推荐了获取自粉化料的最佳条件。
微粉化物及包合物均有良好的稳定性。
Both micronized glibenclamide and inclusion complex were fairly stable.
一种是出现裂纹的龟裂粉化。
研究了采用硼酸抑制烧结矿粉化的机理。
The paper studies the mechanism of suppressing the powdering of sintered ore with boric acid.
耐候性能好，长期户外使用不粉化，不开裂。
Good weather resistance, no pulverization and crack after staying outdoor for long time.
且微粉化过程无结合溶剂损失及晶型转化发生。
No loss of combined solvent or crystal form transformation were observed during micronization.
非常适用于粉化的旧漆膜和吸收力较强的墙面。
Ideal for powder coating and the absorption of the old strong walls.
介绍了喷洒卤化物，降低烧结矿粉化率的机理。
The mechanism of decreasing sinter degradation index by spraying halide at its surface is introduced.
烧结矿在高炉炉身上部会发生低温还原粉化现象。
The phenomenon of sinter degradation takes place in the upper shaft of blast furnaces.
研究内外墙乳胶漆粉化现象，并提出了相应的解决方法。
The paper researched chalking phenomenon oi emulsion paint for exterior and interior wall and gave some relevant resolution method.
长水口密封碗高温性能好，在开浇后高温下不粉化、不粘附；
Elongated nozzle sealing bowl has better resistance to high temperature. There is no pulverization and no adhesion after casting.
实验结果表明，合金氮化反应完全，氮化产物疏松易于粉化。
The results show that the nitridation rate of the raw alloys is higher, and the nitridation products are porous enough to be easily crushed.
钢渣在蒸压条件下的膨胀粉化是改善其稳定性的一个重要方法。
The expansion pulverization of steel slag in the autoclave is an important way to improve its stability.
产品系列包括蒙旦蜡、聚烯烃基蜡、酰胺蜡与其它微粉化的蜡。
Our portfolio comprises Montan wax based products, polyolefin and polymeric based waxes, as well as amide waxes and their micronized grades.
用自粉化微碳铬铁炉渣生产彩色水泥是冶金渣生产特种水泥的突破。
To produce the colour cement by using self-powdered ultralow carbon-ferrochromium slags is a breakthrough of special cement production and is firstly created in the country.
当镁盐晶须含量为3%时，泡沫粉化程度和回弹性改善达到最优值；
Optimal powdering degree and elastic resilience were achieved when the content of whisker was 3%.
本产品具有强度高、磨损低、水浸不变软、不膨胀、不粉化、不破裂。
This product has high strength, low wear and tear, flooding the same soft, non-swelling, non-powder, not broken.
一种超细吸入型糖皮质激素药物粉体的制备方法属于药物微粉化领域。
The preparation process of superfine inhaled glucocorticoid medicine powder belongs to the field of medicine micronizing technology.
本文研究了白云石煅烧性能及煅烧后粉化率与矿物相形貌与结构的关系。
In present study, the mineral phase and the structure of the dolomite was investigated focus on its calcining performance and pulverization after calcining.
影响涂层粉化的主要因素是光老化，氙灯光老化对涂层起泡无明显影响。
Chalking is the main phenomena of coating under Xenon-arc radiation, and this test had no effect on the coating blistering.
新生铁的触媒作用。实验证明析碳对矿物粉化及耐火材料都有一定作用。
The experiment proved that carbon precipitation does have certain effect on iron ore degredation and refractory.
乙烯裂解炉经多年运行，炉衬粉化严重，炉壁散热损失较大，热效率下降。
After operation of ethylene cracking furnace for many years, the furnace lining was effloresced seriously. The radiating heat loss of furnace wall was larger.
表面用氟碳涂料处理，具有耐腐蚀、耐粉化、耐紫外线照射不变色等优点。
With fluorocarbon coating, its performance in corrosion resistance, ultraviolet resistance is excellent.
分析了白色丙烯酸-聚氨酯汽车面漆粉化的原因，并提出了防止粉化的措施。
Powdering of white acrylic acid-polyUrethane automobile painting was described. Measures were proposed to prevent powdering.
目的：氯尼达明水溶性差，本文旨在研制其微粉化片剂处方并考察其稳定性。
Objective: Lonidamine is limited in their therapeutic value by properties such as low water solubility, poor bioavailability.
钒钛烧结矿液相组成复杂，存在生产率低、转鼓强度差、还原粉化严重等现象。
Vanadium-titanium sinter has a complex liquid composition, which exists the phenomena such as low productivity, poor drum strength and serious RDI.
反洗频率低，抗压强度高，不粉化、不板结，比表面积大，活性高，再生效果好。
The backwashof low frequency, high compressive strength, no powder, no hardening, high activity and large specific surface area, good regeneration effect.
龟裂，起甲，褪色，酥碱，空鼓，粉化，霉变，脱落……各种致命的症状写满了。
Cracked, flaked, faded, disrupted, detached, powdered, mildewed, such are the fatal symptoms in the diagnosis.
实践表明，采取合适的技术措施可以解决粉化、起皮及剥落、变色及褪色等质量问题。
Practice indicates the problems in quality such as crushing, wrinkling and shelling, discoloring and fading can be solved by taking appropriate measures.
实践表明，采取合适的技术措施可以解决粉化、起皮及剥落、变色及褪色等质量问题。
Practice indicates the problems in quality such as crushing, wrinkling and shelling, discoloring and fading can be solved by taking appropriate measures.
应用推荐