流化床系统结合了灵活性，高可靠性和低维修率。
The FLSmidth fluidized floor system combines design flexibility, high reliability and low maintenance.
流化床的一大优点在于能产生一个充分混合的具有很大表面积的流体与固体的接触系统，这对高效反应和传热都很有用。
A major advantage of fluidised beds is that they provide a well mixed, high surface area, fluid-solid system which is useful for efficient reactions and heat transfer.
与气-液系统不同的是，在流化床中气泡和连续相之间有气体交换。
As opposed to gas-liquid systems, there is an interchange of gas between bubble and continuous phase in fluidized beds.
将DEM方法与颗粒碰撞传热模型结合，在颗粒层次上对密相流化床内的传热过程进行了较为系统的数值研究。
Combining with particle impact heat transfer model, DEM method is also used to systematically simulate the heat transfer process in fluidized bed at the level of particle.
因此，很多带有脱硫系统的循环流化床锅炉采用静电除尘器、布袋除尘器联合使用。
Therefore, has the desulphurization system's circulation fluid bed boiler to use the electrostatic precipitator, the cloth sack dust remover union use.
热循环回路是循环流化床(CFB)锅炉的关键系统，其循环流动特性和热力特性直接影响CF B锅炉的安全经济运行。
The thermocycling loop is a key system of circulating fluidized bed (CFB) boiler, its circulating flow and thermodynamic characters directly affect safe and economic operation of CFB boiler.
流化床实际运行负荷的上限值可根据基本蒸汽负荷、流化床中树皮的稳定燃烧温度和减温系统的工作能力来确定。
The upper limit of operating load of the fluidized bed is determined by the basic load, stable combustion temperature of barks and the ability of the attemperation system.
文中介绍XMRA8000回路控制器功能，及其在循环流化床锅炉燃烧控制系统中的应用。
This article introduces the function of the XMRA8000 loop reservation controller, and its application in the combustion control system of CFB boiler.
介绍了生物质循环流化床气化的实验系统、实验方法和结果分析。
The experimental system, experimental method and result analysis of biomass gasification in a circulating fluidized bed are introduced.
通过自行设计和制作液固流化床分选设备，建立了初步的试验研究系统。
By independently designing and making the separation equipment of the Liquid-solid fluidized bed, an open experimental system has been established.
提出了由两级分离系统组成的循环流化床烟气脱硫工艺。
Flue gas desulfurization technology is proposed on the basis of a circulating fluidized bed composed of a two-stage separation system.
为此增设了流化床冷却系统，满足了扩产改造的要求。
For this purpose, a fluid-bed cooling system is added, to meet the requirements for renovation to enlarge capacity.
本文简要介绍石英细粉流化床干燥系统的设计和应用情况。
This paper introduces the design of a fluidized-bed drying system for wet recovered fine quartz powder and the result of its operation briefly.
在一定的基本蒸汽负荷下，燃树皮产汽负荷的上限值可根据流化床中树皮的稳定燃烧温度和减温系统的工作能力来确定。
The maximum steam load produced by the bark was determined by the bark fixed combustion temperature and the capacity of attemperator system when the basic steam load was given.
首先，在气固流化床实验系统台上，获取各流型的压力波动信号。
Firstly, on the gas-solid fluidized bed experimental system platform, we get all the flow pattern of the pressure fluctuation signals.
因此，作为循环流化床锅炉燃烧控制系统中的一个重要参数的床温的自动化控制水平一直无法得到有效提高。
So the low control level of the bed temperature, as an important parameter of circulating fluidized bed boiler, is keeping.
介绍了三相流化床烟气脱硫系统。
This paper introduces a system of flue gas desulfurization with the three-phase fluidized bed.
燃煤增压流化床的燃料制备与输送系统往往需采用气力输送方法送入加压罐后再送入炉内，系统复杂。
Preparation of fuel and transport system for coal fired pressurized fluidized bed always needs pneumatic method for feeding the fuel into the pressurized tank and then to the furnance.
介绍了一种采用固定化高效微生物与JADS曝气系统构成的处理高氨氮、高含硫废水的曝气生物流化床(ABFT)工艺。
Aerated biological fluid technology (ABFT) composed of fixed microorganism and JADS aeration system was adopted to treat high ammonia and high sulfide wastewater.
用光纤探头技术对三相循环流化床中的气泡大小及其分布进行了系统研究，实验测定了操作条件对气泡大小及其分布的影响规律。
The bubble size and its distribution has been studied in three-phase circulating fluidized beds by using the newly developed fiber optic probe system systematically.
建立了适用于烧碱法麦草浆黑液系统的三相循环流化床传热模型。
Flow boiling heat transfer mechanism in a three-phase circulating fluidized bed evaporator is analyzed, and then the heat transfer model used for wheat straw black liquor is proposed correspondingly.
在系统分析阐述循环流化床锅炉脱硫灰渣特性的基础上，探讨了各种综合利用方式，并推荐以烧结为主的脱硫灰渣利用方法。
Various comprehensive utilization routes are discussed based on the characters of the desulfurization ash derived from circulating fluidized bed boiler.
国产循环流化床锅炉完善化是当务之急，也是一项综合性的系统工程。
It is an urgent matter that the chinese-made circulating fluid bed boiler should be perfected; moreover, it 's also a comprehensive systems engineering.
建立了循环双流化床锅炉平衡通风风烟系统的数学模型，并对风烟系统的动态特性作了仿真研究。
Numerical model for balanced draft air and gas system for circulating double fluidized bed is established and simulative study on the dynamic characteristics of air gas system is made.
本文分析了流化床气流粉碎分级系统中的压力参数对流化床粉碎与涡轮分级机性能的影响。
The effects of pressure parameters in the system of fluid bed grinding and turbine classification on the properties of the fluid bed grinder and turbine classifier were analyzed.
论述了流化床锅炉脱硫原理及影响脱硫效率的主要因素，给出流化床锅炉脱硫系统改造设计中应注意的一些主要问题。
The main factors influencing sulphur removal efficiency of FBC is discussed, and some problems in the refurbishment and design of FBC desulphurization system are put forward.
循环流化床燃烧所需的空气主要由布风系统提供，在运行中起了非常重要的作用。
Combustion air requirements of the circulating fluidized bed boiler is supplied by air distributor equipment, it played a very important role at the operation.
为了提高大型循环流化床锅炉的控制水平，了解其燃烧系统的热工特性并建立适用于控制器设计的模型是第一步的工作。
Understanging the thermal characteristic and establishing suitable models is the first step in order to improve the control strategy of large scale CFB boilers.
为了提高大型循环流化床锅炉的控制水平，了解其燃烧系统的热工特性并建立适用于控制器设计的模型是第一步的工作。
Understanging the thermal characteristic and establishing suitable models is the first step in order to improve the control strategy of large scale CFB boilers.
应用推荐