缓冲层塑性变形愈大,接头强度愈高。
The larger the plastic deformation of the buffer layer, the higher the joint strength.
中间阶层是社会利益结构中的缓冲层。
The middle class is a buffer layer in the structure of social interests.
为了解决这个问题,我们引入了缓冲层。
In order to resolve this problem, we have introduced the buffer layer.
额外的缓冲层可以包含以下相同的步骤。
Additional buffer layers can be included following the same steps.
发现薄膜的表面形貌强烈地依赖于缓冲层的厚度。
It was found that the morphology of the surface strongly depended on the thickness of the buffer layer.
主要考察了氮化温度和氮气流量对缓冲层生长的影响。
The influence of nitridation temperature and nitrogen flow rate on the growth of buffer layers is emphasized.
美国公司为困难时期设立了现金缓冲层,不太可能再次出现这类冲击。
The cash buffer corporate America has built up in case of harder times makes a fresh shock of that kind unlikely.
最后作者提出了设计梯度材料作为专用缓冲层材料的设想。
Finally, an idea of designing gradual materials as buffer layer between metal and ceramics was suggested.
调拨资源以构建缓冲层,是一个社会必须做出的最重要选择之一。
The choice of funding buffers is one of the most important decisions that societies must make.
此外,缓冲层可以减少晶体管之间的设备和硅衬底平行的传导问题。
In addition, the buffer layer can mitigate parallel conduction issues between transistor devices and the silicon substrate.
其纱辫充当除了护套外的防震缓冲层,同时又可以作为铜线和胶带间的绑带。
The braid is used as an additional shield, which creates the shock-absorption layer beyond the jacket and at the same time is a bandage for the copper tapes screen.
在一较佳实施例中,所述缓冲层是一硬磁材料,而所述吸收层是一软磁材料。
In a preferred embodiment, the buffer is a hard magnetic material, and the absorber is a soft magnetic material.
缓冲层资源可能是昂贵的抗震建筑材料,其抗震挠性每个世纪只用得上一两分钟。
The buffer may encompass expensive building materials whose earthquake flexibility is needed only for a minute or two every century.
此外,缓冲层地址和缓解晶格薄膜之间的不匹配而相对形成晶体管和硅衬底上。
In addition, the buffer layer addresses and mitigates lattice mismatches between the film relative to which the transistor is formed and the silicon substrate.
研究了芳纶帘线的物化性能、动态力学性能及芳纶带束层(缓冲层)轮胎性能。
The physicochemical properties and dynamic mechanical properties of aromatic polyamide cord and the performance of tire with aromatic polyamide belt were investigated.
过滤器包括带有连续通孔的过滤网,在过滤网的上表面粘接有高温分解的缓冲层。
The filter comprises a filter meshwork with continuous through holes, a pyrolysis buffer layer is stuck on the upper surface of the filter meshwork.
舱室很空,覆有棉质衬垫缓冲层。四个大箱子被安装在舱室中以在测试飞行时收集数据。
The cabin remained largely empty and was padded with a layer of cotton insulation. Four large boxes have been installed in the cabin for collecting data during test flights.
在此基础上得出了脊波导结构调制器中缓冲层厚度对特征阻抗和有效介电常数的影响特性。
On the basis of this calculation, the impact of the SiO2 buffer layer thickness on the characteristic impedance and dielectric constant in the modulator with a ridge structure is obtained.
由于本实用新型采用了设有缓冲层的支脚,所以能够缓冲撞击,并且结构简单,加工方便。
Since the utility model adopts a support leg with a buffer layer, and therefore, impact can be buffered, and the support leg has simple structure and convenient processing.
模拟结果表明,缓冲层与透明阳极各自区域中的杂质总量是决定GCT的通态压降的关键因素。
Simulation results show that the total amount of impurity in the buffer layer or transparent an - ode is the key to determine the on-state voltage drop of GCT device.
氮化镓是增长了等离子体辅助(111)和分子束外延(001)硅衬底上氮化硅缓冲层使用铪。
Gallium nitride is grown by plasma-assisted molecular-beam epitaxy on (111) and (001) silicon substrates using hafnium nitride buffer layers.
最后探测锡球配置方式和缓冲层材料性质对于锡球疲劳寿命的影响,以获得高可靠度的封装结构。
Furthermore, the effect of solder ball layout and stress relax buffer layer material on the fatigue life of solder joints is studied.
采用溶胶-凝胶法在硅基板上先分别制备钇稳定氧化锆(YSZ)和钛酸锶(STO)两种薄膜缓冲层。
The yttrium-stabilized zirconia(YSZ)and strontium titanium(STO)film buffer layers were prepared by Sol-gel process on Si substrates.
本发明提供的具有缓冲层结构的电阻转变型存储器制造工艺简单、制作成本低并且与传统CMOS工艺兼容。
The resistance transformation type memorizer with a buffer layer structure has simple manufacturing process and low manufacturing cost, and is compatible to the traditional CMOS process.
为了降低水泥膨胀所引起的膨胀应力,延长瓷绝缘子的使用寿命,在胶装时一般在瓷体和水泥之间涂一层沥青缓冲层。
In order to reduce the expansion stress resulting from cement's expansion and prolong the life-span of porcelain insulator, a thin asphalt buffer layer is coated between the porcelain and the cement.
紫外固化光纤缓冲层涂料性能,主要考虑的是缓冲层涂料的光固化速度、缓冲层的强度、缓冲层的剥离力及缓冲层的附加损耗等性能。
As for the performance of UVcured optical fiber buffer coating, the main concerns are the curing speed, strength, stripping force and additional loss of the buffer layer.
PACOTHANE是一种剥离膜,在多层板的各个层之间提供了一种既快捷又方便的可剥离性,并同时作为一种缓冲层,以保护铜箔因板缺陷或空气悬浮污染物而导致坑斑和凹痕。
PACOTHANE is a Release Film that provides quick and easy release between multilayers and serves as a buffer to protect copper from pits and dents caused by defective plates and air-born contaminants.
PACOTHANE是一种剥离膜,在多层板的各个层之间提供了一种既快捷又方便的可剥离性,并同时作为一种缓冲层,以保护铜箔因板缺陷或空气悬浮污染物而导致坑斑和凹痕。
PACOTHANE is a Release Film that provides quick and easy release between multilayers and serves as a buffer to protect copper from pits and dents caused by defective plates and air-born contaminants.
应用推荐