心必须静止。磨刃时你还必须维持那股恰到好处的压力。
The mind has to be still, and you have to maintain just the right amount of pressure constantly as you sharpen the blade.
为了设计新型微钻头数控刃磨机床,对新型微钻头刃磨的关键技术进行研究。
To design NC grinding machine, the sharpening key technology for new micro-drill point is researched.
介绍了用于刃磨齿轮滚刀的简易对中装置的结构、原理及使用方法。
The structure, principle and application of a simple centring device used for the sharpening of hob cutters are described.
提出了利用外锥面砂轮实现内锥面刃磨钻头的方法,设计了实现该方法的连杆齿轮组合机构。
Present a method of sharpening twist drills in the interior conical surface and exterior conical surface grinding wheel. A novel sharpening device of linkage-gear compound mechanism is designed.
可加工性好,超硬体可采用条状或片状,刃磨方便快捷,砂轮损耗低。
The workability is good, the superhard body adopts the bar form or sheet form, the sharpening is convenient and quick, and the loss of the grinding wheel is low.
学习刃磨切断刀完全可以走捷径,以几何形状入手的方法,不但入门快,而且不出偏。
In sharpening tool cutters there is a shortcut mainly based on the geometric shape, which is not only easy to learn, but also can be very precise.
选择刃磨参数困难是钻尖刃磨的一个主要问题。
One of the major problems related to the drill point grinding is the difficulty in selecting grinding parameters.
阐述了麻花钻内锥面刃磨法的原理及参数的确定方法,揭示了内锥面刃磨中存在“翘尾”现象的原因并提出了相应的解决措施。
The inner cone grinding method of twist drills is discussed. The phenomenon of up tail in the grinding method is exposed and the solving idea is given.
根据设计参数精确并唯一地求出刃磨参数,解决了刃磨参数求解的不确定性问题。
The solution of grinding parameters is obtained from the given design parameters. The grinding parameter redundancy problem is resolved.
研究了在金刚石刃磨和电金刚石刃磨时硬质合金刀片上引起的残余应力,及其对硬质合金强度的影响。
In this paper, a residual stress on cemented carbide inserts caused by grinding of diamond and electrical grinding of diamond, and its effect on cemented carbide strength are studied.
基于上述原因,本文对PCD刀具的刃磨机理,刃磨工艺条件对刃磨质量及刃磨效率的影响进行了深入研究。
To solve these problems, this thesis did a lot of researches on the grinding mechanism of PCD cutting tool and the influences of parameters on grinding quality and efficiency.
根据刃磨的运动关系建立了新型微钻头横刃修磨的数学模型并求出了刃磨参数。
Based on the kinematic relationship of regrinding, a mathematical model was established for the chisel edge regrinding and the solution of grinding parameter was obtained.
根据旋转锉刃磨运动模型和刃磨机床结构,开发了基于IPC的旋转锉数控刃磨系统。
According to the grinding motion model and the machine tool structure of rotary burrs, the IPC-based NC system of rotary burrs grinding is developed.
根据刃磨运动关系建立钻尖刃磨的数学模型。
Based on the kinematic relationship of grinding, the mathematical model of grinding parameter has been formulated.
铁磨铁,磨出刃。朋友相感,也是如此。
Iron sharpeneth iron; so a man sharpeneth the countenance of his friend.
a型钻头磨刀机结构简单,使用方便,一次装夹就可以完成钻头的钻尖和横刃的修磨。
ZZM-A drill grinder simple structure, easy operation. One setup to complete grindings on drill web and chisel edge.
分析了该钻头的结构和刃磨特点,进行了振动钻削试验。
The structures and tool grinding features were analyzed and vibration drilling experiments were done.
给出螺旋面钻尖刃磨机床的基本结构及其工作原理。
Basic structure and operation principle of the parallel grinder for helical drill point grinding is presented.
建立了刃磨运动数学模型。
分析了平面钻尖的刃磨方法,并对其几何特性进行了分析和求解。
The grinding methods of planar drill point are discussed. Geometric characteristic of planar drill point is analyzed and solved.
用于外齿轮加工的径向剃齿刀,其齿向曲线为内凹超越曲线,这给剃齿刀的刃磨带来了困难。
The tooth curve of a plunge shaving cutter for an external gear is a recess transcendental curve, so it is difficult to grind it.
研制了卷装背心袋式塑料制袋机用新型滚刀,在刀具结构、材料、热处理工艺和刃磨技术等方面进行了全面的改进和更新。
The new rolling cutter for the recoiling vest-like plastic bag manufacturing device is developed, the structure, material, heat treatment process and edge grinding techniques are improved.
本文建立了基于渐开圆柱面的SPLIT钻数学模型,并进行了实际刃磨。
This paper established the mathematical model of SPLIT drill basing on the involute cylindrical surface, and conducted real edge grinding.
为了提高新型微钻头的钻削性能,提出了一种适合于微钻头的横刃修磨原理及方法。
To raise drilling performance of new micro-drill, a novel method was advanced for reginding of chisel edge.
本文介绍了采用接触轨迹原理结合自动编程刃磨指状齿轮铣刀的新方法。
In this paper, a new method in which the principle of the contact trace is combined with auto programming in grinding a finger gear cutter is introduced.
要设计和控制虚轴钻尖刃磨机,首先要建立描述钻头的数学模型。
To design and control the virtual axis drill point grinding machine, mathematical representation to describe the drill point configuration is badly needed.
后刀面热损伤层的定量分析,可以为确定最小刃磨余量提供理论支持。
The study of thermal damage layer for the major flank can provide theoretical guidances for determining the minimum machining allowance of edge grinding.
介绍了以回转双曲面作为麻花钻后刀面的数学模型,研究了钻头设计参数与刃磨参数的关系。
Mathematical model for twist drill hyperboloid grinding is introduced. The relationship between drill design para meters and grinding parameters is studied.
介绍了以回转双曲面作为麻花钻后刀面的数学模型,研究了钻头设计参数与刃磨参数的关系。
Mathematical model for twist drill hyperboloid grinding is introduced. The relationship between drill design para meters and grinding parameters is studied.
应用推荐