circuit and releasing a surge of electricity which can break the warhead up.
当这个玻璃通过激光进行"读取"时,体素会产生微小的光漩涡,这些光漩涡的属性是由形成每一个“体素”的激光脉冲所事先决定的。
When that glass is then "read" by a laser, the voxels produce tiny whirlpools of light, the properties of which have already been determined by the polarity of the laser pulse that created each voxel.
形成黑洞的关键环节,就是要像脉冲星崩溃时出现的情况一样,把足够大的质量或能量压缩到足够小的体积。
The key to forming a black hole is cramming enough mass or energy into a small enough volume as happens when a massive star collapses.
这颗快速旋转的恒星是脉冲星,也就是大质量恒星爆炸后经内部坍缩形成的超高密度星体。
The fast-spinning star is a pulsar, a superdense chunk of matter left over when a massive star explodes, then collapses in on itself.
脉冲星是某一恒星群发生爆炸形成超新星后所遗留下来的密核。
Pulsars are the dense cores left over after stars of a certain mass explode into supernovae.
当开关受到分时激光脉冲连续撞击时,就会形成一个强大的电场。
As the switches are hit by a carefully timed sequence of laser pulses, a powerful electric field is created.
当过热或者高电流或电压脉冲导致触点焊接在一起时,就会发生接触故障,形成短路。
Contact failure can occur when excessive heat or a high current or voltage pulse causes the contacts to weld together, resulting in short circuits.
方法采用超声脉冲反射法,着重就血栓形成过程中对其声速变化的相关性进行了定量研究。
Methods By using the ultrasound pulse reflection law, the correlation between the process of thrombosis formation and changes in the ultrasonic velocity was studied quantitatively.
结果表明,掺铒光纤激光器中两正交偏振态的反馈及其耦合对光脉冲的形成及控制的重要性。
The results show that the feedback and couple the two orthogonal states of polarization are important for formation and control of optical pulses in EDFL.
分析了飞秒激光脉冲在大气中传输时光丝的形成机理。
The mechanism of filamentation formed by femtosecond pulse laser beam propagating in atmosphere is investigated.
讨论了脉冲放电工艺参数对涂层形成与涂层硬度的影响。
The effect of the pulse discharging parameters on the formation and hardness of the TiC coating was investigated.
文中对柴油机脉冲增压系排气管中排气脉冲的形成过程作了简单明确的说明。
A succinct explanation on the process of the formation of exhaust impulse in exhaust pipe of a diesel engine with pulse system is made.
文中对柴油机脉冲增压系排气管中排气脉冲的形成过程作了简单明确的说明。
A succinct explanation on the process of the formation of exhaust impulse in exhaust pipe of a diesel engine with pulse system is made.
应用推荐