这些层已采用火焰或等离子喷涂。
因此粗粉在适当功率下更适合低能等离子喷涂。
So coarse powder is more suitable for low power plasma spraying.
阐述了反应等离子喷涂(RPS)方法的基本思想。
The basic idea of the reactive plasma spray (RPS) was presented.
用碱处理方法对等离子喷涂的钛涂层进行了表面改性。
Plasma sprayed titanium coatings were modified by alkali treatment process.
通过数值模拟研究了等离子喷涂陶瓷粒子的加热加速行为。
The calefaction and acceleration process of ceramic powders in plasma spray were studied by numerical simulation.
等离子喷涂纳米陶瓷涂层是目前纳米涂层领域的研究热点之一。
A review is given on the research progress in nanostructured ceramic coatings prepared by plasma spraying at home and abroad.
并提出需要研究的问题，展示了等离子喷涂更加广阔的应用前景。
It also points out the matters needed to study, and exhibits the bright applied future of plasma spraying.
在采用常规高能等离子喷涂设备的基础上，配备了液料送进系统。
The feeding system of liquid feedstock was equipped on the bases of general high energy plasma spray equipment.
等离子喷涂纳米陶瓷涂层的研究是目前纳米涂层领域研究热点之一。
Study on plasma sprayed nanostructured ceramic coating is one of the present promising fields in nanostructured coating.
能量密度较小的激光重熔试样具有高于等离子喷涂试样的热震寿命。
It was indicated that the higher laser energy input is harmful for thermal shock lifetime of LR TBCs.
通过实例，阐述了等离子喷涂陶瓷粉末技术应用中应注意的技术问题。
Technical problems to which due attention should be paid in applications of the ceramic powder plasma spraying technique were expounded in this paper through practical examples.
结果表明：低压等离子喷涂涂层的滑动磨损量小于空气等离子喷涂涂层。
The results indicate that the wear loss of WC - co coating plasma-sprayed at low-pressure is less than that in air.
综述了等离子喷涂的特点，以及涂层的一些应用领域及其复合处理技术。
The paper summarizes the characteristic, some application fields and composite process technology of plasma spraying.
对有关等离子喷涂陶瓷涂层的性能、失效机理和寿命预测模型进行了综述。
The paper gives a review on properties, failure mechanism and life prediction models of plasma sprayed ceramic coatings.
等离子喷涂技术是一项应用极广的热喷涂技术，占喷涂工艺的40％以上。
The spraying technology of plasma is a widely used hot spraying technology, accounting for more than 40% of the spraying craft.
表面敷层方面介绍了铸造铝合金的等离子喷涂、电化学方法的研究现状；
Then, for surface cladding layer, advances in the plasma and electro-chemistry methods are reviewed.
测定了所获得复合粉末的性能，进行了等离子喷涂试验，检查了涂层的性能。
The properties of the composite powders obtained were determined and the plasma spraying experiments were carried out to examine the properties of coating layers.
目前制备高性能涂层常用的方法有等离子喷涂、电弧喷涂、超音速火焰喷涂等。
There are some methods that are plasma spraying, arc-spraying and hypersonic flame spraying technology to prepare alloy coating with high erosion and corrosion resistance.
本文详细阐述了国内外学者对金属基等离子喷涂羟基磷灰石人工骨的研究状况。
The study on artificial bone of plasma - sprayed hydroxyapatite coating on metal substrates is described in international range.
综述了等离子喷涂结构涂层的研究进展，包括耐磨涂层、热障涂层、耐蚀涂层；
Progress of research on the plasma sprayed structural coatings, including WBCs TBCs and CRCs, was summarized.
利用等离子喷涂技术在工件表面制备抗高温氧化涂层，能显著提高工件的抗氧化性能。
Oxidation resistance coatings prepared by plasma spraying process on the surface of workpiece can improve oxidation resistance.
介绍了一种基于零电压软开关技术和双闭环控制模式的大功率等离子喷涂高频开关电源。
A novel plasma spray power supply based on ZVS soft-switching technology and double close loop control mode is presented in this paper.
等离子喷涂技术是零件表面强化与防护的新工艺，在许多产品的设计上得到了广泛的应用。
The plasma spraying techniques, which have been widely used in many products design, is a new kind of technology for hardening and protecting parts surface.
分析了等离子喷涂逆变器在高电压大电流条件下，高频变压器参数设计和IGBT保护问题。
The designing parameters of high frequency transformer and the protecting IGBT in plasma spraying inverter with high voltage and large current is analyzed in this paper.
研究了等离子喷涂耐液锌腐蚀陶瓷涂层，提出了等离子喷涂耐液锌腐蚀陶瓷涂层的设计方案。
Plasma sprayed ceramic coatings with good corrosion resistance to liquid zinc were studied. Providinh a new project of liquid zinc corrosion coating by plasma spraying.
试验用两种性能不同的钼粉与同一种镍基合金粉混合，进行了工业等离子喷涂活塞环对比试验。
Separately Mixed two different property molybdenum powder with the same nickel-chromium-boron-silicon alloy, then carried out plasma spray piston ring experiments.
针对等离子喷涂设备设计出分布式控制系统，介绍了等离子喷涂分布控制系统的软、硬件结构。
A distributed control system is designed for plasma spraying equipment and the configurations of system's software and hardware are discussed.
针对等离子喷涂设备设计出分布式控制系统，介绍了等离子喷涂分布控制系统的软、硬件结构。
A distributed control system is designed for plasma spraying, and the software and hardware are given out.
针对等离子喷涂设备设计出分布式控制系统，介绍了等离子喷涂分布控制系统的软、硬件结构。
A distributed control system is designed for plasma spraying, and the software and hardware are given out.
应用推荐