本文介绍了测量线圈匝数的方法—磁压相位比较法。
This paper introduces the methods of using the magnetic pressure phase method to measure the number of turns measurement.
报导了对爆炸磁压缩发生器(MFCG)的爆炸管进行的爆轰试验结果。
This paper describes the detonation experimental result obtained by Magnetic Flux Compression Generator (MFCG) explosive tube.
爆磁压缩发生器常用来驱动脉冲调制器，在二极管上产生高功率短脉冲。
The explosively-driven flux compression generators (FCGs) are always used to drive pulse modulators, and high power pulses can be generated on the diodes.
目的：验证内镜下通过磁压缩和支架置入建立胃肠吻合的安全性和成功率。
Objective: to investigate the safety and success rate of endoscopic creation of a gastroenteric anastomosis formed by magnetic compression and stent placement.
爆磁压缩发生器一般具有较低阻抗，在驱动较高阻抗负载时需要脉冲功率调制电路。
A novel power conditioning circuit for flux compression generators (FCG) to drive high impedance loads is presented.
低电压电磁压制成形方法比静力压制成形方法更能细化制品组织并提高某些压电性能。
This method can improve the piezoelectric properties and thin the microstructure, compared with the static compaction.
而作为一种强流爆炸脉冲能源，螺线管型爆磁压缩装置在脉冲功率技术中有着广泛的用途。
Being a pulse energy with the strong electricity exploding, HMCG (Helix Magnetic Flux Compression Generators) is widely used in the technology of pulse power.
文中介绍了由直流高压电路、脉冲放电电路和一级脉冲磁压缩电路组成的铜蒸气激光器电源。
The supply power of copper vapor laser (CVL) consisting of DC high voltage circuit, pulse discharge circuit and one stage magnetic pulse compression circuit is introduced here.
设计了一种含铝炸药爆轰产物导电式螺线型爆磁压缩发生器，分析其运行过程，得出等效电路模型。
A modified design of helical flux compression generator utilizing detonation products to compress flux was proposed, whose running process and equivalent circuit were acquired.
将电磁成形技术用于粉末材料致密度研究中，以PZT粉末为研究对象，对其进行低电压电磁压制成形。
Electromagnetic forming was applied to the powder material compaction, and PZT powder was compacted with low-voltage electromagnetic compaction.
我校继成功地将低电压电磁压制应用于金属粉末压制后，再一次率先将该工艺引入到功能陶瓷粉末的压制上。
After applying the technology of low-voltage electromagnetic compaction into making metal powder products, we tried to introduce this technology into the compaction of ceramics powder.
气门头可通过一次压制和烧结、两次压制和烧结、锻造和机加工、锻造和烧结及动磁压制成形和烧结而制成。
The valve head may be made by single press and sintering, double press and sintering, forging and machining, forging and sintering, and dynamic magnetic compaction and sintering.
直测式是将霍尔器件置于具有线圈绕组或直穿母线的环型铁磁体气隙中，测出气隙里的磁压降，即为被测电流。
The direct measure mode is that Hall part is set into the interspace of loop winding or magnet coil, then the magnetism voltage difference or the current is measured.
这些材料通过在所述头和所述杆之间有可能不同的制造技术结合，其中至少气门的一部分通过动磁压制成形而制成。
These materials are combined with fabrication techniques that may vary between the head and the stem, where at least a part of the valve is made by dynamic magnetic compaction.
采用有限元法是提高磁压力求解精度的有效途径，而确定求解区域及其边界上的磁场特性又是有限元方法的关键问题。
Of all the problems, magnetic pressure calculation is the basic one. FEM (Finite element method) is an effective method in enhancing the accuracy of magnetic pressure calculation.
介绍了CY- 1 0 1型磁压力式氧分析仪的样品气预处理系统和参比气预处理系统的改造及改造后的效果和优点。
The modification of pre-treatment system of CY-101 magnetic pressurized oxygen analyzer is introduced. The effects and advantages of the system after that are presented.
飞片型爆炸闭合开关可用做高功率闭合开关，因其结构简单，电流导通能力强，闭合迅速而适用于爆磁压缩发生器的爆炸开关同步。
Due to its simplicity in structure, ability in conducting heavy current and quick close time, it is suitable for explosive synchronization of magnetic flux compression generator (MFCG).
飞片型爆炸闭合开关可用做高功率闭合开关，因其结构简单，电流导通能力强，闭合迅速而适用于爆磁压缩发生器的爆炸开关同步。
Due to its simplicity in structure, ability in conducting heavy current and quick close time, it is suitable for explosive synchronization of magnetic flux compression generator (MFCG).
应用推荐