不幸的是,SEIA报告假定这样的情景,它的作者依据的是美国出口相当宽泛的标准,其中包括了像二氧化硅这样的原材料和美国的机器出口。
Unfortunately, for the SEIA report to suggest such a scenario, its authors relied on an unprecedented, broad measure of U.S. exports, which included raw materials like silica and U.S. machinery.
下表以美国材料实验协会ASTMD 2855“聚氯乙烯(PVC)管道和管件液状粘固剂连接标准规程”有关标准制定。
The following table is based on the guidelines of ASTM D 2855, "Standard Practice for Making Solvent-Cemented Joints with Poly Vinyl Chloride (PVC) Pipe and Fittings".
最终得到的新型塑料合金轴承材料力学性能可达到或超过美国国防部颁布的MIL-B - 17901(船舶)军用标准。
Then the new material for BTG water lubrication plastic alloy bearings is get. Its mechanic capability should attain or exceeded MIL-B-17901B standard (shipping) issued by US DOD.
潜水电机壳体,包括机架,尾轴承架,法兰和罩盖总装,必须采用符合美国材料试验协会ASTM A - 48类别30标准的、密实的铸铁或更好的材料制造。
The submersible motor enclosure including frame, end brackets, flanges and cap assembly shall be constructed of close-grained cast iron, ASTM A-48, Class 30 or better.
美国标准室内用品燃烧性测试套具,测试软垫座椅材料的可燃性。
American Standard seat incendiary tester, test padded seats combustible materials.
这是美国红阀公司为夹管阀标准配置的套管材料。
This is Red Valve's standard sleeve material for Pinch Valves.
在美国材料试验协会标准ASTMC1550圆板试验方法基础上,提出一种改进的基于裂缝宽度量测技术的纤维混凝土(FRC)材料静定圆板试验方法。
Based on standard test method ASTM C1550 for fibre reinforced concrete (FRC), a modified round panel test method for the material performance of FRC by measuring crack opening width is presented.
美国标准室内用品燃烧性测试套具,测试软垫座椅材料的可燃性。
American standard seat incendiary tester, test padded seats combustible materials. Test, test kits by the standards of the bubble and the unknown fabric cover.
最后对这种谐振型吸收材料的阻燃性进行了测试,达到美国UL94V-1级标准。
The testing of its flame retardant shows that this absorber meets the USA UL94V-1 standard well.
东尚的产品皆采用游艇级的材料做成,并符合美国短艇和游艇委员会(abyc)所推荐的标准要求。
All Eastsun Marine products were made from Marine grade material and meet the stringent requirements recommended by American Boat and Yacht Council (ABYC).
采用最新高科技材料,符合美国国际防紫外线UV 400标准,强效阻挡紫外线照射。
Using latest Hi-Tech materials, strongly prevent from UV according to USA's International standard UV400.
美国材料试验协会ASTME84 - 01《关于建筑材料表面燃烧特性的标准测试方法》。
ASTM E84-01 Standard Test Method for Surface Burning Characteristics of Building Material.
公司采用美国、阿根廷、澳大利亚的A级原料皮及德国、意大利等国外先进的化工材料,质量达到国际标准。
Moreover, our company imports fine raw materials from Arentina, America, Australia, and industrial chemicals from Germany, Italy to ensrue the quality up to the international standard.
这些原材料都符合出口美国,欧盟等SGS测试标准,属环保性产品。
These original materials are all in accordance with the SGS test standards of the United States and Europe, so our products are safe.
用该项新技术所生产的硬硅钙石型硅酸钙保温材料,其性能达到美国和日本同类产品标准。
The physical properties of production made by this technology are conformed with the standard of ASTM and JISA.
美国材料试验协会ASTMD2197- 98(2002)《有机颜料在刮擦下的附着性标准测试方法》。
ASTM D2197-98 (2002) Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion.
阀杆材质是符合美国材料试验协会ASTMB 371标准抗失锌现象的硅青铜,或B 99低锌合金,不含石棉的填料,和可锻或球墨铸铁手轮。
Stems shall be of dezincification-resistant silicon bronze ASTM B 371 or low-zinc alloy B 99, non-asbestos packing and malleable or ductile iron handwheel.
阀体、阀盖、附属件和控制止回阀均符合美国材料试验协会ASTM的半红铜合金分类标准。
Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass.
通过金属在腐蚀和冷却水中的腐蚀试验(美国材料试验学会标准ASTMD1384),缓蚀效果较为满意。
Subjected it to corrosion test in water of corrosion medium and cooling water medium (according to ASTM D1384-80), a result of satisfactory inhibiting corrosion behavior is obtained.
并对管状织物、纺织内衬软管与纺织内衬钢管的基本性能进行了测试,测试结果表明产品符合美国材料和试验协会标准。
In order to simplify the conformation and transform of complex weaves matrix, this paper described a new method of conforming tubular weaves by using MatLab program.
并对管状织物、纺织内衬软管与纺织内衬钢管的基本性能进行了测试,测试结果表明产品符合美国材料和试验协会标准。
In order to simplify the conformation and transform of complex weaves matrix, this paper described a new method of conforming tubular weaves by using MatLab program.
应用推荐