而零件是否能达到加工要求，主要取决于机床本身动力头的设计与制造精度是否达到了一定的程度。
But whether the parts can achieve processing requirements, mainly depends on the machine head itself in the design and manufacture of precision is achieved certain degree.
在重复观测的条件下，手持GPS测量面积的相对误差可以达到2.0％，基本满足林业生产中测量面积的精度要求。
Under the condition of re-observation, the relative errors of measuring area with the pocket GPS could reach 2.0% , which could meet the precision demand of measuring area in forestry practice.
实际运行表明：该系统可靠高，达到测试精度要求，并实现完全自动化。
Its running shows it has high reliability, obtains measuring accuracy demand and realizes complete automation.
而一般来讲，大多数的风机转子都是属于刚性转子，通常在低速平衡就能达到和保证风机转子的使用精度要求。
Generally speaking, most of the wind turbine rotor is a rigid rotor, usually at low speed balance can be achieved and ensure the accuracy of the use of wind turbine rotor.
其测量精度已达到应用要求。
通过设置循环语句的不同步长，可达到工艺要求的计量精度。
The metering accuracy required by the process can be realized by setting the different step lengths of recurring sentences.
目前对于太阳和地球引力变化引起的微振动，采用先进的主动控制能达到高精度的隔振要求。
Adopting the active control can meet the isolation demand high accuracy for tiny vibration induced by the gravitation variation between the sun and the earth.
实验结果表明系统在内部模型数小于10时识别精度高，达到安全保密的要求。
The experimental results show that the designed system has high identity precision when the interior model amount is less than 10 and can achieve the request of safety-secrecy.
残余应力及装夹应力容易使刚性差的薄壁件引起较大的加工变形，而传统工艺难以使其达到精度要求。
But because of their poor rigidity, it is easy to bring machining deformation caused by the existence of the residual stress and the fixing stress.
从结果可以得出测量的精度达到要求。
实验证明所选电机达到了设计要求，工作性能稳定，控制精度良好，具有较好的可操作性。
The results indicate that the control system can meet the design request, and it has good stability, high controlling accuracy and well-operating capability.
在测量精度要求较高的场合，直接利用FFT频谱估计显然无法达到精度要求。
It's apparently difficult to meet the requirement of accuracy by using of FFT directly.
经实验表明，该系统性能稳定，测量精度和实时性都达到了预期要求，具有很好的应用前景。
Indicating by the experimentation, the system has the stable capability, measurement precision which have reached the anticipate requirement, and has a good practical future.
分别通过刀具变形分析来选择合理的切削用量和改变加工方案等方面考虑来保证夹块精度，以达到使用要求。
The tool deformation analysis is used to select the rational cutting parameter and change the processing scheme for ensuring clamp block accuracy, to achieve the use requirement.
该陶瓷型用于制作金属工艺品，尺寸精度和表面粗糙度均达到技术要求。
Both dimensional accuracy and surface roughness of the metal handicraft in ceramic mold meet technological requirement.
用实验验证这种匹配方法是行之有效的，经匹配后仪器的精度达到设计要求。
According to the experiment, the matching method is effective and the precision of the instrument meets the designing requirement after the matching.
从训练曲线和检验曲线上看，软测量仪表达到一定的精度，满足工程要求。
From the training and testing curve, software instruments obtain certain accuracy, satisfying the requirement of project.
用该工艺加工的部件完全达到设计和装配精度要求。
The parts machined with this process can meet the requirement of the design and assembling accuracy.
通过试验验证了该校准盘系统的转速稳定性并证明线速精度均达到或优于设计参数的要求；
It is verified experimentally that both stability of rotating speed and accuracy of linear velocity of this calibrating disk system have achieved or exceeded the desire of designing parameters.
实验结果表明根据各环节误差分析结果设计的系统的检测精度达到了设计要求。
The experimental result shows the intelligent pressure detection system can meet the request of design precision.
其运算速度和精度均达到实用要求。
Both calculation speed and precision are up to required practical application.
结果表明，我们的计算精度可达到国内流动VLBI观测数据处理的要求。
The simulate computations from real observational data of VLBI Network proved that the accuracy of KVLBI has satisfied the requirement of mobile VLBI data processing in China.
只要训练样本可靠，采用该方法建模可以达到比较高的精度要求。
Modeling with this method can achieve high precision if the training samples are reliable.
通过调节机构的改进，重复精度达到了要求，减少了废品量，节约了成本，提高了生产效率。
By improving the adjusting mechanism, the resetting accuracy meets the needs, the waste and the cost are reduced, and the production efficiency is raised.
小失准角情况的惯导快速匹配对准方法研究已经比较成熟，在快速性和精度方面达到了使用要求。
The rapid matching alignment method of the inertial navigation system(INS) for the small misalignment had already been more mature, and had met the requirements from rapid and accuracy.
通过实际应用证明：该检测放大电路在测量范围、测量精度上都达到了一定的要求。
It is proved practically that the measure range and the precision of the check amplifier have met the demand for users.
该算法应用于核子计的数据处理，其计算速度和精度达到了设计要求。
The numerical accuracy and computing speed are satisfied when the algorithm is used in the nucleometer.
实践证明，龙华松花江特大桥成桥后的线形和合拢精度均达到施工规范的要求。
Practice results proved that the closure precision and the alignment of bridge after being folded reached the demands of the construction criterion.
实践证明，龙华松花江特大桥成桥后的线形和合拢精度均达到施工规范的要求。
Practice results proved that the closure precision and the alignment of bridge after being folded reached the demands of the construction criterion.
应用推荐